Page 1
VC-WM15 Installation Guide
www.MyLumens.com
1. Package Contents
VC-W M15
Ceiling locking
Platform
2. Product Function Descriptions
Ceiling Locking Platform
3. Precautions for installation
3.1 Load Capacity: 3 Kg
3.2 Please follow the following steps carefully to ensure that the unit is installed
safely and securely.
3.3 Health and safety is important. Do not install this bracket on unstable ceiling
or in a position that may impede a thoroughfare.
3.4 It is recommended installation is carried out by two adults.
3.5 For full dimensions, please go to Area
https://www.MyLumens.com/Support
Height and Rotation
70-110cm
Anchors (wall plugs)/
Adjustment Knob
screws x 3 pcs
Hole for
Organizing Cables
Installation Guide
PTZ Mount
Angle Adjustment
Lumens website > Support > Download
Knobe
4. Instruction for installation steps
4.1 To install Ceiling locking Platform
Use *3 pcs of anchors (wall plugs) and screws to install the ceiling locking
platform to the ceiling
* For mounting 3 pcs screws, please refer to the corresponding location of A and B in the figure
below. Please do not mount arbitrarily to prevent insecure installation
* Pass through cables from the center hole of the ceiling locking platform and the bracket. Be
aware that the pass thru feature is not designed to accommodate large HDMI, RS-232 or SDI
connectors.
A
B
A A
4.2 Screw the bracket into the
platform for security
Adjust the bracket height and the angle of the
4.4
camera
→Adjust the bracket height: Rotate the
regulating ring and the bracketin in order to
move the head up or down.
* After adjustment, be sure to tighten the regulating ring
firmly
→Change the tilt position of the camera using
the Angle Adjustment Knob.
B
B
4.3 Mount the Camera
Securely attach the camera to the
PTZ mount.
5100455-50 DEC. 2021
Copyright ©2021 Lumens Digital Optics Inc. All rights reserved.
Loading...