Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies, nevertheless without any intention
of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.
English - 3
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the visual presenter:
1. Do not place the visual presenter in tilted position.
2. Do not place the visual presenter on an unstable trolley, stand or table.
3. Do not use the visual presenter near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the visual presenter. If you are not sure of
the type of power available, consult your dealer or local electricity company for
advice
6. Place the visual presenter on a place that it can be unplugged easily.
7. Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extensions leads or multi-way plug boards as this may
cause fire or electric shock.
9. Do not place the visual presenter where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
10. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the projector case. They provide ventilation
and prevent the visual presenter from overheating. Do not place the visual presenter
on a sofa, rug or other soft surface or in a built-in installation unless proper ventilation
is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the visual presenter.
13. Except as specifically instructed in this User Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous
voltages and other hazards. Refer all servicing to licensed service personnel.
14. Unplug the visual presenter during thunderstorms or if it is not going to be used for
an extended period, do not place the visual presenter or remote control on top of
heat-emitting equipment or heated objects such as a car and etc.
English - 4
15. Unplug the visual presenter from the wall outlet and refer serving to licensed
Caution: To reduce the risk of electric shock. Do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates that
this equipment may
contain dangerous
voltage which could
cause electric shock.
This symbol indicates that there are
important operating and
maintenance instructions in this
User’s Manual with this unit.
CAUTION
RISK OF ELECTRIC SHOCK
service personnel when the following situations happen:
If the power cable or plug becomes damaged or frayed.
If liquid is spilled into it or the visual presenter has been exposed to rain or
water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow your country’s instructions on how to dispose of used
batteries.
Safety Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This visual presenter has a 3-wire AC line Plug. This is a safety feature to ensure that the
plug will fit into the power outlet. Do not try to disable this safety feature.
If the visual presenter will not be used for a long period of time unplug it from the power
outlet.
FCC Warning
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
English - 5
Note: This equipment has been tested and found to comply with the limits for a Class A or B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) A Unshielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference to the nearby radio and television reception. It is
essential that only the supplied power cords by used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational environment. It
is not intended for residential use.
This is a Class A product. In a domestic environment it may cause radio interference, in
which case the user may be required to take adequate measures. The typical use is in a
conference room, meeting room or auditorium.
English - 6
Chapter 2 Package Contents
DC166
Quick Start Guide
VGA Cable
VESA Base
Installation Guide
Remote Control
Power Cord
Appearance may vary in
different countries
USB Cable
C-Video Cable
Presenter Protector Bag
Microscope Adapter
Accessory Pouch
Padded Carry Bag
(Optional)
Backlight (Optional)
RS-232 Adapter
(Optional)
English - 7
Chapter 3 Product Overview
2. Lamp
5. Remote sensor
1. Gooseneck
4. LED indicator
3. Control panel
6. Lens
7. DIP switch
(Bottom)
English - 8
3.1 Positioning the Presenter and Document
400 mm
3.2 Correct Usage
* About 400mm distance between camera and the desktop is
recommended.
English - 9
Chapter 4 Installation and Connections
PC
PC
Projector
Television
Monitor
SD card
4.1 System Diagram
English - 10
4.2 Mounting the DC166 at Desktop
1. Please set up the DIP Switch Settings first. Refer to Chapter 6 DIP
Switch Settings in the DC166 user manual.
2. Please refer to the Base Installation Guide for installation instructions
for all parts.
4.3 Connecting to a Projector or Monitor
4.4 Connecting to a Computer and Use Lumens Software
Drivers and software can be downloaded from the Lumens website.
English - 11
4.5 Connecting to an Interactive Whiteboard (IWB)
It can be interoperated with major IWB models. The user manual can be
downloaded from Lumens website.
4.6 Connecting to a Projector and TV at the Same Time
Press [SOURCE] button to switch the image source.
English - 12
4.7 Connecting to a Computer with RS232
After connecting to the RS232 cable, you can use RS232 commands.
<Note>: DIP switch settings will not be available until the DC166 is
restarted.
<Note>: In C-Video Mode, some buttons on the machine panel and
remote control are not working.
<Note>: It doesn’t support C-Video and VGA simultaneously. Once
C-Video is on, VGA OUT is not supported.
4.9 Installing application software
After installing the USB driver and application software, you can use the
following functions:
Control the DC166.
Capture and record images.
Annotate the image, highlight important details and save it.
Support the full screen function.
<Note>: Please refer to Ladibug™ software user manual for installation
steps and software operation.
English - 14
Chapter 5 Start Using
1. Place an object to be displayed
under the camera.
2. Turn on Power.
3. Adjust the gooseneck and lens to
the appropriate positions.
4. Press [AUTO TUNE] button
to optimize the image. You are
ready to teach / present.
Each time the camera head is
moved, press the [FOCUS]
button to refocus the lens.
When using the remote control, aim at the receptor on the DC166,
and press the power button.
Once DC211 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
English - 15
Chapter 6 DIP Switch
<Note>: You must restart the DC166 in order for DIP switch
configuration to take effect.
6.2.2 PAL Settings: Countries/regions not listed above
<Note> VGA OUT is not supported once C-VIDEO is enabled.
English - 17
Chapter 7 Introduction to Control Panel/
Name
Function Descriptions
Operation
Turns the visual presenter on and off.
Remote control /
Control panel
,,,
Moves up, down, left or right to select the
needed function.
Remote control /
Control panel
AF
Automatically adjusts the focal length between
the lens and the object being projected.
Either side of
the unit’s lens
AUTO TUNE
Automatically adjusts to the optimal brightness
and focal length.
Remote Control
BRT+/-
Adjusts brightness of the image.
Remote Control
CAPTURE
Capture the image to the SD card (priority) or
internal memory.
Remote control /
Control panel
DELETE
Delete the image stored in the SD card (priority)
or internal memory.
Remote Control
ENTER
Accesses/Activates functions.
Remote control /
Control panel
FREEZE
Freezes the current image temporarily on the
screen. Press again to unfreeze.
Remote Control
MENU
Activates the on-screen menu/exits the menu.
Remote control /
Control panel
BOOK
Switch the view between the upper and
lower half of the image.
Remote Control
PBP
Allows users to compare live images with
captured image files.
Remote Control
PLAYBACK
Plays captured images.
Remote control /
Control panel
ROTATE
Rotates the image by 0°/90°/180°/270°
Remote Control
RECORD
Record motion images. Press [Record] to record
images to SD card (priority) and press [Record]
again to stop recording.
Remote control /
Control panel
SLIDE SHOW
Plays the photos or videos stored on the SD
card (priority) in a slide show.
Remote Control
SOURCE
Switches between different image sources:
1. Live images (default).
2. SD card (priority) or internal memory.
3. PC.
Remote control /
Control panel
ZOOM +/-
Increases or decreases image size.
Remote control /
Control panel
Remote Control Buttons and
On-Screen Menu
7.1 Functions of Control Panel and Remote Control Buttons
<Remark> The functions below are listed alphabetically
English - 18
7.2 On-screen Menu
1st Level
Major
Items
2nd Level
Sub items
3rd Level
Adjustment Values
Function Descriptions
Display
Auto Tune
Enter
Press [ENTER] to automatically
adjust to the optimal brightness
and focal length.
Focus
0~Max
Use the left and right arrow keys
to adjust focal length.
Brightness
0~Max
Use the left and right arrow keys
to adjust brightness.
Mode
Normal/Slide/Film/
Microscope
Use the left and right arrow keys
to select the image mode.
Photo/Text
Photo/Text/Gray
Use the left and right arrow keys
to select the photo/text/gray
mode.
PBP
Enter
Press [ENTER] to immediately
activate the image comparison
mode.
BOOK
ON /OFF
Use the left and right arrow keys
to select Book mode.
Rotate
0°/90°/180°/270°
Use the left and right arrow keys
to rotate the image.
Digital Zoom
ON /OFF
Use the left and right arrow keys
to turn digital zoom on/off
Storage
Slide Show
Enter
Press [ENTER] to play the photos
or videos stored in the internal
memory in slide show mode.
Slide Show
Effect
Off/Shutter/Right/Down/
Side/Open
Use the left and right arrow keys
to select a page-flipping mode.
Delay
1 Sec/3 Sec/5 Sec/10
Sec/ Manual
Use the left and right arrow keys
to select the timing of page flips.
(Select manual mode to switch
images manually.)
Copy To SD
Enter
Press [ENTER] to immediately
copy the data in the visual
presenter to the SD card
<Note> Press [Menu] on the remote control or control panel to enter the
on-screen menu, The bold underlined values in the following table are defaults.
English - 19
Delete All
Yes/No
Use the left and right arrow keys
to select desired image, and then
press [ENTER] to confirm the
deletion of the photo.
Format
Yes/No
Use the left and right arrow keys
to select, and then format the
internal memory.
Auto Erase
ON/OFF
Use the left and right arrow keys
to enable/disable the auto erase
function, which automatically
deletes all stored images upon
system shutdown.
Setting
Capture
Single/Continuous/
Disable
Use the left and right arrow keys
to select the capture image mode.
1. Single: Single-frame mode
2. Continuous: Continuous
shooting
3. Disable: Capture disabled.
When this mode is selected,
you cannot capture nor record.
Capture Time
1hr/2hr/4hr/8hr/24hr
Use the left and right arrow keys
to select the capture image time.
(It only works only when the
Capture mode is set to
[Continuous]).
Capture
Interval
5sec/10sec/30sec/1min/
2min/5min
Use the left and right arrow keys
to select the capture image time
interval.
(It only works only when the
Capture mode is set to
[Continuous]).
USB Transfer
Camera/Storage Device
Use the left and right arrow keys
to select the USB transfer mode.
Lamp
ON /OFF
Use the left and right arrow keys
to turn the lamp on/off.
AE
ON /OFF
Use the left and right arrow keys
to turn the Auto Erase (AE) on/off.
AWB
Enter
Press [ENTER] to activate
Automatic White Balance (AWB)
immediately.
Night Vision
ON /OFF
Use the left and right arrow keys
to select the night vision mode.
English - 20
Advanced
Language
English/繁體中文
/Deutsch/Français/
Español/Русский/
Nederlands/Suomi/
Polski
Use the left and right arrow keys
to select the preferred language.
Projector
Type
DLP/LCD
Use the left and right arrow keys
to turn on/off the noise reduction
function.
Preset Load
Yes/No
Read the value of the current
image mode. Use the left and right
arrow keys to select, and then
confirm by pressing [ENTER].
Preset Save
Yes/No
Store the value of the current
image mode. Use the left and right
arrow keys to select, and then
confirm by pressing [ENTER].
Factory Reset
Yes/No
Use the left and right arrow keys
to select, and then confirm by
pressing [ENTER] to restore
factory defaults.
English - 21
Chapter 8 Descriptions of Major Functions
8.1 Switching Image Sources
Live image is the default image source. Press [SOURCE] on the remote
control or control panel to switch between image sources:
1. Live images (default).
2. PC.
8.2 Making Text Clearer and Photos More Colorful
Photo (Photo mode) is selected by default in the [Photo/Text/Gray] mode
[Photo] (Default): View photos or text with photos in this mode to
enhance colors in photos.
[Text]: View text files in this mode to make text clearer.
[Gray]: View grayscale or black and white photos in this mode.
Change settings with the remote control or control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select [Display].
3. Press [] to select among [Photo/Text/Gray] modes. (Refer to the
description above for the best choice).
4. Press [] or [] to move among [Photo/Text/Gray] modes.
5. Press [MENU] to exit.
8.3 Zoom in /out From an Image
1. Press [ZOOM+] on the remote control or control panel to zoom in to
an image.
2. Press [ZOOM-] on the remote control or control panel to zoom out
from an image.
8.4 Using Auto Focus
1. From the Control Panel, press the [FOCUS] button on the right side of
the lens.
8.5 Adjusting the Brightness
1. From the Remote Control or Control Panel, press [BRT+] to make it
English - 22
brighter.
2. From the Remote Control or Control Panel, press [BRT-] to darken the
image.
8.6 Turning the Lamp on/off
From the remote control or control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select [Setting].
3. Press [] to select [Lamp] modes.
4. Press [] or [] to turn [ON]/[OFF].
5. Press [MENU] to exit.
8.7 Automatically Adjusting the Image to Optimal
Brightness and Focal Length
From the remote control:
1. Press [AUTO TUNE] for the optimal brightness and focal length.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select [Display].
3. Press [] to select among [Auto Tune] modes.
4. Press [ENTER].
5. Press [MENU] to exit.
8.8 Freezing Images
1. Press [FREEZE] on the remote control to freeze the current image on
the screen. Press again to unfreeze.
8.9 Capturing Images
8.9.1 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter
the on-screen menu.
2. Press [] or [] to access the [Setting] menu.
3. Press [] to enable [Capture].
4. Press [] or [] to select [Continuous].
English - 23
5. Press [] to find [Capture Time]; Press [] or [] to select time
settings.
6. Press [] to find [Capture Interval]; Press [] or [] to select time
settings.
7. Press [MENU] to exit.
8.9.2 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel to
capture and save images.
<Remark> You cannot capture images when the [Capture] mode
is set to [Disable]. If it is set to [Continuous], you can capture
images continuously. Press [CAPTURE] to start capturing
continuously, or press [CAPTURE] again to exit.
8.10 Browsing Captured Images
1. Press [PLAYBACK] on the remote control or control panel to display
thumbnails of all captured images.
2. Press [] or [] or [] or [] to select the thumbnail you want you
browse.
3. Press [ENTER] to access the full-screen display of the image.
4. Press [] or [] to browse the through saved images.
5. Press [PLAYBACK] to exit.
6. Press [MENU] to exit.
8.11 Deleting Captured Images
From the remote control:
1. Press [PLAYBACK].
2. Press [] or [] or [] or [] to select the desired thumbnail for deletion.
3. Press [DELETE] to delete the selected file.
4. Press [MENU] to exit.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select [Storage].
3. Press [] to select [Delete All].
4. Press [] or [] to select [Yes].
English - 24
5. Press [ENTER] to confirm selection.
6. Press [MENU] to exit.
8.12 Automatically Deleting Captured Images When the
Device is Turned off (Auto Erase)
From the remote control or control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] or [] to enable [Auto Erase].
4. Press [] or [] to select among [ON] modes.
5. Press [MENU] to exit.
8.13 I would like to Record Videos
8.13.1. Recording videos
1. Press [RECORD] on the remote control to start recording videos.
2. Press [RECORD] again to stop recording.
<Note> You cannot record videos when the [Capture] mode is set
to [Disable]
8.13.2. Playing videos
1. Press [PLAYBACK] on the remote control or control panel to
display thumbnails of all videos recorded.
<Note> Only MOV files recorded can be played
2. Press [] or [] or [] or [] to select the thumbnail you want you
browse.
3. Press [ENTER] for full-screen play.
4. Press [] or [] to turn to the previous/next video.
5. Press [PLAYBACK] to exit.
English - 25
8.14 I would like to switch the view between the upper and
lower half of the image (BOOK)
1. Press [BOOK] on the remote control and the upper half of the live
image will be displayed .
2. When you press [BOOK] again, the lower half of the live image will be
displayed.
3. Press [BOOK] again to exit this function and return to the live image
8.15 Playing a Slides (Slide Show)
8.15.1 Using the slide show effect:
1. Press [MENU] on the remote control or control panel to enter the
on-screen menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [ ] to enable [Slide Show Effect].
4. Press [] or [] to select page-flipping mode among [Off / Shutter / Right
/ Down / Side / Open].
5. Press [MENU] to exit.
8.15.2 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
on-screen menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [] to enable [Delay].
4. Press [] or [] to select page-flipping interval [1 Sec/3 Sec/5 Sec/10
Sec/Manual].
5. Press [MENU] to exit.
English - 26
8.15.3 Start/Pause/Stop Playing Images
Stored image
Live image
C1
C3
C2
C4
C5
C6
C7
<Note> Images over 8MB cannot be played. During playback, the
[ROTATE] function can be activated to rotate the images.
From the remote control:
1. Press [SLIDE SHOW] to start playback.
2. Press [ENTER] to pause playback.
3. Press [ENTER] again to continue playback.
4. Press [SLIDE SHOW] again to stop playback.
From the control panel:
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [] to enable [Slide Show].
4. Press [ENTER] to play back images.
5. Press [ENTER] to pause playback.
6. Press [ENTER] again to continue playback.
7. To stop playing, repeat Steps 1 to 4.
8.16 Comparing Live Images with Stored Images (PBP)
This function allows you to simultaneously display a live image on the right
side and a storage image on the left side for comparison.
From the remote control:
1. Press [PBP] to enter the photo selection screen.
2. Press [] or [] or [] or [] to select the file to be compared.
3. Press [ENTER] to activate image comparison.
4. Press [ENTER] to switch between the stored image and the live image.
English - 27
5. Press [] or [] to move the selected image left or right.
6. Press [ZOOM+/-] to zoom in/out from the live image
7. Press [PBP] to return to the stored image screen.
8. Press [MENU] to exit.
From the control panel
1. Press [MENU] to enter the on-screen menu.
2. Press [] or [] to select the [Display] menu.
3. Press [] to select [PBP].
4. Press [PBP] to enter the photo selection screen.
5. Press [] or [] or [] or [] to select the desired file for comparison.
6. Press [ENTER] to activate image comparison.
7. Press [] or [] to move through selected images.
8. Press [ZOOM+/-] to zoom in/out from the live image
9. Press [PBP] to return to the stored image screen.
1. Press [MENU] on the remote control or control panel to enter the
on-screen menu.
2. Press [] or [] to select the [Advanced] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [ENTER] to activate.
8.18 Computer- Related Functions
Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to Chapter 4 Installation and
Connections in this user manual.
English - 28
8.18.1 Inserting a Photo in the MS-Paint Application
1. Click [File > From Scanner or Camera] in the MS-Paint application as
shown in the bottom left figure.
2. Click on [Get Picture] to finish, as shown in the top right figure.
8.18.2 Inserting a Photo in a Microsoft Word Document
1. Click [Insert / Image / From Scanner or Camera] in the Microsoft Word
application.
2. Select [Visual Presenter V2] and click [Custom Insert].
English - 29
3. Click [Get Picture] to finish.
8.18.3 Changing the Setting of the DC166 and then Capturing a
Photo in Microsoft Word
1. Click [Insert /Image /From Scanner or Camera] in Microsoft Word.
2. Select [Visual Presenter V2 TWAIN] and click [Custom Insert].
English - 30
3. A window displaying a live image (see below) will appear.
4. Press [Setting]: When the Camera Settings window pops up, the live
image can be adjusted. The operation is identical from both the remote
control and the control panel. Refer to Chapter 7 Control
Panel/Remote Control Buttons and On-screen Menu for more
information.
5. Press [Capture] to capture images in Microsoft Word.
6. Press [Cancel] to exit.
8.18.4 Setting up the DC166 as a Webcam for Skype
The DC166 can be used as a webcam for instant message (IM) software
such as Skype and MSN. Operation with any IM program is similar. In
Skype, for example, complete the following steps:
1. Open the Skype application and choose [Tools] > [Options].
2. Select [Video Settings], check [Start my video automatically when I am in
a call] and select [Visual Presenter V2] as the desired webcam, as
shown below.
English - 31
Call your desired contact. When both parties are connected, Skype will
display the video screen.
English - 32
8.18.5 Setting up the DC166 as a PC Camera
1. Open My Computer and click on [Visual Presenter V2] to display a live
image.
8.18.6 Connecting to an Interactive Whiteboard
To connect to an Interactive Whiteboard, go to the LumensTM website and
download the reference guide for your desired brand.
(http://www.lumens.com.tw/goto.htm)
English - 33
Chapter 9 Connecting to a Microscope
For eyepieces of about Ø 33mm
and Ø 34mm, only one
microscope adapter is needed
(please choose the one with
maximum diameter).
For eyepieces of about Ø 28mm or
Ø 31mm, please choose the
microscope adapter with maximum
diameter along with another
appropriate microscope adapter.
1 Mount the microscope adaptor in the accessories pack onto the microscope
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø 28mm, Ø 31mm,
Ø 33mm, and Ø 34mm.
2 Connect the lens of the DC166 with the microscope adaptor.
3 Select the Microscope mode
3.1. From the control panel or remote control
3.1.1. Press [MENU] to enter the on-screen menu.
3.1.2. Press [] or [] to select [Display].
3.1.3. Press [] to select among [Mode] modes.
3.1.4. Press [] or [] to select [Microscope].
4 If the image is fuzzy:
4.1. Adjust the focus of microscope.
4.2. Press the [FOCUS] button on either side of the DC166 lens to activate
the auto focus.
English - 34
Chapter 10 Troubleshooting
No.
Problems
Solutions
1
No power signal
Check that the power cord is securely connected to
the wall socket and the unit.
2
No image output
from the DC166
1. Check the power outlet.
2. Check the connection. Refer to Chapter 4
Installation and Connections in this manual.
3. Check the signal sources [SOURCE]. Refer to 8.1
Switching image sources in Chapter 8
Descriptions of major functions in this manual.
4. Check the settings for the projector source. Refer
to the projector’s user manual.
5. Check if DIP Switch is properly set. Refer to
Chapter 6 DIP Switchfor related settings.
3
Unable to focus
Probably the document is too close to the lens. Press
[ZOOM -] on the remote control or control panel.
Or increase the distance between the lens and the
document, and then press the [FOCUS] button on
the right side of the lens.
4
Cannot see the
entire image
Check Auto Image of the projector. Refer to the
projector’s user manual.
5
Visual Presenter
V2, Ladibug ™ and
other applications
cannot be used
simultaneously
Visual Presenter V2, Ladibug ™ and other
applications cannot be used simultaneously. Please
close the currently running applications and then
execute the desired application.
This chapter outlines possible solutions to common problems. For other issues,
contact your dealer or service center.
English - 35
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.