Lucent Technologies 6402D, 6402 User Manual

230738i3.book Page 1 Thursday, July 8, 1999 3:40 PM

6402 and 6402D Telephones User’s Guide

Contents

The 6402 and 6402D Telephone . . . . . . . . . . . . . . . . . . . . . 1

Headsets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Headpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Call-Handl in g Fe a tures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Selecting a Personalized Ring . . . . . . . . . . . . . . . . . . . . . . 6

Selected Vo ic e F e at u res . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Access a Voice Feature on the 6402

and 6402D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using the Display on the 6402D . . . . . . . . . . . . . . . . . . . . 12

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Desktop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Wall Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Removing the Telephone Tray . . . . . . . . . . . . . . . . . . . 17

Installing the Telephone Number Card. . . . . . . . . . . . . 18

Tones and Their Meaning . . . . . . . . . . . . . . . . . . . . . . . . . 19

Line and Feature Button Lights . . . . . . . . . . . . . . . . . . . . 20

555-230-738 Comcode 108339011 Issue 3 April 1999

230738i3.book Page 2 Thursday, July 8, 1999 3:40 PM

NOTICE

While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Lucent Technologies can assume no responsibility for any errors. Changes or corrections to th e i nfo rma t io n c ont ain ed in this document may be incorporated into future issues.

TO ORDER COPIES OF THIS DOCUMENT

Contact: Lucent Technologies BCS Publications Center

Order: Document No. 555-230-738

HEARING AID COMPATIBILITY

2855 N. Franklin Road Indianapolis, IN 46219 Domestic: 1 800 457-1235International: 1 317 322-6791 Domestic Fax: 1 800 457-1764International Fax: 1 317 322-6699

Issue 3, April 1999

This telephone is Hear ing Aid Compat ible (HAC) and th us all units hav e “HAC” printed on them.

YOUR RESPONSIBILITY FOR YOUR SYSTEM’S SECURITY

Y o u are respo nsibl e for the securi ty of your system . Lucen t Technologies does not warrant that this product is immune from or will prevent unauthorized use of common-carrier telecommunication services or facilities accessed through or connected t o it. Luc ent Technologies wil l not be respon sible for any charge s that result from such unauthorized use. Product administration to prevent unauthorized use is your responsibility and your system manager should read all documents provided with this product to fully understand the features available that may reduce your risk of incurring charges.

TRADEMARKS

DEFINITY and AUDIX are registered trademarks of Lucent Technologies. Mirage, Star Set, and Supra are registered trademarks of Plantronics, Inc.

OBTAINING PRODUCTS

To learn more about Lucent Technologies products and to order any of these products, contact Lucent Direct, the direct-market organization of Lucent Technologies Business Communications System. Access their web site at www.lucentdirect. com or call the following numbers: customers should call 1 800 451-2100 or account executives can contact Lucent Direct at 1 800 778 1880 (voice) or 1 800 778-1881 (fax).

THE “CE” MARK

If the “CE” mark is affixed to this equipment. it means that it conforms to the European Union Electromagnetic Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC).

230738i3.book Page 3 Thursday, July 8, 1999 3:40 PM

IMPORTANT USER SAFETY INSTRUCTIONS

The most careful attention has been devoted to quality standards in the manufacture of your new telephone. Safety is a major factor in the design of every set. But, safety is YOUR responsibility too.

Please read carefully the hel pful tips listed below and on the next pa ge. Thes e suggestions will enable you to take full advantage of your new voice terminal. Then, retain these tips for later use.

CAUTION:

This telephone is NOT for residential use. It is for business systems applications ONLY. It will NOT operate on public networks. It MUST BE connected to a DEFINITY Enterprise Communications Server. Use in a residential environment could result in an electrical short circuit when the telephone wiring is set up to provide other applications, for example, for appliance control or power transformers. The AC power used in these ap plica tions may create a safety hazard by placing a direct short circuit across the telephone wiring.

Use

When using your telephone equipment, the following safety precautions should always be follow ed to reduce the risk of fire, ele ctric shock, and injury to persons.

• Read and understand all instructions.

• Follow all warnings and instructions marked on the telephone.

• This telephone can be hazardous if immersed in water. To avoid the

possibility of electric shock, do not use it while you are wet. If you accidentally drop the tel ephon e int o water, do not retrieve it until you have first unplugged the line cord from the modular wal l jack. Then, cal l servic e personnel to ask about a replacement.

• Avoid using the telephone duri ng ele ctrical storms i n your i mmediate ar ea.

There is a risk of electric shock from lightning. Urgent calls should be brief. Even though protective measures may have been installed to limit electrical surges from entering your business, absolute protection from lightning is impossible.

• If you suspect a natural gas leak, report it immediately, but use a

telephone away from the area in question. The telephone’s electrical contacts could generate a tiny spark. While unlikely, it is possible that this spark could ignite heavy concentrations of gas.

230738i3.book Page 4 Thursday, July 8, 1999 3:40 PM

• Never push objects of any kind into the equipment through housing slots

since they may touch hazardous voltage points or short out parts that could result in a risk of elec tric shock. Never spill liquid of any kind on the telephone. If liquid is spilled, however, refer servicing to proper service personnel.

• To reduce the risk of electric shock, do not disassemble this telephone.

There are no user serviceable parts. Opening or removing covers may expose you to hazardous voltages. Incorr ect reassembly can cause electric shock when the telephone is subsequently used.

Service

1. Before cleaning, unplug the telephone from the modular wall jack. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

2. Unplug the telephone from the modular wall jack. Be sure to refer servicing to qualified service personnel when these conditions exist:

— If liquid has been spilled into the telephone. — If the telephone has been exposed to rain or water. — If the telephone has been dropped or the housing has been

damaged.

— If you note a distinct change in the performance of the telephone.

SAVE THESE INSTRUCTIONS

When you see this warning symbol o n the produc t, refer

to this instructions booklet packed with the product for more information before proceeding.

230738i3.book Page 1 Thursday, July 8, 1999 3:40 PM

The 6402 and 6402D Telephones

There are two 6402 telephones: the basic 6402 telephone and the 6402D, which has a 2-line, 16-character display. Familiarize yourself with the features on the 6402 and 6402D telephone, shown in Figure 1 below.

Note: The 6402 and 6402D telephones are exactly the same except for the

display which appears only on the 6402D.

Tel #

11 10

Spkr Feature Hold

Redial Trnsfr Conf

Test Ring

ABC

GHI

TUV

PQRS

WXYZ

DEF

MNOJKL

9 #

FIGURE 1 The 6402D Telephone

The following features correspond to the numbers in Figure 1.

1) Display — available only on the 6402D 7) Volume control button

2) Feature button 8) Message light — labeled

3) Hold button 9) Tray handle

4) Transfer/Test button) 10) Redial button

5) Conf/Ring button 11) Speaker button

6) Dial pad 12) Handset

2 3

4 5

7 8

Feature

230738i3.book Page 2 Thursday, July 8, 1999 3:40 PM

Headsets

Headsets for 6400 Series telephones allow one-touch hands-free operation. To answer a call, press and then the dial pad key on which the Headset feature is ad mi nis tered. (For more information on us in g and the dial pad keys to access features, see “Voice Feat ures ” later in this manual.) To disconnect, press again and then the dial pad key on

Feature

which the Headset feature is administered. Headsets consist of a headpiece (1 in Figure 2 below) and modular base

unit (2). The base unit plugs into the Handset jack (3).

Feature

321 4*56 7

Volum e

FIGURE 2 The Headset Attached to a 6402D Telephone

Headpieces

The following headpieces can be used with these telephones:

— Mirage — StarSet — Supra® Monaural — Adjustable headband and soft ear cushion. — Supra Monaural Noise-Canceling (NC) — Same as above with

noise-canceling microphone that reduces background noise transmission by up to 75 percent.

— Supra Binaural — Sound in both ears. — Supra Binaural Noise-Canceling (NC) — Same as above with

noise-canceling microphone on flexible boom; features windscreen and reduces background noise transmission by up to 75 percent.

— Receiver fits over either ear. Not for noisy environments.

— Eartip fits in ear canal.

230738i3.book Page 3 Thursday, July 8, 1999 3:40 PM

Note: The privacy of the Whisper Page announcement cannot be

guaranteed when telephones have modular base units other than the M10L-8400 plugged into the Handset jack. The M10L-8400 (Comcode: 40763971 5; P EC: 31 22-022) is the only modul ar bas e unit that should be used for the 6400 Series terminals. For more information, see the instructions for the Whisper Page feature in the Voice Features sect ion.

Call-Handling Features

Conference

The Conference feature allows you to conference up to six parties (including yourself) on a call.

To add another party to a call (for a total of six parties)

1. Press .

2. Dial the number of the new party and wait for an answer.

3. When you want to add the new person, press again.

4. Repeat Steps 1 through 3 for additional conference connections.

To add a call you have put on hold to another call you are connected to

1. Press .

2. Press and then release the switchhook.

3. Press again.

Conf

Hold

The Hold feature puts a call on hold until you can return to it.

T o keep a call on hold w hile you answ er another call or perform another task

1. Press .

To answer a new call while active on another

1. Press .

2. To be connected to the incoming call, press and then release the switchhook.

To return to the held call

1. Press and then release the switchhook again.

Note: If your telephone is connected to DEFINITY Release 7.1 or a later

release and if there is only one call on hold at your telephone, you can transfer the call or initiate a conference call by pressing or

Hold

Conf

without first returning to the held call.

Trnsfr

230738i3.book Page 4 Thursday, July 8, 1999 3:40 PM

Redial

The Redial (or Last Number Dialed) feature automatically redials the last extension or outside number you dialed.

To redial the last number that you dialed

1. Press .

Redial

The redialed number can be an outside nu mber (up to 24 digit s), an extens ion, or a trunk or feature access code.

Speaker (Listen-Only)

Note: The Speaker feature allow s you to place calls or acces s other features

without lifting the handset. However, in order to speak to the other party, you must use the handset.

To place a call without lifting the handset or for any listening-only feature (such as monitoring a call on which you have been put on hold)

1. Press .

2. Place a call or access the selected feature.

3. Adjust the speaker volume if necessary: To raise the volume, press the right half of the Volume control button labeled ; to lower the volume, press the left half of the Volume control button lab el ed . If y ou h ave a dis pl ay, it shows the volu me level:

Spkr

->>>>>> +

To change from the speaker to the handset

1. Lift the handset and talk.

To change from the handset to the speaker

1. While the handset is off-hook, press .

Spkr

Y ou can now hang up the handset (within 10 seconds) and the call will remain active on the speaker. However, in order to talk to the other party , you mu st use the handset.

To end a call (while the handset is on-hook and only the speaker is active)

1. With the handset on-hook, press .

Spkr

+ 16 hidden pages