Page 1
Mod el
1044C-54 Series II
TELEHANDLER
Performance
Rated Capacity
10,000 lb (4,536 kg)
Maximum Lift Height
54 ft (16.5 m)
Frame Leveling
10 degrees
Lift Speed (boom retracted, no load)
Up: 15.6 sec
Down: 14.6 sec
Boom Speed (no load)
Extend: 15.2 sec
Retract: 11.3 sec
Travel Speed Forward
22 mph (35 kmph) max.
Drawbar Pull (loaded)
21,700 lb (9,843 kg)
Operating Weight
With 50 in. Carriage and Forks
32,697 lb (14,931 kg)
Forward Reach
45 ft (13.7 m)
Horizontal Load Placement
80 in. (2.0 m)
Standard Specifications
Engine
Make and Model John Deere 4045TF
Fuel No. 2 Diesel
Cycles 4
No. of Cylinders 4
Displacement 276 cu in (4.5 L)
Rated Speed 2,500 rpm
Max. Gross BHP 115 hp (85 kW)
Fuel Tank 36 gal (136 L)
Engine Block Heater
Engine Filters
Two-stage dry air cleane — centrifugal
pre-cleaner with continuous dust ejector
plus replaceable primary dry filter element
and safety element.
Visual service indicator.
Replaceable spin-on fuel filter. Full-flow
replaceable spin-on engine oil filter.
Electrical System
Voltage: 12V
Alternator: 95 amp
Battery: 925 cold cranking amps at 0°F
Transmission
Modulated powershift.
4-speed forward and 3-speed reverse.
Axles
Full-time planetary 4-wheel drive.
Oscillating rear axle.
Service Brakes
Hydraulically actuated inboard wet disc brakes.
Parking Brakes
Spring applied hydraulic release brake with
transmission declutch feature.
Tires
Standard: 400/75-28
Cab
Certified ROPS/FOPS structure.
Suspension seat
Steering wheel mounted horn.
Rear view mirrors.
Steering
4-wheel circle, 4-wheel crab, 2-wheel front.
Instruments
Hydraulic oil temperature, fuel level, tachometer,
and hourmeter gauges.
Warning indicators for transmission
oil temperature, hydraulic oil temperature, engine
oil pressure, alternator charging,
air filter restriction, hydraulic oil filter
restriction, and low brake pressure.
Indicators for parking brake and
RAS System.
Controls
Multi-function, fully proportional pilot operated
joystick controls for boom functions, carriage tilt,
auxiliary control, frame leveling, and horizontal
load placement system.
Hydraulic System
Load sensing dual gear pumps.
33.5 gal (127 L) system capacity.
Front Outriggers
Axle mounted high clearance outriggers allow
frame leveling without changing stance.
Auxiliary Hydraulics
Used for all attachments equipped with cylinders
or other hydraulic components. Consists of valves,
controls and hydraulic lines.
Accessories & Options
Enclosed All Weather Cab
Work Lights
Road Lights
Rotating Beacon
Tire Options
Foam-filled
Rock Lug
Second Auxiliary Hydraulic Line
Air Conditioning
Extra Battery
Attachments
Standard Carriage
50 in. (1.3 m) or 74 in. (1.9 m)
± 10° Side Tilt Carriage
50 in. (1.3 m) or 74 in. (1.9 m)
± 45° Swing Carriage
72 in. (1.8 m)
Pallet Forks
2 x 5 x 48 in.
(51 mm x 127 mm x 1.2 m) or
2 x 5 x 60 in.
(51 mm x 127 mm x 1.5 m)
Lumber Forks
1.75 x 7 x 60 in.
(45 mm x 178 mm x 1.5 m)
Block Forks
2 x 2 x 48 in.
(51 mm x 51 mm x 1.2 m)
Truss Boom With or Without Winch
10 ft (3.0 m)
8 ft (2.4 m) Tower
Light Material Bucket
1.25 cu yd (0.95 m3) capacity
96 in. (2.4 m) wide
Hydraulic Fork Position Carriage
50 in. (1.3 m)
Single and dual fork options
Lifting Hook
Fork Mounted Work Platform
Page 2
Mod el
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
48 ft (14.6 m)
52 ft (15.8 m)
56 ft (17.1 m)
60 ft (18.3 m)
44 ft (13.4 m)
40 ft (12.2 m)
32 ft (9.8 m)
28 ft (8.5 m)
24 ft (7.3 m)
20 ft (6.1 m)
16 ft (4.9 m)
12 ft (3.7 m)
8 ft (2.4 m)
4 ft (1.2 m)
-4 ft (-1.2 m)
-8 ft (-2.4 m)
32 ft36 ft40 ft44 ft48 ft 28 ft 24 ft 20 ft
80
60
50
40
30
20
10
-5
16 ft 12 ft 8 ft
TRANSACTION
80 in. (203 cm)
TRANSACTION
80 in. (203 cm)
4 ft 0 ft
0 ft (0 m)
36 ft (11.0 m)
LULL 1044C-54
T E L E H A N D L E R
0
3,000 lb (1,361 kg)
2,000 lb (907 kg)
1,500 lb (680 kg)
4,000 lb (1,814 kg)
5,000 lb (2,268 kg)
6,000 lb (2,722 kg)
8,000 lb (3,629 kg)
10,000 lb (4,536 kg)
*
10,000 lb
*
5,000 lb
*
4,000 lb
*
8,000 lb
*
6,000 lb
48 ft (14.6 m)
52 ft (15.8 m)
56 ft (17.1 m)
60 ft (18.3 m)
44 ft (13.4 m)
40 ft (12.2 m)
32 ft (9.8 m)
28 ft (8.5 m)
24 ft (7.3 m)
20 ft (6.1 m)
16 ft (4.9 m)
12 ft (3.7 m)
8 ft (2.4 m)
4 ft (1.2 m)
-4 ft (-1.2 m)
-8 ft (-2.4 m)
32 ft36 ft40 ft44 ft48 ft 28 ft 24 ft 20 ft
80
60
50
40
30
20
10
-5
16 ft 12 ft 8 ft 4 ft 0 ft
0 ft (0 m)
36 ft (11.0 m)
LULL 1044C-54
T E L E H A N D L E R
0
3,00
0 lb (1,361 kg)
2,000 lb (907 kg)
1,500 lb (680 kg)
4,000 lb (1,814 kg)
5,000 lb (2,268 kg)
6,000 lb (2,722 kg)
8,000 lb (3,629 kg)
10,000 lb (4,536
kg)
*
10,000 lb
*
5,000 lb
*
4,000 lb
*
8,000 lb
*
6,000 lb
DENOTES TRANSFER
CAPABILITIES WITH
OUTRIGGERS DOWN
DENOTES TRANSFER
CAPABILITIES WITH
OUTRIGGERS DOWN
*
X,000 lb
*
X,000 lb
INDICATES REAR
OSCILLATION LOCK
ENGAGED
INDICATES REAR
OSCILLATION LOCK
ENGAGED
1044C-54 Series II
TELEHANDLER
Dimensions
Length (less forks) 246 in. (6.24 m)
Width 101 in. (2.57 m)
Height 97 in. (2.46 m)
Wheelbase 124 in. (3.14 m)
Ground Clearance 16 in. (406 mm)
Outside Turning Radius 170 in. (4.32 m)
Maximum Reach from Front Tires to
24 in. (609 mm) Load Center 45 ft (13.7 m)
Due to continuous produc t improvem ents, JLG Industries
reser ves the right to make sp ecification and/or equipment
changes w ithout prior notification. This machine meets or
exceeds ASME B56.6 -1998 as originally manufac tured for
intended applications.
Form No.: SS-L1044C-54- 0405-10M
Part No.: 3132504
R051106
Printed in USA
IMPORTANT
Rated lift capacities shown are with machine equipped
with carriage and pallet for ks. The machine must be level
on a firm surface with undamaged, properly inflated tires.
Machine specifications and stability are based on rated
lift capacities at specific boom angles and boom lengths.
(If specifications are critical, the proposed application
should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as uns table
and dangerous machine conditions will result.
DO NOT tip the m achine forward to determine the
allowable load.
Use only JLG approved att achments with proper material
handler model/attachment load capacit y charts displayed
in the operator’s cab. OSHA requires all rough t errain
forklift operators be trained according to OSHA 29 CFR
1910.178 (1).
JLG Industries, Inc.
1 JLG Drive
McConnellsburg, PA 17233-9533
Telephone 717-485-5161
Toll-free in US 877-JLG-LIFT
Fax 717-485-6417
www.jlg.com
An Oshkosh Corporation Company
Loading...