LUCECO LXB15W72L40, LXB18W92L40, LXB18W48L40, LXB15W38L40, LXB12W48L40 Installation Instructions

Download

Installation & Operating Instructions

LED LuxPack Battens

Wide distribution

Part Code: LXB12W25L40-01, LXB12W48L40-01, LXB15W38L40-01,

LXB15W72L40-01, LXB18W48L40-01, LXB18W92L40-01

ASSEMBLY AND INSTALLATION

• Suitable for use with mains voltage of 110-240Vac.

• Luminaire suitable for surface mounting.

• This product is only suitable for indoor use.

• This product must be disconnected before insulation resistance testing of the lighting circuit.

• Check for electrical cables and pipes before installation.

NOTE – To comply with regulations, Installation must be carried out by suitably qualified competent person and in accordance with the current IEE Wiring Regulations (BS7671) and Building Regulations. A copy of the instructions must be left for the user/Maintenance engineer for future reference.

For Non-UK, Please refer/consult local requirements

ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/ ISOLATED BEFORE COMMENCING INSTALLATION

30,000

HOURS

CRI

IP20

RATED

year

standard

GUARANTEE

1. Remove front lid by pulling up from both ends. (1)

2. Identify a suitable mounting position, install

LuxPack base using suitable fittings. Ensure surface is suitable for installation. For fixing hole locations, please see table on next page. (2)

LuxPack battens are suitable for mounting onto

BESA mountings with 600mm centres. Rear central cable entry or conduit entry from each end should be used.

3. Connect to the electrical supply cable, observing

correct polarity.

Tech Help Line

UK -

0845 194 7584

Non UK -

LXBV1MB26W15

+44 (0)1952 238 100

Luceco is a registered trade mark of Nexus Industries Ltd.

Stafford Park 1 TF3 3BD ENGLAND

Supplied by

BG Electrical Ltd

Visit our website at

www.luceco.uk

4. Connect LED strip and earth connector by

pushing together, between base and lid. (4a)

5. For extra security, anti tamper screws can

be fitted to the 4 corners of the lid to stop removal.

6. Turn on power and operate the LuxPack as

required.

Installation & Operating Instructions

Part Code Batten length

BESA

length

(mm)

b BESA width (mm)

Surface

mounting

length (mm)

Surface

mounting

width (mm)

Luminaire

Lumens

Wattage

Efficacy

Llm/W

Colour

Temp

Current

(mA)

LED LuxPack Battens

LXB12W25L40-01 4ft (1240mm) 600 30 1150 35 2500Llm 24W 104 4000K 800

LXB12W48L40-01 4ft (1240mm) 600 30 1150 35 4800Llm 46W 104 4000K 1500

LXB15W38L40-01 5ft (1560mm) 600 30 1450 35 3800Llm 35W 108 4000K 1000

LXB15W72L40-01 5ft (1560mm) 600 30 1450 35 7200Llm 71W 101 4000K 1500

LXB18W48L40-01 6ft (1840mm) 600 30 1710 35 4800Llm 46W 104 4000K 1000

LXB18W92L40-01 6ft (1840mm) 600 30 1710 35 9200Llm 94W 96 4000K 1500

United Kingdom Warranty

For other territories and for further information, please see www.luceco.uk for details

Products are protected by warranty for a period of 3 year warranty, from date of purchase against defects in material and workmanship (unless otherwise stated). Should a product fail to perform as described within the warranty period it will be repaired or replaced with the same or equivalent product by Luceco, free of charge provided that you: (1) return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return authorization number. Repaired or replaced products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If in our sole discretion, we are unable to repair or replace a defective product, we will refund the purchase price of the product. This warranty will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident, abuse or misuse, or if it has been used in a manner not conforming to our product instructions, has been modified in any way, or has any serial number removed or defaced. Repair or attempted repair will void this warranty. Our maximum liability under the terms of this warranty is limited to the purchase price of the product covered by the warranty. The warranty is given under English Law. If any part of this warranty is deemed unenforceable (including any provision in which we exclude our liability to you) the enforceability of any other parts of the warranty will not be affected. These terms do not reduce your statutory rights. THESE TERMS AND CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Eventually, you may want to replace this fitting;

Environmental Protection W.E.E.E (Wheelie Bin Symbol)

This symbol is known as the “crossed-out” wheelie Bin Symbol”. When this symbol is marked on a product or battery, It means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.