Lucent Technologies APX 1000 User Manual

APX® 1000 Universal Gateway
A pplications
• Wireline and wireless Flexibility — turn on revenue-generating IP
• Port wholesaling
• VoIP
F eatures
• Highest throughput and most universal ports in its class per 7-foot rack (10,800 DS0s)
• Universal port technology for “any service, any port, any time” versatility
• Uniform capacity for consistent application performance and density, up to platform’s maximum port capacity
• SS7-based ICD for dial-up IP port wholesaling
• Feature-rich True Access (TAOS) — over 35 million ports installed worldwide
• Lucent Voice.Natural technology from Bell Labs for enhanced VoIP call quality
• Multiple IP protocol support including H.323, IPDC, V.92 (with V.90), PIAFS (PHS), SIP, H.248, V.110, WORMARQ, M2UA, IUA
® Operating System

B enefits

services whenever and wherever you want them
Scalability — deploy your choice of high-speed ingress and egress modules; implement access solutions with support for 96 to 720 DS0s per chassis
Reduced capital expenditures — deliver port
• wholesaling, VoIP, dial-up IP access and voice services from the same platform
Reduced operating and ownership costs — universal port technology and high port density in a small footprint optimize CO space utilization
Carrier-class network reliability — redundant components maximize uptime and serviceability; stable, carrier-proven TAOS helps sustain high availability
Easy to upgrade — processing modules interchange among Universal Gateway platforms
Unmatched investment protection — universal
• port capability and a wide range of IP protocols support emerging applications
APX® 1000 Universal Gateway

Software Technical Specifications

1. Operating System True Access® Operating System (TAOS) embedded software technology for edge access platforms including Lucent MAX TNT® and APX® family of Universal Gateway and combines multi-platform support with hardware-specific capabilities
2. Protocol Support

WAN/LAN

TCP/IP, UDP/IP, SCTP/IP, TCP Clear, PPP, Sync/Async-PPP, HDLC, GRE T1: PRI, RBS: Loop-Start, Wink-Start, R1, MF FG-D E1: PRI, E1 R2 MF (country-specific call progress tones) Routing RIP, RIP2, OSPF, BGP4, IGMP

VPN/tunneling

ATMP, L2TP, IP in IP, L2F, PPTP, Virtual Routers
SS7 call control and signaling
IPDC, E1/T1 tunneling using IPDC, H.248
Non-SS7 call control and signaling H.323v2, SIP, M2UA, IUA Fax-over-IP/modem-over-IP
Group III Fax, T.38, Transparent Fax, Transparent Modem
Modem termination/data transfer
V.92: Modem on Hold, QuickConnect, PCM Up-stream V.90, K56Flex, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22A/B, V.23, V.21, V.44, V.42, V.42bis, V.110, V.120, (PHS) PIAFS,
Administrative
FTP, TFTP, SNTP, DNS
ATM
UNI 3.1, PVC (CBR, VBR)
ISDN
AT&T, Northern Telecom, Q.931 GloBanD, Japan-PRI, VN3-PRI, OneTR6-PRI, Net5-PRI, Danish-PRI, Australia-PRI, National ISDN 2 NFAS with D channel back-up Network and user-side ISDN
3. Voice over IP Support –
with Lucent Voice.Natural
CODECs supported: G.711 a-law & µ-law, G.729 (a and b), G.723.1 DTMF support: in-band, RFC 2833, via H.245 (H.323) Tone generation and detection IPDC/H.248 out of band DTMF Announcement storage and generation Echo cancellation: G.168-2000, G.165 – Up to 64 ms echo tail Voice activity detection, comfort noise generation, silence suppression Dynamic/static jitter buffer Frame loss concealment/frame repeat Bell Labs Speech Normalization (inverse IRS filtering) Packet fragmentation – for greater QoS with VoIP client Applications
4. Bandwidth Management and Data Compression MLPPP, MP/MP+, MPPC, BACP, TCP header compression, ATM traffic shaping, STAC, MS-STAC, STAC-9
5. QoS RFC 2474 – Differentiated Services Code Point (DSCP) support RFC 791/1349 type of service (ToS) support VoIP call statistic generation
6. Security and Authentication RADIUS, TACACS/TACACS+, PAP, CHAP, MSCHAP v1+v2, DNIS, CLID, callback, token, local password, call-type pre-authentication
7. Management SNMPv2, NavisAccess™ System, SSHv1 for Telnet, console, COT testing
Loading...
+ 2 hidden pages