Lumens Ladibug 3.0 User Manual
TM
Ladibug
3.0
Document Camera Image Software
User Manual - English
Table of Contents
1. Introduction ................................................................................................... 3
2. System Requirements .................................................................................. 3
3. Install Ladibug™ ........................................................................................... 4
3.1. Install with Windows Vista/7/8 ................................................................................... 4
3.2. Install with MAC ......................................................................................................... 6
4. Connection to the Hardware ......................................................................... 8
5. Start to Use Ladibug™ ................................................................................. 8
5.1. Use the USB cable to connect the camera to the computer ...................................... 8
5.2. Connect the Wireless Document Camera ................................................................. 9
5.3. Use the image sharing server to connect to the computer and camera ................... 10
6. Operation Interface Description .................................................................. 12
6.1. Windows interface ................................................................................................... 12
6.2. MAC interface .......................................................................................................... 21
7. Function Descriptions - For Windows ......................................................... 30
7.1. Turn on/off camera .................................................................................................. 30
7.2. I would like to optimize the image ............................................................................ 30
7.3. I would like to freeze the live image ......................................................................... 30
7.4. I would like to turn on/off the lamp ........................................................................... 30
7.5. I would like to zoom in/out images ........................................................................... 30
7.6. I would like to adjust the brightness ......................................................................... 30
7.7. I would like to capture images ................................................................................. 30
7.8. I would like to capture images continuously ............................................................ 31
7.9. I would like to record ................................................................................................ 31
7.10. I would like to annotate the displayed image ......................................................... 31
7.11. I would like to add textual annotation to images .................................................... 32
7.12. I would like to use the mask mode ......................................................................... 33
7.13. I would like to use the spotlight mode .................................................................... 33
7.14. I would like to manage stored image ..................................................................... 33
7.15. I would like to change the operating languages of the software ............................ 34
7.16. Change firewall settings ........................................................................................ 34
1
8. Function Descriptions - For MAC ............................................................... 36
8.1. I would like to turn on/off camera ............................................................................. 36
8.2. I would like to optimize the image ............................................................................ 36
8.3. I would like to freeze the live image ......................................................................... 36
8.4. I would like to turn on/off the lamp ........................................................................... 36
8.5. I would like to zoom in/out images ........................................................................... 36
8.6. I would like to adjust the brightness ......................................................................... 36
8.7. I would like to capture images ................................................................................. 36
8.8. I would like to capture images continuously ............................................................ 37
8.9. I would like to record ................................................................................................ 37
8.10. I would like to annotate the displayed image ......................................................... 37
8.11. I would like to add textual annotation to images .................................................... 38
8.12. I would like to use the mask mode ......................................................................... 38
8.13. I would like to use the spotlight mode .................................................................... 38
8.14. I would like to manage stored image ..................................................................... 39
8.15. I would like to change the operating languages of the software ............................ 40
8.16. Change firewall settings ........................................................................................ 40
9. Troubleshooting .......................................................................................... 42
2
1. Introduction
After installing the Ladibug™ application, you can use the software to:
Control the Document Camera.
Capture and record images.
Annotate the image, highlight important details and save it.
Support the full screen function.
2. System Requirements
Windows Vista / 7 / 8
Min CPU: Intel Core 2 Duo 2 GHz or above
Min Memory: 1GB (32-bits)/2GB(64-bits) RAM
Supporting Direct X 9 (WDDM 1.0 or later)
Min Resolution 1024 x 768
Min Hard Drive Space: 1GB
MAC OS X 10.7 / 10.8 / 10.9
Min CPU: Intel Pentium® 2GHz Intel Core 2 Duo
Min Memory: 1 GB DDR2 667 Hz RAM or above
Min Resolution 1024 x 768
24-bit color display monitor
Min Hard Drive Space: 1GB
QuickTime 7.4.5 or above
3
3. Install Ladibug™
3.1. Install with Windows Vista/7/8
1. Please download Ladibug™ software at Lumens website.
2. Extract the file downloaded and then click [Ladibug] to install.
3. The installation wizard will guide you through the process. Please follow the on-screen
instructions and press [Next] for the next step.
4
4. Press [Yes] to create Ladibug™ shortcut on your desktop.
5. Once the installation is completed, press [Finish] to restart the computer.
5
3.2. Install with MAC
1. Please download Ladibug™ software at Lumens website.
2. Extract the file downloaded and then click [Ladibug] to install.
3. Please finish the installation by following the on-screen instructions.
4. Click [Continue].
5. Click [Install].
6
6. Enter the username and password, and then press [Install software].
7. Click [Continue Installation].
8. Press [Restart] to finish the software installation.
7
4. Connection to the Hardware
<Very Important> To ensure successful installation, please follow each of the
following steps.
4.1. Connect the power cord of the Document Camera.
AC outlet
<Note> Appearance may vary depending on country/region.
4.2. Connect USB cable to the Document Camera and your computer.
4.3. Turn on Power .
5. Start to Use Ladibug™
Instructions for connecting Ladibug to the camera are provided below:
5.1. Use the USB cable to connect the camera to the computer
5.1.1. Double-click the [Ladibug] icon to launch Ladibug™.
5.1.2. If firewall warning occurs in the first use, please check the [LAN] and then press [Allow
to Access].
Safety Alert: Click [Unblock].
POWER Frequency setting page, please complete the settings following the instructions
on the screen.
A live image is displayed when the setting is finished.
Note: You are advised to confirm the local voltage/frequency before setting the POWER
Frequency. For example, 60 Hz is applicable for America, Taiwan, Japan, etc; 50 Hz is
applicable for Europe or other regions.
5.1.3. Start Using.
Note: If no image is displayed, follow the instructions to establish a connection:
Click
8
, open [Search Window], and select [USB Document Camera].
5.2. Connect the Wireless Document Camera
Firstly use this method to connect the computer to the Wireless Document Camera, for details
please refer to
Equipment requirements
One computer with WLAN Card
One Wireless Document Camera
5.2.1. Double-click the [Ladibug] icon to launch Ladibug™.
5.2.2. Click , open [Search Window], and select [Wireless Document Camera].
5.2.3. Click , and when completing searching, select one Wireless Document Camera in
the list.
DC-W50 User Manual
5.2.4. Select administrator (Admin) or viewer (Viewer) to log in, administrator shall enter
the password [1234] (default)
5.2.5. Press [Log In] to connect and to start operation.
9
5.3. Use the image sharing server to connect to the computer and camera
Complete image sharing settings for the camera before implementing this method
Equipment requirements
Two computers with Internet access
One camera
5.3.1. Turn on the image sharing function
Connect one of the computers to the camera using a USB cable and turn on the image
sharing function according to the following instructions:
To connect using a USB cable, please refer to 5.1 Use the USB cable to connect the
camera to the computer
Click to switch to the function settings page.
Click [Share Image] to activate image sharing.
[Remark] Take note of the server address for image sharing, manually input the address
on computers with different network segments to connect.
▼Windows interface
▼MAC interface
Turn image sharing on/off
server address for image
sharing
Turn image sharing on/off
server address for image
sharing
10
5.3.2. Connect to the image sharing server
Use the Internet to connect the camera to the image sharing server through the following
steps:
Click , to open [Search Window].
Select [Image Sharing Server].
After automatic search is completed, select camera from the table to connect.
If the camera does not appear on the table, manually input the IP address of the image
sharing server (e.g. 192.168.2.128)
Click to connect
▼Windows interface
Automatic search
table
▼ MAC interface
Manually input
connection address
Automatic search
table
Manually input
connection address
11
6. Operation Interface Description
6.1. Windows interface
6.1.1. Windows Software Screen Introduction - Camera
1. Preview window
2. Page switch
Icon Function Descriptions
Real-time image
Image browser page
Function settings page
Software information page
Switch to Full Screen
/
Disable Ladibug
12
Left function menu
33..
Icon Function Descriptions
Select the connection mode of camera
Turn on/off the Document Camera (does not
support USB models)
Auto focus
Freeze
Capture
Time Lapse
Setting of annotation tool
Eraser (Clear all the objects)
Recover
Redo
Fold the menu
13
Loading...