Lumens 60W, 40W, 120W, 150W, 180W Instruction Manual
...
3.
22
AC
20
DIMMABLE
Wat erproof C onnector sh ould be tig htened when y ou connect in put wire.
4.
Wire diameter:
7- 12 mm
-
+
-
+
INPUT
(L, N, )
5.
SPD (L, N , )
HEAT SIN K( )
DRIVER(L, N , )
Wire diameter:
5- 10 mm
DRIVE R
(DIM+ ,
DIM-)
PCB
(DC+,
DC-)
-
-
+
+
INPUT
(DIM+ ,
DIM-)
DRIVE R
(DC+,
DC-)
Troubleshooting
?
Problem
LEDs stop working
LEDs flash on and off
The power line is improperly connected.
The power plug is loose.
The LED driver malfunctions.
The LED chip is damaged.
The output of the driver is abnormal.
The LED chip breaks down.
Possible Cause Solutions
Reconnect the power cable.
Firmly plug the power in.
Replace with new driver.
Replace with new LEDs.
Replace with new driver.
Replace with new LED chip.
Warranty
5 years warranty for original purchaser of LED product that is identified on seller's invoice
reflecting its original purchase (the "Product").
1. In order to ma ke a w ar ra nty claim, you mu st n ot ify seller in wri ti ng w it hin sixty(6 0) d ay s af ter your
discovery o f th e de fe ct, provide pro of o f pu rchase such as th e in vo ic e and comply wi th s el le r's other
warranty re qu ir em ents. Upon rece iv in g that notice, to a sc er ta in why fixtur es s to p wo rking, eviden ce s
would be needed f or s el ler's QC Team t o an al yze. Seller may r eq ui re you to promptl y re tu rn t he Product
to Seller whe n ne ce ss ary, fre ig ht p re paid.
2. The determi na ti on o f whether the Pro du ct i s defective sha ll b e ma de b y Seller in its s ol e di sc retion with
considera ti on g iv en to the over all pe rf or mance of the Prod uc t.
3. If seller de te rm in es the Product is d ef ec tive, Seller wi ll e le ct , in its sole dis cr et io n, repair the Pro du ct
or replace th e Pr od uc t. Seller reser ve s th e right to utiliz e ne w, re co nditioned, re fu rb ished, repair ed o r
remanufac tu re d pr oducts or parts i n th e wa rranty repair o r re pl ac ement proce ss . Su ch p roducts and
parts will be c om pa ra ble in function a nd p er formance to an or ig in al p roduct or part, a s de te rmined by
Seller in its s ol e di sc retion, and war ra nt ed for the remain de r of t he o riginal warra nt y pe riod. However,
cost of labor a nd e qu ip ment to remove th e de fe ctive product a nd i ns ta ll a repaired o r a re pl ac ement
Product at th e en d- us er facility are e xc lu ded. Supplier 's a gg re gate liabilit y wi th r espect to a defec ti ve
product sha ll i n an y ev ent be limited to t he m on ey paid to buyer fo r th at d ef ective prod uc t.
The following circumstances will not be warranted:
1. Damage cau se d by f or ce majeure such a s wa r, ri ots, sabotage , cy cl on es, earthqu ak es , ti dal waves,
flooding, lig ht in g strikes, expl os io ns, fire, flood , et c.
2. Damage cau se d by u se r's improper de li ve ry, defect s ca us ed by wrong opera ti on , wr ong treatme nt
and destruc ti on o f ma chinery.
3. Dismantl in g or m od ification or im pr op er maintenanc e or r ep ai ring of the produ ct s wi thout the
supplier's au th or ization.
4. Damage cau se d by b uy er or installer u si ng b ad quality cabl e or o th er m ismatching el ec tr onic parts.
5. This w ar ra nt y is invalid if t he p ro du ct is not used for th e pu rp ose for which is or ig in al ly designed . Any
disputes oc cu rr ed s hall be applied t o th e la ws and regulati on s of P.R.C.
LED Flood Light
Instruction Manual
The seller has the sole right to interpret and amend the above articles.
40W/60W/80W/100W/120W/150W/180W/200W/240W
Version: 0 1
Reminder
We appreciate your purchase!
Please read the instruction manual before installation and keep it for future reference.
Warning
1. To avoid damage, falling, electric shock or fire, please do not modify the lamp or replace accessories without
confirming with the supplier first.
2. Please authorize only qualified personnel to install the lamp and ensure they follow the instructionmanual.
Any improper installation might cause falling, electric shock, fire, or other injury, damage or hazard.
3. Please disconnect power before installation or any maintenance of the lamp.
4. Please disconnect power if it begins to smoke or emit odors, since fire or electric shock may occur. Ask
qualified person to inspect and maintain the luminaire.
5. Please do not dismantle the lamp without the supplier’s authorization.
6. Please do not touch the power supply when the lamp is operating.
7. If the external flexible cable or cord of the luminaire is damaged, it should only be replaced by the supplier,
a service agent or qualified person.
8. Terminal block not included. Instal lation may require advice from a qualified person.
9. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent
or a similar qualified person.
10. Only to be installed outside arms reach.
11. For use in environments where an accumulation of non-conductive dust on the luminaire may be expected.
12.Mounting heights of light s not higher than 20m.
Caution risk of electric shock
Application
With aluminum heat sink, high-brightness SMD chip, high-effciency constant current and voltage power
driver, LED Flood light is designed for applications in large industrial areas like airports, big docks,
squares, stadiums, etc.
Technical Parameters
Product Specifications
40W
60W
80W
100W
120W
180W150W
200W
240W
Installation Instructions
Physical Dimensions
11mm(0.43")
25mm(0.98")
11mm(0.43")
40mm(1.57")
135mm(5.31")
55mm
(2.17")
160mm(6.3")
60mm
(2.36")
∅11mm(0.43")
∅11mm(0.43")
359mm(14.13")
40mm(1.57") 276mm(10.87")
82mm
(3.23")
413mm(16.26")
42mm(1.65")
83mm
(3.27")
265mm(10.43")
308mm(12.13")
40W/ 60W/80W
325mm(12.8")
334mm(13.15")
366mm(14.41")
100W /120W/150 W
418mm(16.46")
Bracket mounting (With input line)
GND
L
N
brown
blue
yellow/green
black
white
green
Bracket mounting (Without input line)
1.
The buckle should be opened
by flat blade screwdriver.
2.
DIM+
DIM-
90
blue
white
o
Dimmable
brown
blue
purple white
gray black
90
o
Input Voltage
Power Frequency
Outlook Dimensions
Luminaire Net Weight
(±0.3kg / ±0.66Lbs)
Working Temperature
Storing Temperature
359×308×82mm
(14.13"×12.13"×3.23")
4.3kg
(9.48Lbs)
4.5kg
(9.92Lbs)
AC100-240V / AC100-277V / AC200-240V / AC277-480V
50 / 60Hz
462×452×87mm
(18.19"×17.8"×3.43")
8.4kg
(18.52Lbs)
4.6kg
(10.14Lbs)
413×366×83mm
(16.26"×14.41"×3.27")
6.3kg
(13.89Lbs)
o o o o
-30 C to +45 C (-22 F to +113 F)
o o o o
-40 C to +70 C (-40 F to +158 F)
6.5kg
(14.33Lbs)
6.8kg
(14.99Lbs)
8.6kg
(18.96Lbs)
8.9kg
(19.62Lbs)
11mm(0.43")
40mm(1.57")
240mm(9.45")
100mm
(3.94")
∅11mm(0.43")
87mm
(3.43")
452mm(17.8")
45mm(1.77")
430mm(16.93")
462mm(18.19")
180W /200W/240 W
o o
120 ±5
The cover tempered glass should be
paid attention to avoid collision with
ground when we open the buckle.
Loading...