Lumens CT-I30 User Manual
CT-I30 Installation Guide
www.MyLumens.com
Important
＊
Please activate your warranty at www.MyLumens.com/reg
＊
To download the latest version of Quick Start Guide, multilingual
user manual, software, or driver, etc., please visit Lumens
http://www.Mylumens.com/support.php
＊
To ensure successful installation, please be sure to follow each
of the following steps.
1. Accessories
x1 x1 x1 x1 x2x2
Body Tool Tool
Cable
Management RubberBase
2. Arms Installation
EVA
x1
x1
3. Pad Installation
Caution: Claws can only be adjusted in “unlock” position do not try to adjust the claws in “lock” position.
Use key to unlock the security lock Unlock the claw lock
TM
Pull out each fixed claw to extend position
Key
Place pad product
Remove the
waterproof cover
then put the rubber
＊When the base and arm joints are loose, use the long side of tool to lock arm.
Put hand screw
through the
horizonital
metal plate
Assembled the
grommet set
between both sides
of the table hole
Acomplished
Use the tool
to lock arm
Push the claws toward PAD to be fixed and locked
by switch, then press the knob in the security
lock position
Additional EVA cushion available
in the package for thinner devices
Paste EVA cushion to the
indicated position on the holder
4. Charging
6. Features
5. Cable Route
Use cable management
to manage the cable
when charging or
synchronizing .
7. Tension Adjustment
All products are adjusted to the most suitable tension
before leaving the factory,do alter unless necessary.
Screws/hinges during usage will loose, use the tool kit
included to tighten them.
Loading...