Page 1
1
Wireless USB Adapter
The Wireless USB Adapter is a wireless networking device that is connected to a USB port on your
computer using a USB cable. Using the Wireless USB Adapter, you can communicate with one or more
computers that are equipped with wireless adapters. Where a standard Ethernet card requires a cable
connection to a hub or a patch panel, wireless networking provides the same connectivity without the
wires. Expanding or redesigning your network is easy, and unlike cabled Ethernet, the Wireless USB
Adapter allows users to roam throughout the network while remaining connected to the LAN.
Installation
Follow these steps to install the Wireless USB Adapter:
Step 1 - Install the Wireless USB Adapter.
Step 2 -Add the adapter to your computer and install the drivers.
Step 3 - Reboot your computer so Windows recognizes the adapter.
The following sections give you detailed instructions for completing each step.
Installing the Wireless USB Adapter
The supplied USB cable has a different type of USB connector on each end.
Series A connector. The Series A USB connector plugs into the
USB port on your computer.
Series B connector. The Series B USB connector plugs into the
back of your USB device, such as the port located on the back of
your USB hub.
Page 2
2
To install the Wireless USB Adapter, simply connect the
adapter to an available USB port on your computer using
the supplied USB cable.
Installing Drivers For Windows 98SE
1. Power on your computer. The Add New
Hardware Wizard opens. Click
Next to
continue.
2. When the next window opens, select Search
for a better driver for your device
(Recommended), and click
Next.
Page 3
3
3.
Insert the HomePortal Setup Wizard CD into
your CD-ROM drive, uncheck Floppy disk
drives, select the CD-ROM drive checkbox,
and click
Next.
4. Windows locates the best driver for your
device. Click
Next to continue.
5. After the drivers are copied, click Finish.
6. When the System Setting Change window
opens, click
Yes to reboot your computer and
complete the installation.
Page 4
4
Installing Drivers For Windows ME
Installing Drivers For Windows 2000
1. Power on your computer and insert the
HomePortal Setup Wizard CD into your CD-
ROM drive.
2. When the Add New Hardware Wizard
window opens, select Automatic search for a
better driver (Recommended), and click
Next.
3. After the driver files are copied, click Finish.
4. When the System Settings Change window
opens, click
Yes to reboot your computer and
complete the installation.
1. Power on your computer and insert the
HomePortal Setup Wizard CD into your CD-
ROM drive.
2. When the Found New Hardware Wizard
window opens, click
Next to continue.
Page 5
5
3.
The next window prompts you to install
device drivers. Select Search for a suitable
driver for my device (recommended), and
click
Next.
4. When the Locate Driver Files window opens,
uncheck Floppy disk drives, select the CD-
ROM checkbox, and click
Next.
5. When the Driver Files Search Results window
opens, click
Next.
Page 6
6
Installing Drivers For Windows XP
6. Click Finish to complete the installation.
1. Power on your computer and insert the HomePortal Setup Wizard CD into your CD-ROM drive.
2. When the Found New Hardware Wizard
window opens, select
Install the software
automatically (Recommended)
and click
Next to continue.
3. The driver installs.
Page 7
7
5100-000099-000 Rev C
4.
Click Finish to complete the installation.
Loading...