Lumberjack TTA-MULTI User Manual

USER MANUAL

Industrial Series (60° Shoulder Profile)

Multi-Tool

MODEL:
Industrial Series TTA-MULTI

Lumberjack Tools Inc.
PO Box 730
Chippewa Falls, WI 54729
www.lumberjacktools.com
Email: [e-mail]
Phone: [phone]

Rev: 1/17

2

About Your Product

Thank you for purchasing our Dual Blade – Industrial Series Tenon Cutter!
Lumberjack engineers, along with our craftsmen, have designed the

safest, easiest-to-use tenon cutters on the market. By combining old world
skills with 3D CAD modeling and CNC manufacturing, we have created the
ideal tenon cutter: straight tenons, smooth finish, precision operation, and
long life.

Our Multi-Tool is a revolution in tenon-cutter design, allowing the user to
cut six different tenon sizes with a single tool. The tool body is precision
CNC machined out of a solid billet of aircraft-grade aluminum to ensure du­rability and long-life. Two heat-treated blades, versus the traditional single
blade, distribute the cutting force evenly across razor-sharp, precision
ground edges. Beveled aluminum quick-release inserts keep the tenon
straight, and are quickly and easily changed.

Our lifetime guarantee covers the tool body, aluminum inserts, and shank.
The blades are covered for 90 days from the date of purchase for
breakage under normal working conditions. Blades will dull faster cutting
hardwoods vs. softwoods (peeled or unpeeled). Soil and other abrasive
substances will reduce blade life, and contact with these substances is not
covered under this warranty. When making a claim, you must show proof
of purchase from an authorized distributor. This warranty is valid only to
the original buyer, and not valid for tools sold secondhand, used, or sold
“as-is”

What Voids Warranty

In order to keep our lifetime and 90 day warranty you must AVOID the
following actions:

● Operating the tool in a drill press or lathe (or any system other than
a hand-held drill)

● Running the tool into a nail or foreign object

● Altering or misusing the tool

3

SAFETY

Before beginning any project, carefully read and follow ALL safety and

operational instructions for any tools or devices you will be using. Failure to do

so may cause physical harm to yourself or those around you. If you feel

uncomfortable using our tenon cutters or any other tool, STOP immediately.

Lumberjack Tools assumes no responsibility for injury caused to the operator,

bystander, or tools used in conjunction with the use or misuse of our tenon

cutters.

NEVER OPERATE POWER TOOLS UNDER THE INFLUENCE OF
DRUGS, ALCOHOL, OR ANY MEDICATIONS

ALWAYS WEAR SAFETY GLASSES, DUST MASK, AND ANY OTHER
PERSONAL PROTECTION ITEMS AS NEEDED

NEVER WEAR LOOSE ITEMS THAT COULD BE CAUGHT IN MOVING
PARTS. SECURE LOOSE OR LONG HAIR AWAY FROM AREA

WE STRONGLY RECOMMEND A SINGLE-SPEED, GEAR DRIVEN
DRILL WITH RPMS OF 500 OR LESS. EXCEEDING THESE RPMS MAY
RESULT IN DAMAGE TO THE TOOL

ALWAYS DISCONNECT POWER AND ALLOW DRILL TO COME TO A
COMPLETE STOP BEFORE INSTALLING, REMOVING, OR ADJUSTING
THE TOOL

NEVER APPLY BENDING FORCE (SIDE LOADING) THE TOOL. SIDE
LOADING COULD CAUSE THE SHANK TO FAIL, OR MAY RESULT IN
BLADE DAMAGE

ALWAYS SECURE THE LOG IN A VISE OR CLAMP PRIOR TO
STARTING YOUR DRILL. FAILURE TO DO SO MAY RESULT IN INJURY

ALWAYS HANDLE THE BLADES WITH EXTREME CARE! FAILURE TO
DO SO MAY RESULT IN SERIOUS INJURY

WHEN EXCESSIVE FORCE IS REQUIRED TO CUT, RE-SHARPEN OR
REPLACE THE BLADES. A SHARP TOOL IS A SAFE TOOL!

NEVER PUT HANDS OR ANY BODY PART INSIDE THE TOOL WHILE THE
BLADES ARE ATTACHED! DOING SO MAY CAUSE SERIOUS INJURY

Ø3/4” Spacer (Qty. 1)* Ø1” Spacer (Qty. 1)*

Ø1-⁄” Spacer (Qty. 1)*

Ø1-⁄” Spacer (Qty. 1)*

Ø1-⁄” Spacer (Qty. 1)*

Plan Booklet (Qty. 1)

Quick Stop Pin

(Qty. 3)

Hex Wrench

(Qty. 1)

TB2500

Blades (Qty. 2)

Tenon Cutter (Qty. 1)

4

What’s Included

www.lumberjacktools.com

1. DRILL 2. CUT 3. ASSEMBLE

20 Log Furniture Plans

*Some spacers not included with certain models

Button Head Cap

Screw (Qty. 4)

Thumb

Screw

(Qty. 2)