Page 1
INTERACTIVE
PLAYGROUND
EN - User manual
MÖBIL
Page 2
!
Important Safety Instructions
1. Read and keep these instructions.
2. Always connect the product to a grounded circuit
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Use in accordance with the manufacturers
instructions.
6. Only use attachments/accessories specified by the manufacturer.
7. Unplug this apparatus during lightning storms or when unused for long periods of time.
8. Do not use Lû system in an environment where temperatures exceed +40°C (104°F).
9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
10. To completely disconnect AC power from this apparatus, the power supply cord must be
unplugged.
11. Do not expose this apparatus to dripping or splashing and ensure that no objects filled
with liquids.
12. Lü loudspeakers are easily capable of generating sound pressure levels sufficient to cause
permanent hearing damage to anyone within normal coverage distance. Caution should
be taken to avoid prolonged exposure to sound pressure levels exceeding 90 dB.
IMPORTANT: Do not modify this product! Changes or modifications not expressly approved by
the manufacturer could void the user’s warranty.
About This Guide
The Lü Interactive System User Manual has basic product
information such as safety and operation.
Disclaimer
Thie information and specifications contained in this user
manual are subject to change without notice.
INTERACTIVE
PLAYGROUND
Page 3
Lü Limited Warranty
Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty.
What Is Covered: Lü Interactive Playground inc. (“Lü”) warrants to the original
purchaser of the Epson projector product enclosed in Lü system, with this limited
warranty statement that the product will be free from defects in workmanship and
materials for a period of two (2) years from the date of original purchase. This
limited warranty applies only to the projector and not to the projector lamp, which
carries a limited warranty period of ninety (90) days from the date of original
purchase. For warranty service, you must provide proof of the date of original
purchase.
One-Year System Limited Warranty.
What Is Covered: Lü Interactive Playground inc. (“Lü”) warrants to the original
purchaser of the system this limited warranty statement that the product will be free
from defects in workmanship and materials for a period of one (1) year from the
date of original purchase.
INTERACTIVE
PLAYGROUND
Page 4
Congratulations on your purchase of this Lü Interactive Playground!
This system was crafted with passion by our team in Canada and we really hope you
will enjoy using it for many years to come!
What Is Included
(1) Main Module (5) parts:
1x Main Module
6500 lumen WXGA projector and 3D camera system protected
in a custom enclosure
2x Light brackets
Comprising (3) LED RGBW 180w light fixtures
2x Speaker brackets
Comprising 300w speaker
Transport case with (2)
remote controllers:
(1) Projector’s remote controller
(1) Lü system remote controller
(1) Portable Stand (1) Cushion Kit (14) parts
INTERACTIVE
PLAYGROUND
Page 5
Interactive screen
Maximum size: 18’ (5.5m) Large x 10.1’ (3.1m) High
Must be a flat, solid, bright surface.
Playground dimensions and specifications
Operation
Game Area
Centred in front of the interactive screen
Recommended size: 30’ (9m) Large x 20’ (6m) Long
Minimum ceiling heights: 10’ (3m)
Maximum ceiling heights: N/A
To maximize immersion, ambiant lighting must be controllable. When our system is
in operation, general lights must be turned off and no window should allow direct
sunlight in the room.
INTERACTIVE
PLAYGROUND
Page 6
Operation
Site and screen preparation
1
2
Mark the (4) corners of your projection location on the wall
Ideal position is to set the bottom of the screen at 1 feet (30cm) from the floor.
Maximum Width of 18’ (5,48m), height of 10.1 feet (3,1m).
***Always respect a ratio of 16:9 for your screen.
Position the lifting tower
Position the lifting tower 19 feet (5.8m) from the wall, centred with the screen.
The winch should be facing the opposite side of the screen for easier operation.
3
Secure lifting tower in place
Using the fours swivels on the legs, make sure le lifting tower is stable, and set
perfectly vertical using the included spirit level.
INTERACTIVE
PLAYGROUND
Page 7
Operation
Assembling the unit
1
Install main module on stand
The pin beneath main module has to fit
inside the pole from the lifting tower.
***Make sure you screw the lock bolt in place.
2
Install speaker brackets on main module
Lock brackets in place using locking pins.
A. B.
3
Install light brackets on speaker brackets
Lock brackets in place using locking pin. Position
light fixture to light the floor between the screen
and the lifting tower.
A.
B.
4
Connect all cables from speaker and light brackets to main module.
Follow ID codes and colours to connect cables to the right socket.
7
Turn on the system, and make sure all components are working
5
Focus light fixtures positions
Focus fixtures so the light is directed evenly on
the floor, and not on the projection screen.
6
Connect power cable to main unit
Tie the cable to the top of the lifting tower main shaft using the
velcro attach, so when you lift, the cable will stay close to it.
Plug power cable, turn on projector, and wait for the system to boot. Make sure all
components are working properly and adjust sound level if needed on speakers.
8
Lift tower to final position (bottom of unit at 10’ (3m) from the floor)
INTERACTIVE
PLAYGROUND
Page 8
A. Select the button in the settings ( ) menu.
Operation
Projector and system calibration
1
Focus projector into position
A. Reset geometry settings from previous configurations
REMOTE CONTROL BUTTON
GEOMETRY
+
ESC (during 2sec)
B. Position image to cover the 4 markers on the wall LENS SHIFT
+
ARROWS
ZOOM
+
ARROWS
FOCUS
+
ARROWS
C. Fine-tune position of the 4 corners on your 4 markers GEOMETRY / QUICK CORNERS
TOP/LEFT
**Make sure the projector is turned on, on the right input (you should see Lü’s interface
from the computer), and the aspect ratio of the projector should be on FULL.
+
ARROWS
TOP/RIGHT
+
ARROWS
BOTTOM/LEFT
+
ARROWS
BOTTOM/RIGHT
+
ARROWS
2
Calibrate the camera
B. Click on the button.
C.
D. Press “Esc” and “Enter” to return to the homepage.
Throw a ball within the white section to confirm that the
contact of the ball on the wall is now adjusted.
While the system is calibrating, a calibration grid will appear and after a few
seconds the message “Calibration Successful” will display.
E.
INTERACTIVE
PLAYGROUND
Page 9
Remote controller
1
2
3
Move Selection
Select Button
1. Mute
2. Left Click Button
(and Click for drag)
3. Right Click Button
Volume
2
3
On/Off
Switch
USB charging
port
Quit game or
program
Confirm Choices
& Start Games
Pause / Start
Operation
INTERACTIVE
PLAYGROUND
Page 10
General operations
Turn ON/OFF lights (Main Menu): F1
Volume UP: V+
Volume DOWN: VExit Game: Esc + ENTER
Pause Game: SPACE BAR
Choose Game: ←, ↑, →, ↓
Move Selection: ←, ↑, →, ↓
Begin Game: ENTER or OK
Select: ENTER or OK
Exit Lü / Go back to Windows Desktop: Win + D
Move Mouse: Use Trackpad
Left click: One Trackpad Click or Left Click Button
Right click: Double Trackpad Click or Right Click Button
Mute : Mute Button
Drag with mouse : Click on the left click button while moving finger on the trackpad
Remote controller - Shortcuts
Galactic Game
Go to next level: N
Puzz Game
Highlight errors: B
Change image: N
Operation
Target
Display settings: O
Reset timer and points:: R
INTERACTIVE
PLAYGROUND
Page 11
Operation
Lighting Application
With the Lü system, you can control the different spotlights for personalized lighting of the
room according to the ongoing event (corporate event, school activity, intra-company
challenge, fair, gala, show, etc.). To personalize lighting, follow these steps:
1. Select the side of the gym you want to control (D1, D2 or both)
2. To select from the preset list, choose from the dropdown menu
and click on the Apply button.
3. To select a color, click on the color you want.
4. You can always adjust the general light level using the MASTER LIGHT LEVEL slider.
INTERACTIVE
PLAYGROUND
Page 12
Troubleshooting
How to turn computer ON?
Computer will automatically boot connected to a power alimentation. To reboot it,
shutdown the power alimentation, wait one minute, and turn it back on.
How to turn the projector ON?
To turn the projector ON, first make sure the modules are powered. Then, press the
“ON” button using the projector remote and wait for the image to be displayed. The
projector will also boot automatically when it receives electrical power.
INTERACTIVE
PLAYGROUND
Page 13
Technical Specifications
MAIN MODULE
LIFTING TOWER
CUSHION KIT
LIGHT
BRACKET
SPEAKER
BRACKET
INSTALLATION
POSITION
On the lifting tower
19’ (5.8m) centred
in front of interactive
screen
Over the lifting
tower
On the speaker
bracket
On the main
module
SIZE
(L X W X H)
(inches)
23 x 28 x 16 ‘’
58 x 71 x 40 cm
65 x 14 x 14 ‘’
166 x 36 x 36 cm
2 bags of:
36 x 28 x 18 ‘’
92 x 71 x 46 cm
2 brackets of:
37.5 x 11 x 13 ‘’
95 x 28 x 33 cm
2 brackets of:
19.5 x 15 x 10 ‘’
50 x 38 x 26 cm
WEIGHT
68.5 lbs
(31 kg)
173 lbs
(33 kg)
TBD
21.5 lbs
(10 kg)
14.5 lbs
(6.6 kg)
POWER
CONSUMPTION
888W
N/A
N/A
(included in main
module specs)
(included in main
module specs)
CASE #1
CASE #2
INCLUDED
COMPONENTS
Main module, speakers and
remotes
Light brackets
SIZE
(L X W X H)
52 x 28 x 26 ‘’
132 x 71 x 66 cm
45 x 16.5 x 25 ‘’
114 x 42 x 64 cm
WEIGHT
192 lbs
(87.2 kg)
89 lbs
(40.6 kg)
Optional transport cases
INTERACTIVE
PLAYGROUND
Page 14
Complete components documentation
For more detailed information about key Lü MOBILE system
components:
Video projector - Epson G7000w projector
https://files.support.epson.com/docid/cpd5/cpd51161.pdf
Loudspeakers - DB Technology K330 speakers
http://www.dbtechnologies.com/public/CMS/Files/777/K300MAN_rev5_27072010.pdf
PC Computer - Intel NUC
https://www.intel.com/content/www/us/en/products/boardskits/nuc/kits/nuc6i5syh.html
Contact information
For support, any questions or comments on this product:
+1 418 781-0797
support@play-lu.com
202-707 St-Vallier E. St
Quebec, QC, Canada
G1K 3P9
INTERACTIVE
PLAYGROUND
Loading...