Lumantek EZ-CASTER-EN3 Users Manual

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

Manual

ez-Caster EN3 (Encoder/ATSC Modulator)

MPEG2/H.264 HD Encoder (for IP/ATSC/8VSB)

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

EN3 - Encoder + Modulator Manual

Revision Number: 1.0.1
Distribution Date: August. 2016

Copy Rights
Copyright © 2016 LUMANTEK Co., Ltd.
All Rights Reserved

This document contains information that is proprietary to LUMANTEK.CO., LTD. The information in this
document is believed to be accurate and reliable; however, LUMANTEK assumes no responsibility or
liability for any errors or inaccuracies that may appear in this document, nor for any infringements of
patents or other rights to third parties resulting from its use.

This publication may contain technical issues, inaccurate information or typos. These will be revised in
revised edition, if there is any. No part of this publication is subject to be reproduced, stored in retrieval
system, or transmitted in any forms, or any means without the prior consent by Lumantek.

Trademarks

HD ENCODULATOR

TM

DTA-Plus

, Media BlasterTM, are Trademarks of Lumantek. Co., Ltd.

Any other trademarks than stated above in this document belongs to its pertinent corporation.

Warranty Period
Lumantek’s products comes with One(1) year limited warranty. Please contact below if you need more
information.

LUMANTEK CUSTOMER SERVICES

[e-mail] / TEL:[phone] / FAX:[phone]

TM

, SD ENCODULATOR

TM

LUMANTEK Logo, Mega CruiserTM, ORIXTM, X-CruiserTM,

2

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

Contents

1. Introduction -----------------------------------------------

2. Specifications ---------------------------------------------

3. Product Description -------------------------------------

3.1. Product Parts Name

3.2. Components

3.3. Installation Precaution

4. Product Operation ---------------------------------------

4.1. Status LED

4.2. Front Control Panel

4.2.1. Category Structure Summary

4.2.2. Setting category Summary

4.2.3. Location and Operation Description

Appendix A. PC GUI Control S/W -------------------------

Appendix B. Frequency Table ---------------------------

4

5

6

6

6

7

8

8

9

10

11

12

19

23

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

EN3 - Encoder + Modulator

MPEG2/H.264 HD Encoder (for IP/ATSC/8VSB)

1. Introduction

The ‘ez-Liveshow’ is a new Audio/Video system brand with AV encoding and multiplexing technology

from Lumantek designed for small studio applications. EN3 is one of the ‘ez-Liveshow’ series enabling

a simultaneous video/audio encoding technology and modulation in a single device once. Optimized

for Korean terrestrial TV environment, supporting Mpeg-2 Video and AC3 Audio technology as well as

the 8VSB modulation. System supports HDMI, HD-SDI, Component and Composite inputs with HDMI,

HD-SDI, Analog Stereo Audio(L/R) for audio inputs.

4

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

2. System Specifications

Type

Inputs

Video Resolutions

TS Mux &

System

Video Encoder

Audio Encoder

PSIP Generator

ASI Output

RF Output

IP Output
(*Option)

Management

Physical

HD Encoder + 8VSB Modulator

SD/HD-SDI, BNC 75Ω 1ea

HDMI 1.4a 1ea (HDCP not supported)

Component, YCbCr, 170MHz 12bit ADC, RCA 3ea

Composite, CVBS, 3D Comb Filter, RCA 1ea

Analog Stereo Audio (Left/Right), RCA 2ea

1920x1080 @ 60p, 59.94p Automatic Convert to interlaced format
1920x1080 @ 60i, 59.94i

1280x720 @ 60p, 59.94p

720x480 @ 59.94i (NTSC)

Resolution detect and automatic/manual change support
System Delay: 150ms, 200ms, 350ms,650ms

TS Bit-rate: 4.5~25 Mbps

Editable TS ID, PMT/PCR/Video/Audio PID

MPEG2, H.264
MPEG2 HD/SD (MP@HL/MP@ML), H.264 HD/SD (HP@L4/HP@L3)

Bit Rate: (MPEG2) 5Mbps ~ 22 Mbps, (H.264) 3.5Mbps ~ 22Mbps

Closed Caption Support

MP1L2, Dolby AC3, AAC-LC, HE-AACv2 (Stereo)

Bit-rate: 192~384 Kbps (HE-AACv2는 32~96Kbps)

Sample Rate: 48KHz

Audio Delay: 0~400ms

Volume Control: 100%~500%

MGT, TVCT Generation Enable/Disable

Short name, major and minor channel number setting
Connector: BNC 75Ω 1ea

Packet Size: 188 Bytes

TS Bit Rate: 19.392Mbps

Modulation: ATSC(8VSB)

Connector: F-Type 75Ω 1ea

Output Level : +2~-18dBm (0.5dB Step)

Center Frequency Range: 40~999 MHz

MER: >36dB
Spurious: 60dBc (Relative to Output Level)

Phase Noise: VHF 110dBc@20kHz, UHF 95dBc@20kHz
Ethernet : 10/100Bast-T, half/full duplex

Maximum Transmission Unit : 1464~1472 MTU

Streaming Protocol : MPEG2-TS/UDP

Transport Protocol : UDP, Unicast or Multicast

IGMPv1, IGMPv2 support
Front Panel: 4-line text LCD, 6 buttons, Status LED(RGB)

Rear USB Port: GUI, Firmware Update
Dimension: 44(H) X 483(W) X 240(D) (excluding connectors)
Operation Temperature: 0~45℃
Weight: 2 Kg
Power Consumption: 25W(max.)

5

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

3. Product Description

3.1. Product Part Name

< EN3 Main frame – Front>

Status

LED

LCD

<EN3 main frame – Rear>

Power

IP Output
(*option)

Composite input

Component input

Audio L,R input

3.2. Components

This system package includes:

① EN3 Main Frame

② AC Power Cord :110V AC or 220V AC input Power Cord

Arrow

Keys

HDMI input

SD/HD-SDI input

Setting and

cancel button

ASI output

Power

RF output

USB Serial(RS-232)

GUI connection

EN3 Main frame

6

AC power cord

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

3.3. Installation Precautions

This page states the safety measures the users must take to avoid circumstances where the system may
occur physical damages or injuries. Please THOROUGHLY go over this page before the system
installation/operation.

General Precautions

- Maintain dust FREE condition during and after System Installation/Operation.

- Please place the system cover in a safe location when opened.

- Securely stow tools and cables away from the passages.

- Avoid wearing loosened clothes or accessories during installation/Operation.

- Avoid any unnecessary actions that may damage/harm system or personnel.

- Do NOT open the system unless advised by Lumantek representative. Lumantek takes no responsibility on
units with broken RMA seals.

Power Precautions

- Please check cable overload before connecting the system to the power supply.

- Avoid wearing metal accessories (Rings, Earrings) connecting system to the power source.

-

Avoid operating on wet floors. Make sure power extension cables, floors, and instruments are grounded
and in a safe operating condition.

- Please discharge static electricity by touching grounding metals before starting hardware installation.

- The grounding parts must be disassembled last.

- Manufacture takes no responsibilities on Direct/Indirect losses or damages due to use of inappropriate
parts or services by unauthorized service provider

- Supplying power during the system installation may cause damages to the system and personnel.

AC Power Precautions

- This unit utilizes AC power, the cord comes with a grounding function.

- Please connect the system to the power socket with groundings.

- Use Green/Yellow 0.75mm2 (18AWG) or higher grade grounding cables.

- Do NOT block power sockets with tools or boxes. Please keep it clear at all times.

7

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

4. Product Operation

4.1. Status LED

Status LED- blue, geen and red, total of three colors available.
Each color indicates the following status.

• System Booting

• Applying setting value

• Changing resolution

• Normal operation (Data input detected)

• No input

• Resolution not supported

• Internal operation error

8

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

4.2. Front Control Panel

Control and configure system settings with LCD screen, Arrow, settings and ESC keys at Front Control
Panel

** Move cursors / Change settings

Settings value (Number)

Increase settings value (Number)

Setting value (Number)

Decrease setting value(Number)

Confirm current setting

Exit menu

9

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

4.2.1. Category Structure Summary

동작 상태

Main Menu

메인 메뉴

Press ‘Set’ to move

Set 버튼 이동

(Press ‘ESC’ to move opposite

(ESC 버튼으로

direction

반대방향 이동)

서브 메뉴

Sub- menu Operation Status

category settings

항목 별 설정

10

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

동작 상태

Operation Status

Main Menu

메인 메뉴

서브 메뉴

Sub- menu

(*option)

항목 별 설정

category settings

11

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

4.2.2. Setting Category Summary

Sub Menu
Location

INPUT

ENC

Setting Categories Value, range Features

CVBS
COMPONENT

VIDEO IN

AUDIO IN

RESOLUTION

PATTERN

SYS DELAY 150,200,350,650 (ms) Encoder delay Configuration

TS ID

HDMI
SDI
SDIcc

RCA
HDMI
SDI

AUTO
1080p
1080i
720p
480i

BLACK
WHITE
BLUE

1 ~ 65534 TS ID Settings

Select video input port
(*when selected, the audio input port
is automatically changed to
appropriate input port.)
(*SDIcc is SDI input mode supporting
closed caption)

Select audio input port

Choose either Automatically
detecting the input resolution, or
allowing specific resolutions only.

Select a color pattern displayed when
no input signal detected.

PSIP

MODULAT
OR

AUDIO DELAY 0 ~ 400 (ms) Audio Delay Settings

PSIP OUT

MAJOR CH 1 ~ 99 Major channel Settings

MINOR CH

NET NAME Maximum 7 letters Channel name Settings

SET FREQ

SET FREQ BY KOR-T

SET FREQ BY KOR-C

POWER

ENABLE, DISABLE PSIP output On/Off

1 ~ 999 Minor channel Settings

40.0 ~ 999.0 MHz Output frequency Settings

- Frequency input

2 ~ 69 Output frequency Settings

- Terrestrial channel number input

2~158 Output frequency Settings

- Cable channel number input

-18.0 ~ +2.0 (dBm) Output power Settings

12

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

Sub Menu
Location

IP-OUT

(*option)

Setting Categories Value, range Features

OUT

DSI IP ADDRESS

DST UDP PORT

HOST IP ADDRESS

HOST SUBNET

Enable
Disable

XXX.XXX.XXX.XXX Output destination IP address

1 ~ 65535 Output destination UDP port

XXX.XXX.XXX.XXX Select Host IP Address

XXX.XXX.XXX.XXX Select Host Subnet Mask

IP Output Enable/Disable

setting

number setting

MASK

HOST GATEWAY

HOST MAC ADDR

ERR#

XXX.XXX.XXX.XXX Select Host Gateway Address

XX-XX-XX-XX-XX-XX Check the MAC Address of the

equipment
(Modification is not possible)

CLEAR
CANCEL

When ‘CLEAR’ is selected, Output
error counter for monitoring will
be initialized.

System

LOAD DEFAULT

REBOOT

YES
NO

YES
NO

Reset ‘Setting values’

Reset

13

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

4.2.3. Location and Operation Description

1) Operation Status

I:HDMI V:1V00C
R:1080I60 C:04-001
F:04CH_KT 069MHz
P:+00.0dBm T:045`C

Setting

location

operatio
n status

,
,

,
,

◀,▶ ▲,▼ SET ESC Features

n/a n/a Move to

main
menu

Left: Input port
Right: Version

Left : Input resolution
Right : Virtual channel number

Output frequency setting status

Left: Output power(dBm)
Right : Internal system temperature

n/a Display settings and input

status

14

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

2) Main Menu

>> MAIN MENU <<
>INPUT
ENCODER
PSIP
MODULATOR
IP-OUT (*Option)
SYSTEM

IP-OUT
Sub menu

(*option)

INPUT
Sub menu

ENCODER
Sub menu

PSIP
Sub menu

MODULATOR
Sub menu

Setting

location

Main

menu

SYSTEM
Sub menu

◀,▶ ▲,▼ SET ESC Features

n/a Move to

category

Move to
the sub
menu of
the
selected
category

15

Move to
the
operatio
n status

When you select sub menu
from the category, it
moves to appropriate sub
menu

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

3) INPUT Menu and Setting Categories

>> INPUT <<
>VIDEO IN: HDMI
AUDIO IN: HDMI
RESOLUTION: AUTO
PATTERN: BLUE

Setting

◀,▶ ▲,▼ SET ESC Features

location

16

Move to
main
menu

Move to
sub menu

Move to
sub menu

Move to
sub menu

Move to
sub menu

Select video input port

Select audio input port

Select Resolution mode

Select a color pattern when
input is not detected

INPUT

Sub

menu

VIDEO

IN

AUDIO

IN

RESOLU

TION

PATTERN n/a Move to

*Video – SDIcc setting is specifically designed mode for Closed Caption service and some features may not
be supported. (1080P input resolution and pattern image setting)

n/a Move to

category

n/a Move to

category

n/a Move to

category

n/a

Move to
category

category

Move to
the selected
category

Confirm

Confirm

Confirm

Confirm

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

4) ENCODER Sub Menu and Setting Categories

>> ENCODER <<
>SYS DELAY : 650 ms
TS ID : 00001
AUD DELAY : 0000 ms

Setting

location

ENCODER

Sub

menu

SYS

DELAY

TS ID Move

AUD

DELAY

n/a Move to

n/a Move to

digit

Move
digit

◀,▶ ▲,▼ SET ESC Features

category

category

Increase/
decrease
the value

Increase/
decrease
the value

Move to
the
selected
category

Confirm Move to

Apply
settings

Apply
settings

Move to
main
menu

sub
menu

Move to
sub
menu

Move to
sub
menu

Encoder system delay setting.
(*License required)
(*without license, fixed at

650)

TS ID Value setting.

Audio Delay Value setting

17

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

5) PSIP Sub Menu and Setting Categories

>> PSIP <<
>PSIP OUT: ENABLE
MAJOR CH: 04 ch
MINOR CH: 001 ch
NET NAME: ABC

Setting

location

PSIP

Sub

menu

PSIP
OUT

MAJOR

CH

MINOR

CH

NET

NAME

◀,▶ ▲,▼ SET ESC Features

n/a Move to

category

n/a Move to

category

Move
digit

Move
digit

Move
digit

Increase/
decrease
the value

Increase/
decrease
the value

Change
letter

Move to
the
selected
category

Confirm Move to

Apply
settings

Apply
settings

Apply
settings

Move to
main
menu

sub
menu

Move to
sub
menu

Move to
sub
menu

Move to
sub
menu

PSIP output on/off.

Main channel number value
setting.

Minor channel number value
setting.

Channel name setting.
(* Korean letter setting is
available on PC S/W )

18

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

6) MODULATOR Sub Menu and Setting Categories

>> MODULATOR <<
>STAT: KOR-T, 04 ch
SET FREQ
SET FREQ BY KOR-T
SET FREQ BY KOR-C
POWER: 00.0 dBm

Setting

◀,▶ ▲,▼ SET ESC Features

location

MODULA

TOR

Sub

Menu

STAT n/a n/a n/a n/a Frequency setting mode and

SET FREQ Move

SET FREQ

BY

KOR-T

SET FREQ

BY

KOR-C

POWER Increase/

n/a Move to

category

Increase/

digit

Move
digit

Move
digit

decrease
the value

decrease
the value

Increase/
decrease
the value

Increase/
decrease
the value

Increase/
decrease
the value

Move to
the
selected
category

Apply
settings

Confirm Move to

Confirm Move to

Apply
settings

Move to
main
menu

Move to
sub menu

sub menu

sub menu

Move to
sub menu

displays the currently set
value

Output frequency setting

- Frequency input

Output frequency setting

- Terrestrial channel number
input

Output frequency setting

- Cable channel number

Output power setting

19

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

7) IP-OUT Sub Menu & Setting Categories (*option)

>> IP-OUT <<
>OUT: Enable
DST IP ADDRESS
DST UDP PORT: 01234
HOST IP ADDRESS
HOST SUBNET MASK
HOST GATEWAY
HOST MAC ADDR
DATA: Lock
BTR : 19.6 Mbps
ERR#: 0

20

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

Setting

◀,▶ ▲,▼ SET ESC Features

location

IP-OUT

Sub

n/a Move to

category

menu

OUT n/a Change

selection

DST IP

ADDRESS

Move
digit

Increase/
decrease
the value

DST UDP

PORT

Move
digit

Increase/
decrease
the value

HOST IP

ADDRESS

Move
digit

Increase/
decrease
the value

HOST

SUBNET

MASK

Move
digit

Increase/
decrease
the value

Move to
the
selected
category

Apply
selection

Apply
settings

Apply
settings

Apply
settings

Apply
settings

Move to
main
menu

Move to
sub
menu

Move to
sub
menu

Move to
sub
menu

Move to
sub
menu

Move to
sub
menu

IP Output Enable/Disable

Output destination IP address
setting

Output destination UDP port
number setting

Select Host IP Address

Select Host Subnet Mask

HOST

GATE
WAY

HOST

Move
digit

Increase/
decrease
the value

n/a n/a Move to

MAC

ADDR

ERR# n/a Change

selection

Apply
settings

sub
menu

Apply
selection

21

Move to
sub
menu

Move to
sub
menu

Move to
sub
menu

Select Host Gateway Address

Check the MAC Address of
the equipment
(Modification is not possible)

When ‘CLEAR’ is selected,
Output error counter for
monitoring will be initialized

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

8) SYSTEM Sub Menu and Setting Categories

>> SYSTEM <<
>VERSION: 1v00C LOAD
DEFAULT
RESET

Setting

location

SYSTEM

Sub

menu

VERSION n/a n/a n/a n/a Display device’s version

LOAD

DEFAULT

RESET n/a Move to

◀,▶ ▲,▼ SET ESC Features

n/a Move to

category

n/a Move to

category

category

Move to
the
selected
category

Confirm Move to

Confirm Move to

Move to
main
menu

sub
menu

sub
menu

Output power frequency
setting

- Cable channel number
input

Output power setting

22

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

Appendix A. PC GUI Control S/W

A.1. Connect EN3 with PC GUI S/W

PC GUI S/W is connected via USB Port.

A.2. PC GUI S/W Driver installation and verification

When PC and EN3 is connected, make sure that following driver is created PC. (COM number may differ from
ours)

(*if driver is not installed automatically, install CypressDriverinstaller.exe which comes with PC GUI S/W.)

Connect with
control PC via USB

23

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

A.3. PC GUI S/W Connection and Control

Select a COM port
which identified in
Device Manager

Click ‘Connect’

Read the
value

Run Status monitoring

24

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

You can change settings by clicking specific
buttons.

25

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

A.4. PC GUI S/W Firmware Update

Click following button to open firmware update window..

Click ‘Open’ and choose specific file and click ‘Download’ to start the firmware update.

Make sure update is completed by checking the following message.

Click

Open file

Run update

26

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

Appendix B. Frequency Table

Korea Terrestrial Korea Cable

Center

Frequency (MHz)

VHF LOW BAND

FM BAND

88~108MHz

MID BAND

VHF HIGH BAND

SUPER BAND

Channel Number

2 57 54-60 2 57 54-60
3 63 60-66 3 63 60-66
4 69 66-72 4 69 66-72
5 79 76-82 5 79 76-82
6 85 82-88 6 85 82-88

7 177 174-180 7 177 174-180
8 183 180-186 8 183 180-186

9 189 186-192 9 189 186-192
10 195 192-198 10 195 192-198
11 201 198-204 11 201 198-204
12 207 204-210 12 207 204-210
13 213 210-216 13 213 210-216

Frequency

Range
(MHz)

Channel Number

95 93 90~96
96 99 96~102
97 105 102~108
98 111 108~114
99 117 114~120
14 123 120-126
15 129 126-132
16 135 132-138
17 141 138-144
18 147 144-150
19 153 150-156
20 159 156-162
21 165 162-168
22 171 168-174

23 219 216-222
24 225 222-228
25 231 228-234
26 237 234-240
27 243 240-246
28 249 246-252
29 255 252-258
30 261 258-264
31 267 264-270
32 273 270-276
33 279 276-282
34 285 282-288
35 291 288-294
36 297 294-300

Center

Frequency (MHz)

Frequency

Range
(MHz)

27

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

HYPER BAND

UHF BAND

Korea Terrestrial Korea Cable

14 473 470-476 66 477 474-480
15 479 476-482 67 483 480-486
16 485 482-488 68 489 486-492
17 491 488-494 69 495 492-498
18 497 494-500 70 501 498-504
19 503 500-506 71 507 504-510
20 509 506-512 72 513 510-516
21 515 512-518 73 519 516-522
22 521 518-524 74 525 522-528
23 527 524-530 75 531 528-534
24 533 530-536 76 537 534-540
25 539 536-542 77 543 540-546
26 545 542-548 78 549 546-552
27 551 548-554 79
28 557 554-560 80 561 558-564
29 563 560-566 81 567 564-570
30 569 566-572 82 573 570-576
31 575 572-578 83 579 576-582
32 581 578-584 84 585 582-88
33 587 584-590 85 591 588-594
34 593 590-596 86 597 594-600
35 599 596-603 87 603 600-606
36 605 602-608 88 609 606-612
37 611 608-614 89 615 612-618
38 617 614-620 90 621 618-624
39 623 620-626 91 627 624-630
40 629 626-632 92 633 630-636
41 635 632-638 93 639 636-642
42 641 638-644 94 645 642-648
43 647 644-650 100 651 648-654
44 653 650-656 101 657 654-660

37 303 300-306
38 309 306-312
39 315 312-318
40 321 318-324
41 327 324-330
42 333 330-336

43 339 336-342
44 345 342-348
45 351 348-354
46 357 354-360
47 363 360-366
48 369 366-372
49 375 372-378
50 381 378-384
51 387 384-390
52 393 390-396
53 399 396-402
54 405 402-408
55 411 408-414
56 417 414-420
57 423 420-426
58 429 426-432
59 435 432-438
60 441 438-444
61 447 444-450
62 453 450-456
63 459 456-462
64 465 462-468

65 471 468-474

555 552-558

28

ez-Caster EN3 : MPEG2/H.264 HD Encoder / Manual

Korea Terrestrial Korea Cable

45 659 656-662 102 663 660-666
46 665 662-668 103 669 666-672
47 671 668-674 104 675 672-678
48 677 674-680 105 681 678-684
49 683 680-686 106 687 684-690
50 689 686-692 107 693 690-696
51 695 692-698 108 699 696-702
52 701 698-704 109 705 702-708
53 707 704-710 110 711 708-714
54 713 710-716 111 717 714-720
55 719 716-722 112 723 720-726
56 725 722-728 113 729 726-732
57 731 728-734 114 735 732-738
58 737 734-740 115 741 738-744
59 743 740-746 116 747 744-750
60 749 746-752 117 753 750-756
61 755 752-758 118 759 756-762
62 761 758-764 119 765 762-768
63 767 764-770 120 771 768-774
64 773 770-776 121 777 774-780
65 779 776-782 122 783 780-786
66 785 782-788 123 789 786-792
67 791 788-794 124 795 792-798
68 797 794-800 125 801 798-804
69 803 800-806 126 807 804-810

127 813 810-816
128 819 816-822
129 825 822-828

UHF BAND

130
131 837 834-840
132 843 840-846
133 849 846-852
134 855 852-858
135 861 858-864
136 867 864-870
137 873 870-876
138 879 876-882
139 885 882-888
140 891 888-894
141 897 894-900
142 903 900-906
143 909 906-912
144 915 912-918
145 921 918-924
146 927 924-930
147 933 930-936
148 939 936-942
149 945 942-948
150 951 948-954
151 957 954-960
152 963 960-966
153 969 966-972
154 975 972-978
155 981 978-984
156 987 984-990
157 993 990-996
158 999 996-1002

831 828-834

29