Lumantek ez-DSK UB4 Quick Manual

UB4
Quick Manual

Live CG Generator, ez-DSK UB4

Features

1. Fail Safe 2. Zero Delay 3. Re-clocking 4. Distributor and Converter

Introduction

ez-DSK is a computer graphics (CG) generator which can add user created CG’s to the
outgoing broadcast video with ease. CG’s include images, videos, sequences, texts, and
widgets, and these are overlaid to your outgoing video allowing not to waste extra video
ports.

ez-DSK has ‘Zero Delay’ transmission with ‘Fail Safe’ mechanism. In case that the device is
not working properly, CG insertion may stop, but original video will still be broadcasted.
ez-DSK comes with 1 SDI (loop) output, 4 SDI and 1 HDMI output ports, so it is a distributor
and a SDI-HDMI converter as well. All outgoing ports re-clock the videos for further reach
for better quality video broadcasting.

1. Power : Green light lit when power is inserted.

2. Alarm : Signals trouble. Blinks red light when USB3.0 is not connected or when
incoming video resolution does not match to ez-DSK resolution.

3. Lock : Green light lit when incoming video is detected.

4. USB : Green light lit when USB3.0 is connected with a computer.

System Information

[ Front ]

[ Rear ]

1

ez-DSK

1. Power switch : DC power on/off switch

2. DC power : DC power insert port (DC+7V to +18V)

3. SDI in : Incoming video port

4. Loop out : Outgoing video port (clean output)

5. SDI out : Outgoing CG video port Fail Safe

6. SDI out : Outgoing CG video port

7. HDMI out : Outgoing CG video port

8. USB3.0 : CG insert port

3

2

4 5

7

6

8

TV / Monitor

Video Switcher SDI Monitors

PC

Connection Map