PN 46003171 PN 46003171
2 3
battery pack
Connect the USB cable to the eBeam Edge
Battery Pack. The battery meter will blink to
indicate that the battery is charging.
For a full charge, keep the Battery
Pack plugged in for approximately
3 hours, until all 5 LEDs are on and
have stopped blinking.
Charging Instructions (continued)
5
4
3
2
1
3h
Quick Setup
www.e-be am.com | 1. 888.9 9.eBeam
Connect
twitter.com/eB eam
search for e Beam
youtube.c om/LuidiaTech
Luidia Inc. is the creator of eBeam® interactive technology that helps the world capture and share content. The company’s products
are utilized by organizations of all sizes, with hundreds of thousands of users across multiple industries and geographies. For more
information on Luidia, please visit www.e-beam.com or follow on Twitter and Facebook @eBeam.
©2013 Luidia, Inc. All rights reserved. eBeam and the Luidia logo are registered trademarks of Luidia, Inc. Other product names and
logos are the property of their respective owners.
{ Empowering you to interact, share, create, learn and educate in your interconnected world. }
1 12 3
c
l
i
c
k
!
c
l
i
c
k
!
Slide the eBeam Edge into the Edge
Battery Pack as shown until you feel
the battery pack snap into place.
Press and hold the power button momentarily
to turn on the battery pack.
If the battery meter is not illuminated or the battery
level is low, you need to charge the battery pack
(see charging instructions).
The eBeam Edge with Battery
Pack is ready for use.
Setup Instructions
battery pack
Locate the USB cable and USB power
supply provided with your eBeam Edge
Wireless. Plug the USB cable into the
USB power supply and plug the power
supply into a wall outlet.
Charging Instructions
Loading...