luceco LFSP10W1B30, LFSP20W1B50, LFSP10W1B50, LFSP30W1B30, LFSP20W1B30 Operating Manual

Tech Help Line

UK -

0330 024 9279

Non UK -

[phone]

INSTRUCTIONS FOR NEW INSTALLATIONS

1. Turn OFF power supply, ensure all required equipment and

tools are present.

2. The floodlight is intended for exterior use
and is IP65 rated. Select a suitable mounting
position. Recommended mounting heights as follows,
area illuminated is typically mounting height x3.

3. With a suitable mounting position identified, securely fix the
U shape mounting bracket to the mounting surface.

Mounting brackets

Visit our website at

Luceco is a registered trade mark of Nexus Industries Ltd.

Supplied by

LUCECO

Stafford Park 1 TF3 3BD ENGLAND

www.luceco.uk

GUARDIAN SLIMLINE

LED Floodlights - with PIR

LFSPV1MB03.16

3

GUARANTEE

year

standard

30,000

HOURS

CRI

80

>

IP65

RATED

IP44

RATED

Floodlight PIR

Note - This product range is designed for domestic outdoor use.
Not suitable for interior or commercial use.

Note - If outdoor connection is required, use a suitably
IP Rated junction box.

4. The floodlight is supplied pre-wired with 1.0M of H05RN-F

cable, removing the need to open the housing.

5. Connect the pre-wired cable to the electricity supply,
observing the correct polarity.
LIVE = BROWN
EARTH = GREEN/YELLOW
NEUTRAL = BLUE

6. PIR Adjustments

The PIR sensor detects upto 10 metres across a
120° beam angle.

To aim, it can be rotated and tilted.
PIR can be adjusted for the following

• Time Dial = duration the floodlight stays on once movement
is detected and Lux Level is met, from 10 seconds to upto
8 minutes.

• Lux Dial = controls when the PIR will detect movement.
Ambient light level must be below the set level, for PIR to
operate and detect movement. Adjustable from 2 Lux to
2000 Lux.

Guardian Slimline LED Floodight - PIR

7. Once the PIR has been initially set, check all fixings and

electrical connections and when safe, reinstate the power.

Note - During the first 48 hours of operation, the PIR may
cause the LED floodlight to operate as it self adjusts to the
ambient light level of the installation.

PART CODE: LFSP10W1B30 / LFSP10W1B50 /
LFSP20W1B30 / LFSP20W1B50 / LFSP30W1B30 /
LFSP30W1B50 / LFSP50W1B30 / LFSP50W1B50

For pole or post top
mounting:

Ensure longer bracket
(fitted) is used

For wall mounting:

Use shorter bracket
provided

Wattage Height Suggested Halogen Equivalent

10 2.0m - 3.0m 100W
20 2.5m - 4.0m 200W
30 3.0m - 5.0m 300W

50 4.0m - 6.0m 500W

FIXING HERE

FIXING
HERE

TIME LUX

MIN MAX MIN

Installation & Operating Instructions

NOTE – To comply with regulations, Installation must be carried out by suitably

qualified competent person and in accordance with the current IEE Wiring
Regulations (BS7671) and Building Regulations. A copy of the instructions must
be left for the user/Maintenance engineer for future reference.

For Non-UK, Please refer/consult local requirements

ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/
ISOLATED BEFORE COMMENCING INSTALLATION

Tech Help Line

UK -

0330 024 9279

Non UK -

[phone]

Visit our website at

Luceco is a registered trade mark of Nexus Industries Ltd.

Supplied by

LUCECO

Stafford Park 1 TF3 3BD ENGLAND

www.luceco.uk

LFSPV1MB03.16

OVERRIDE FACILITY - the PIR sensor is equipped with this function. It allows the PIR sensor to operate in Dusk till Dawn mode.
However it will only activate depending on ambient light level set on the PIR.

To initiate Override Facility turn the power supply OFF/ON/OFF/ON within 2 seconds.

To turn Override Facility OFF, turn the power off for a minimum of 5 seconds, this will reset back to full automatic PIR detection.

Technical Specs

Product Code

Wattage

Lumen

output

Efficacy

Llm/W

CCT Voltage

Power

factor

LFSP10W1B30

10 600 60 3000 220-240V 50Hz >0.8

LFSP10W1B50

10 600 60 5000 220-240V 50Hz >0.8

LFSP20W1B30

20 1200 60 3000 220-240V 50Hz >0.9

LFSP20W1B50

20 1200 60 5000 220-240V 50Hz >0.9

LFSP30W1B30

30 1800 60 3000 220-240V 50Hz >0.9

LFSP30W1B50

30 1800 60 5000 220-240V 50Hz >0.9

LFSP50W1B30

50 3000 60 3000 220-240V 50Hz >0.9

LFSP50W1B50

50 3000 60 5000 220-240V 50Hz >0.9

Lighting detection diagrams

10W

Floodlight beam angle (95°)
and light distribution

PIR beam angle (120°)
and range

Note: Based on a recommend 45° downward tilt angle

20W 30W 50W

Installation & Operating Instructions

Environmental Protection W.E.E.E (Wheelie Bin Symbol for EU ONLY)

This symbol is known as the “crossed-out” wheelie Bin Symbol”. When this symbol is marked on a product or battery, It means that it should not be disposed of
with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment.
Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within.
Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.

United Kingdom Guarantee

For other territories and for further information, please see www.luceco.uk for details

Products are protected by guarantee for a period of 3 year guarantee, from date of purchase against defects in material and workmanship (unless otherwise stated).
Should a product fail to perform as described within the guarantee period it will be repaired or replaced with the same or equivalent product by Luceco, free of
charge provided that you: (1) return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return
authorization number.
Repaired or replaced products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If in
our sole discretion, we are unable to repair or replace a defective product, we will refund the purchase price of the product.
This guarantee will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident, abuse or misuse, or if it has been used in a
manner not conforming to our product instructions, has been modified in any way, or has any serial number removed or defaced. Repair or attempted repair will void
this guarantee. Our maximum liability under the terms of this guarantee is limited to the purchase price of the product covered by the guarantee.
The guarantee is given under English Law. If any part of this guarantee is deemed unenforceable (including any provision in which we exclude our liability to you) the
enforceability of any other parts of the guarantee will not be affected. These terms do not reduce your statutory rights.
For Non-UK please contact Local Luceco Office for details. THESE TERMS AND CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Eventually, you may want to replace this fitting;