LCTV- 2201A
TFT-LCD Monitor
Owner's Guide to Operation
CONTENTS
LCTV-2201A
COLOR TFT- LCD TV Monitor
OPERATION MANUAL
SAFETY PRECAUTIONS
SUPPLIED ACCESSORIES
PREPARATION
Remote Control
Cable Connection
LOCATION OF USERS CONTROL
BASIC OPERATION
Monitor Installation
OSD USAGE
Basic OSD usage
………………………6
……………3,4
……………5
……………………7
……………………9
……………10,11,12
…………………13
……8
Basic Setup
PC Setup
Video Setup
TV Setup
……………………………………18
PIP
Zoom
OSD Setup
Before Calling for repair service
SPECIFICATIONS
LCTV-2201A
Available PC VGA Mode
…………………………………19
…………………………14
……………………………15
…………………………16
……………………………17
…………………………20
…………………………22
……………23
……21
SAFETY PRECAUTIONS
Improper use can result in electric shock and/or fire. In order to prevent potential danger,
please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your color TFT-LCD TV
monitor product, please read the following precautions carefully before using the product.
Ŋ All operating instructions must be read and understood before the product is operated.
Ŋ These safety and operating instructions must be kept in safe place for future reference.
Ŋ All warnings on the product and in the instructions must be observed closely.
Ŋ All operating instructions must be followed.
Ŋ Do not use attachments not recommended by the manufacturer. Use of inadequate attachments
can result in accidents.
Ŋ This product must be operated on a power source specified on the specification label. If you are
not sure of the type of power supply used in your home, consult your dealer or local power
company. For units designed to operate on batteries or another power source, refer to the
operating instructions.
Ŋ The power cords must be routed properly to prevent people from stepping on them or objects
from resting on them. Check the cords at the plugs and product.
Ŋ If you plan to use a 12V DC power supply unit other than the AC adapter supplied with the
product, make sure the pow er supply unit provides stable voltage with minimum fluct u atio ns.
Ŋ Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
Ŋ Never insert an object into the product through vents or openings. High voltage flows in the
product, and inserting an object can cau se ele ctri c shock and/or short internal parts. For the
same reason, do not spill water or liquid on the product.
Ŋ Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other dangerous conditions. Request a qualified service person to perform servicing.
Ŋ If any of the following conditions occurs, unplug the power cord from the AC outlet, and request
a qualified service person to perform repairs.
a. When the power cord or plug in damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as describedin the operating instructions.
Do not touch the controls other than those described in the operating instructions.
Improper adjustment of controls not described in the instructions can cause damage,
which often requires extensive adjustment work by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the
product indicates that the product needs servicing.
Ŋ In case the product needs replacement parts, make sure that the service person uses placement
parts specified by the manufacturer, or those with the same characteristics and performance as
the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
Ŋ Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
Ŋ When mounting the product on a wall or ceiling, be sure to install the product according to the
method recommended by the manufacturer.
3
SAFETY PRECAUTIONS(Continued)
Ŋ Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to
clean the product. Do not use liquid cleaners or aerosol cleaners.
Ŋ Unplug the power cord from the AC outlet if you do not use the product for considerably long
time.
Ŋ Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.
Ŋ Keep the product away from direct rays of the Sun-light.
Ŋ Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow
the manufacturer's instruction. Use only the mounting hardware recommended by the
manufacturer.
Ŋ When relocating the product placed on a cart, it must be moved with the utmost care. Sudden
stops, excessive force and uneven floor surface can cause the product to fall from the cart.
Ŋ The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation cancause overheating and/or shorten
the life of the product. Do not place the product on a bed, sofa, rug or other similar surface,
since they can block ventilation openings. This product is not designed for built-in installation;
do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
Ŋ The LCD panel used in this product is made of glass. Therefore, it can break when the product
is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case
the LCD panel breaks.
Ŋ Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
Ŋ The LCD Panel is a very high technology product with 4,915,200 thin film transistors, giving you
fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of blue, green or red. Please note that this does not affect the performance of your
product.
4
SUPPLIED ACCESSORIES
Make sure the following accessories are provided with the product.
LCTV-2201A
TFT-LCD Monitor
TM390 ... XGA
Owner's Guide to Operation
TM400 ... SXGA
Operation Manual (x1) Monitor Driver Diskette (x1)
Size AAA Battery (x2)
AC Adapter (x1)
Remote Control (x1)
PC VGA Cable (x1)
PC Stereo Cable (x1) Video Sound Cable (x1)
Option
Wall Mount Bracket (x1) Screws (x4)
Wall Mount Latch(x1)
AC Cord (x1)
Option
Composite Video Cable (x1)
S-Video Cable (x1)
5
PREPARATION
Ŋ Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent proper operation.
!
Cautions regarding use of remote control
Ŋ Do not expose the remote control to shock. In addition, do not expose the remote control to
liquids, and do not place in an area with high humidity.
Ŋ Do not install or place the remote control under direct sunlight. The heat may cause deformation
of the unit.
Ŋ The remote control may not work properly if the remote sensor window of the main unit is under
direct sunlight or strong lighting. In such case, change the angle of the lighting or LCD TV
monitor set, or operate the remote control closer to the remote sensor window.
Batteries for Remote Control
If the remote control fails to operate LCD TV Monitor functions, replace the batteries in the remote
control.
1 Open the battery cover.
2 Insert batteries (two Size-AAA batteries, Supplied with product).
Remote Control
Ŋ Place batteries with their terminals corresponding to the (+) and (-) indications in the
battery compartment.
3 Close the battery cover
!
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow
the instructions below.
• Place batteries with their terminals corresponding to the (+) and (-) indications.
• Different types of batteries have different characteristics. Donot mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batter ie s to leak che mi cals.
• Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can
cause a rash. If chemical leakage is found, wipe with a cloth.
• The batteries supplied with the product may have a shorter lifeexpectancy due to storage
conditions.
• If the remote control is not used for an extended period of time remove batteries from the
remote control
6
PREPARATION(Continued)
Rear view of main unit
Cable Connection
Power input (DC 15V)
S-VIDEO
VIDEO
ANALOG RGB (PC)
TV Antenna
Sound out
PC SOUND
VIDEO SOUND
7
LOCATION OF USERS CONTROL
Control Panel (C/P) on the front of main unit
Remote control (R/C)
Power
Channel select
Auto Program
Menu
Select item
Sound mute
Press - Stops sound
Press again -
Returns sound to
previous level.
Signal source select
Menu Source őőőő CH ŏ
Menu
Signal source select
Channel up / Move up
Channel down / Move down
Decrease volume
Increase volume
ŏő
ő VOL ŏ
ŏŏ
ŏ
őő
ŏŏ
Power
Power Indicator
Press to select channels over 99
- Channel number 100 ~ 125
Channel Add / Erase
Press - Memory current channel
Press again - Erase current channel
Exit - Exit the OSD menu or move
to previous menu.
Ch (ŏ
ŏ)/(őőőő)
ŏŏ
Selects next higher channel.
ŏ
őSelects next lower channel.
Display
Press - Display receiving channel
number at TV mode or signal
source name at another mode.
Press again - Removes displayed
channel number.
Vol (ŏ
ŏ)/(őőőő)
ŏŏ
Increase volume (up)
ŏ
ő Decrease volume (down)
8
BASIC OPERATION
POWER On / Off / Standby
Power Indicator
Power
Available Mode ŊŊŊŊ Yes / ŋŋŋŋ No
Ŋ
Ŋ PC ŊŊŊŊ Video ŊŊŊŊ S-Video ŊŊŊŊ TV
ŊŊ
Ŋ
Ŋ by Control Panel (C/P)
ŊŊ
1 Press the Power button to turn on the main unit.
2 The power indicator lights green.
3 Press again the Power button to turn off.
Ŋ
Ŋ by Remote Control (R/C)
ŊŊ
1 Press the Power button to turn on the main unit.
2 Power indicator changes from red to green.
3 Press again the Power button then the power
indicator changes from green to red and main
unit turns into standby mode.
Note:
After power failure, press source button of C/P to restore display
or press the power button of R/C
Switching PC / TV / VIDEO / S-VIDEO Mode
Remote Control (R/C)
1 Press the PC/TV to
select TV mode.
Press the
again to select PC
mode.
PC/TV
2 Press the Video to
select composite
video mode.
3 Press the S-Video
to select separate
video mode.
S-Video
Video
Control Panel (C/P)
1 Press the Source to
display OSD menu for
source select.
2 Press the Chŏ
the cursor to the desired
selected source.
ŏ/őőőő to move
ŏŏ
3 Press the Menu to select
the
source.
4 If you don't want to change
source, select
current source
Exit or
.
PC/TV
9
Monitor Installation
Available Mode ŊŊŊŊ Yes / ŋŋŋŋ No
Ŋ
Ŋ PC ŋŋŋŋ Video ŋŋŋŋ S-Video ŋŋŋŋ TV
ŊŊ
1 Double click [Control Panel ] icon
from [My Computer] folder
.
3 Select [Settings] in [Display Properties]
window.
4 Click [Advanced...].
2 Double click [Display] i con from
[Control Panel] folder.
5 Select [Monitor] in the window shown
above.
6 Set [Refresh Frequency:] at 60Hz.
7 Finally, click [Properties].
10
Monitor Installation(Continued)
Available Mode ■ Yes / □ No
■ PC □ Video □ S-Video □ TV
8 Select [Driver] and then click [Update
Driver...]
.
10 Click [Have Disk...]. 11 Select drive [A:
9 [Upgrade Device Driver Wizard] will be
appeared. Choose the
then click [Next>].
].
second list and
11
Monitor Installation(Continued)
Available Mode ■ Yes / □ No
■ PC □ Video □ S-Video □ TV
12 Select the file of
NEWCOMMMONITOR.inf.
SOSA TM800
14 Click [Next>]to start installing the
selected monitor.
13 Choose SOSA TM800 and then cli c k
[Next>].
SOSA TM800
15 Click [Finish].
(Be sure the screen shows you correct
model name.)
12
BASIC OSD USAGE
Main Menu Screen
1 Press the Menu of R/C or C/P to display the OSD menu screen.
2 Press the Chŏ
3 Press the Sel of R/C or Menuof C/P to select the menu icon.
4 Press the Exit of R/C or select the Exit of OSD menu to disappear the main menu screen.
Note:
Sub Menu Screen
ŏ/őőőő of R/C or C/P to move the cursor to desired menu icon.
ŏŏ
R/C - Remote Control & C/P - Control Panel
Remote Control (R/C) usage
1 Press the Chŏ
to the desired adjustment item.
2 Press the Volŏ
ŏ/őőőő to move the cursor
ŏŏ
ŏ/őőőő for adjustment.
ŏŏ
3 To adjust another item, press the
Chŏ
ŏ/őőőő to move the cursor to another
ŏŏ
desired adjustment items.
4 Press the Exit of R/C or OSD menu to
move previous menu scree n.
Note:
For more detail information of sub-menu and function
of main menu items, please refer to page 14~20.
Control Panel (C/P) usage
1 Press the Chŏ
to the desired adjustment item.
2 Press the Menu to select the item then
press the
3 To adjust another item, press the Menu
then press the Chŏŏŏŏ/őőőő to move the cursor
to another desired adjustment item s.
4 Select the Exit of OSD menu to move
previous menu screen.
Status Infomation
In case of TV / Video / S-Video Mode
ŏ/őőőő to move the cursor
ŏŏ
Chŏ
ŏ/őőőő for adjustment.
ŏŏ
In case of PC Mode
Video Setup
Menu name
Video Setup and TV Setup will not be
available in PC Mode.
sign will be appeared.
Video Info :
NTSC
NTSC 4.43
Color system
"Not Available"
PAL SECAM
Video Setup
Not Available
Numbers of horizontal pixel
Numbers of vertical line
Horizontal frequency
Refresh rate
Resolution : 1024 768
Frequency : 56KHz 70Hz
13
Basic Setup
Available Mode ŊŊŊŊ Yes / ŋŋŋŋ No
Ŋ
Ŋ PC ŊŊŊŊ Video ŊŊŊŊ S-Video ŊŊŊŊ TV
ŊŊ
Selected item
Brightness
Color
RESET
Press the Volőőőő of R/C
or press the
Decrease brightness Decrease brightness
Decrease contrast Increase contrastContrast
Chő
ő of C/P
őő
Cold Medium HotBluish Reddish
Press the
or press the
Volŏ
ŏ of R/C
ŏŏ
Chŏ
ŏ of C/P
ŏŏ
1 Press the Sel of R/C or Menu
of C/P to select the RESET.
2 Press the Volŏ
press the Chŏ
the cursor to the
ŏ/őőőő of R/C or
ŏŏ
ŏ/őőőő of C/P to move
ŏŏ
Yes or No.
3 Select Yes, all data set to factory
default and select
are canceled
!
Warning
If you select "Yes", you will lose all current data settings.
Especially saved all the
No the command
TV channel will be lose.
14
PC Setup
Available Mode Ŋ
Ŋ
Ŋ PC ŋŋŋŋ Video ŋŋŋŋ S-Video ŋŋŋŋ TV
ŊŊ
Ŋ Yes / ŋŋŋŋ No
ŊŊ
Selected item
Auto Adj ust
Frequency Increase horizontal size
Press the Volőőőő of R/C
or press the
Ŋ
Ŋ Press the Sel of R/C or Menu of C/P then progress adjustment
ŊŊ
automatically
Ŋ
Ŋ Automatically adjusted items are bellow
ŊŊ
1) Frequency
2) Phase
3) H-position of PC Setup
4) V-Position of PC Setup
5) Canceling Speaker Mute
6) Turning a zoomed picture into its normal shape (100%)
Note:
Hot key to auto adjust : Press
Decrease horizontal size
!
Caution
Take this option just in the case of having horizontally unmatched picture
after operating the "Auto Adjust".
Chő
ő of C/P
őő
Chŏ
ŏ and Chőőőő of C/P simultaneously.
ŏŏ
Press the
or press the
Volŏ
ŏ of R/C
ŏŏ
Chŏ
ŏ of C/P
ŏŏ
Phase
Ŋ
Ŋ When noise remains on the screen after operating the "Auto Adjust",
ŊŊ
Volŏ
adjust it by selecting
!
Caution
Do not make manual adjustment when the picture is in its normal shape or
you will create problem on it..
Move downV-Position Move up
ŏ/őőőő of R/C or Chŏ
ŏŏ
ŏ/őőőő of C/P.
ŏŏ
Video
Video
Move leftH-Position Move right
ideo Vide
15
Video Setup
Available Mode Ŋ
ŋ
ŋ PC ŊŊŊŊ Video ŊŊŊŊ S-Video ŊŊŊŊ TV
ŋŋ
Ŋ Yes / ŋ
ŊŊ
ŋ No
ŋŋ
Selected item
Saturation
Scaling
Press the Volőőőő of R/C
or press the
Lower color intensity Higher color intensity
Toward green Toward purpleHue
Fill ...... The screen takes the source of 4:3 or 16:9 aspect ratio as its
Aspect Ratio ...... They are the same aspect ratio with that of Source.
Source screen Fill
Chő
ő of C/P
őő
full-sized regular picture.
4:3 Ratio 16:10 Ratio
Press the
or press the
Volŏ
ŏ of R/C
ŏŏ
Chŏ
ŏ of C/P
ŏŏ
Aspec t Rati o
4:3 Ratio
16:9 Ratio
Video Type DVD
Image Rotation Normal ...... Normal screen
Rotation ...... Picture will be turned 270 to the clockwise rotation.
: Choose this when the external input device is DVD
VCR
: Choose this when the external input device is VCR
Normal Rotation
16
16:10 Ratio
16:9 Ratio
TV Setup
Available Mode ŊŊŊŊ Yes / ŋŋŋŋ No
ŋ
ŋ PC ŋŋŋŋ Video ŋŋŋŋ S-Video ŊŊŊŊ TV
ŋŋ
Selected item
Channel system
Press the Volőőőő of R/C
or press the
Chő
ő of C/P
őő
Press the
or press the
1 Press Sel of the R/C or Menu of C/P to display below menu.
US Air
US Cable
Japan Air
Japan Cable
2 Press Chŏ
ŏ/őőőő of R/C or C/P
ŏŏ
to move cursor to required
channel system, then press
Sel of the R/C or Menu of
C/P for select.
OR
2 Press CH. Search of the R/C
and select
AUTO PROGRAM
Auto Program.
NO YES
3 Press Volŏ
of C/P and move the cursor to
Yes or No.
ŏ/őőőő of R/C or Chŏŏŏŏ/ő
ŏŏ
ő
őő
Please select "YES" for Auto Progr am
4 Press Yes for Auto Program for TV channels
5 Press No to move to previous menu.
Volŏ
ŏ of R/C
ŏŏ
Chŏ
ŏ of C/P
ŏŏ
Channel
Edit
Notice:
To stop
This will bring the previous channel until before you press
Auto Program, please press Exit key of R/C.
Exit key and only memories the programmed channels.
!
Caution
Ŋ
Ŋ Please check the antenna cable has been connected.
ŊŊ
1 Press Sel of R/C or Menu of C/P and select Channel Edit.
2 Press Chŏ
Add or Erase.
ŏ/őőőő of R/C or C/P and move the cursor to
ŏŏ
3 Select YES, the current channel will be erased.
4 select NO, move to previous menu.
OR
1 Press Add/Erase of R/C, Channel Add and Channel Erase will be
constantly functioned.
17
PIP
Available Mode ŊŊŊŊ Yes / ŋŋŋŋ No
Ŋ
Ŋ PC ŋŋŋŋ Video ŋŋŋŋ S-Video ŋŋŋŋ TV
ŊŊ
Selected item
PIP
Source
H-Position
V-Position
Press the Volőőőő of R/C
or press the
Ŋ
Ŋ PIP function is only available in PC mode.
ŊŊ
Ŋ
Ŋ PIP signal source selection.
ŊŊ
Ch
of C/P
Off On
TV Video S-Video
Volŏ
Press the
or press the
move right the PIP windowmove left the PIP window
ŏ of R/C
ŏŏ
Chŏ
ŏ of C/P
ŏŏ
ŋŋŋŋŋŋŋŋ
move up the PIP windowmove down the PIP window
ŋŋŋŋ
18
ŋŋŋŋ
Ŋ
TV Channel
Volume Decrease sound Increase sound
Ŋ TV Channel change.
ŊŊ
Press
Chŏ
ŏ /Chőőőő of R/C or C/P to select desired channel.
ŏŏ
Ŋ
Ŋ Volume adjustment of the PIP window.
ŊŊ
ZOOM
Available Mode ŊŊŊŊ Yes / ŋŋŋŋ No
Ŋ
Ŋ PC ŊŊŊŊ Video ŊŊŊŊ S-Video ŊŊŊŊ TV
ŊŊ
Selected item
Zoom
V-Pan Ŋ Move the zoom window up and down while operating the Zoom.
Press the Volőőőő of R/C
or press the
Zoom out Zoom in
Chő
ő of C/P
őő
Original screen
A
Press the
or press the
Zoom screen
A
move up the zoom windowmove down the zoom window
A
A
H-Pan Ŋ Move the zoom window sideways while operating the Zoom.
Volŏ
ŏ of R/C
ŏŏ
Chŏ
ŏ of C/P
ŏŏ
move right the zoom windowmove left the zoom window
A A
19
OSD Setup
Available Mode ŊŊŊŊ Yes / ŋŋŋŋ No
Ŋ
Ŋ PC ŊŊŊŊ Video ŊŊŊŊ S-Video ŊŊŊŊ TV
ŊŊ
Selected item
Language
H-Position
V-Position
Press the Volőőőő of R/C
or press the
Chő
ő of C/P
őő
Press the
or press the
Volŏ
ŏ of R/C
ŏŏ
Chŏ
ŏ of C/P
ŏŏ
1 Press the Sel of R/C or Menuof C/P to select the Language.
Then appears language select menu screen.
2 Press the Volŏ
the cursor to the
ŏ/őőőő of R/C or press the Chŏŏŏŏ/őőőő of C/P to move
ŏŏ
English or Korean.
3 Press the Sel of R/C or Menuof C/P to select the desired language.
Then press
Exit to move to previous menu screen.
move right the OSD menu boxmove left the OSD menu box
ŊŊŊŊŊŊŊŊ
move up the OSD menu boxmove down the OSD menu box
ŊŊŊŊ
20
ŊŊŊŊ
Background OpaqueTranslucent
Duration Time
Ŋ The range of controlling the duration time of the OSD menu is from
5 sec. up to 50 sec. Default setting is 10 sec.
Before calling for repair service...
Ŋ
Ŋ Before calling for repair service, check the following items for possible remedies to the
ŊŊ
encountered symptoms.
Problem Check below
There is no
picture or sound
(TV,Video,PC).
There is no
sound (TV,Video
PC).
There is no
picture or sound,
just noise(TV).
Picture is not
clear (TV).
Picture is not
clear (PC).
• Make sure the AC adapter is properly inserted in the
power outlet.
• Make sure the main power button of the main unit is on.
• Make sure the signal cable is free of connections.
• Make sure whether the power of an external input device
is on.
• Make sure the input mode is set to proper mode.
• Fluorescent lamp may have reached the end of service life.
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure the sound cable is free of connections.
• Make sure the antenna cable is properly connected.
• Bad reception can be considered.
• Make sure the antenna cable is properly connected.
• Bad reception can be considered.
• Operate the Auto Adjust.
• Reset the Frequency and the Phase.
Reference
Pages
7
9
7
9
22
8
8
7
7
-
7
-
15
15
The picture is not
clear (Video).
The picture is not
sharp (TV).
The picture is
doubled or tripled
(TV).
There are stripes
on the screen or
color fade.
• Check whether the Video Type is set up in the Video Setup
menu.
• The reception may be weak.
• The state of broadcast may also be bad.
• Make sure the outside antenna is not connected.
• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from mountains
or buildings.
• Check this unit receiving interference from other devices.
Transmission antennas of radio broadcasting stations and
transmission antennas of amateur radios and cellular
phones may also cause interference.
• Use the unit as far apart as possible from devices that may
cause possible interference.
16
21
SPECIFICATIONS
Color TFT-LCD TV Monitor
(Anlog RGB)
1600 * 1024, WSXGAResolution
16,777,216 ColorsStandard ColorColor
Full ColorMax, color (Dithering)
200 cd/m
25,000 hoursLamp life
300 : 1 Contrast Ratio
H : 140 V : 140Viewing Angle
Amorphous Si TFT-LCDTypePanel
470.4 * 301.1mmActual Display Size
22.0, 558.8mmDiagonal Length
30~80 KHzH-FrequencyPC Signal
43~75 HzV-Frequency
0.7Vp-pSignal Level
Composite / S-VIDEO / CVBSInput SignalVideo / TV
PAL / NTSCColor Signal Type
B/G , I , D/K , MSound Signal Type
AC100~240V, 50/60Hz, DC15VPower Voltage
Typ. 60WattStandardPower Consumption
Max. 5 WattPower Save Mode
2 Watt x 2 Speaker
587 x 475 x 75 mmW*H*D mmSize
18Kg w/o accessoriesWeight
LCTV-2201A
2
(nit)Brightness
22
SPECIFICATIONS
VGA Input Signal
Available PC VGA Mode
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 1024
V-Frequency
(Hz)
60
72
75
56
60
72
75
60
70
75
H-Frequency
(KHz)
37.9
37.9
37.9
31.5
37.9
37.5
35.1
37.9
48.1
46.9
48.4
56.5
60.0
Pixel Rate
(MHz)
31.50085640 x 350
31.50085640 x 400 DOS
35.50085720 x 400
25.175
31.500
31.500
36.000
40.000
50.000
49.500
44.90035.543
65.000
75.000
78.750
162.00075.0601600 x 1200
Standard
Type
VESA Standard
VESA Standard
VESA Standard
Industry Standard
VESA Standard
VESA Standard
VESA Guidelines
VESA Guidelines
VESA Standard
VESA Standard
Industry Standard
VESA Guidelines
VESA Standard
VESA Standard
VESA Standard108.00067.5751152 x 864
VESA Standard108.00060.0601280 x 960
VESA Standard108.00064.060
VESA Standard135.00080.075
VESA Standard
Remark
VGA
SVGA
XGA
-
SXGA
UXGA
23
Loading...