LUCCI AIRFUSION TURBO III Installation Instructions Manual

V1.0 p u b l i c a t i o n o n 0 5 . 2 0 1 6

LUCCI

AIRFUSION TURBO III

WALL / CEILING FAN

INSTALLATION
OPERATION
MAINTENANCE
WARRANTY INFORMATION

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

Airfusion Turbo III Installation Instructions

1 | P a g e

CONGRATULATIONS ON YOUR PURCHASE

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read all instructions
before using the product & keep all instructions for future reference.

SAFETY PRECAUTIONS

1. In Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and
maintenance shall not be undertaken by children without supervision.

2. In Australia: The appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.

3. Children should be supervised to ensure that they do not play with the appliance.

4. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available. If electrical appliances

are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being.

5. To reduce the risk of electric shock, do not use this fan with any solid-state speed control device.

6. Do not operate any product with a damaged cord or plug, after the product malfunctions, is dropped or appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

7. Never install the unit where it could be subject to:

- Heat sources such as radiators, heat registers, stoves or other heat producing products

- Direct sunlight

- Excessive dust

- Mechanical vibration or shock

- Lack of ventilation such as bookcases or cabinets and uneven surfaces.

8. Switch off and unplug from outlet when not in use, before assembling or disassembling parts and before cleaning.
Fully assemble the fan before switching on.

9. Avoid contact with moving parts. Do not insert any object through the grill when the fan is operating.

10. Do not cover the grill, or operate in close proximity to curtains, etc.

11. This fan is suitable for indoor and alfresco areas provided the fan is fully undercover with a minimum of 2 walls. The
ceiling fan must be positioned in a location protected from water, wind, dust and salt. Exposure to these elements
will void the warranty. Mounting the fan in a situation where it is subject to water or moisture is dangerous.

12. Must be installed by a licensed electrician.

Airfusion Turbo III Installation Instructions

2 | P a g e

PARTS LIST

Unpack your ceiling fan carefully. Examine all parts. You should have the following:

1

Front guard

12

Screw

2

Screw

13

Bracket cover

3

Blade

14

Fan surround

4

Motor

15

Mounting stand

5

Bolt

16

Tilt adjusting knob

6

Washer

17

Power supply cord

7

Spring washer

18

Control box

8

Nut

19

Pull cord switch

9

Mounting bracket

20

Rear guard

10

Bolt

21

Nut

11

Fixing bracket

22

Screw

Fig. 1

Airfusion Turbo III Installation Instructions

3 | P a g e

INSTALLING THE FAN

TOOLS REQUIRED:

- Phillips / Flat head screwdriver

- Pair of pliers

- Adjustable spanner

- Step ladder

- Wire cutter

- Wiring, supply cable as required by local provincial and national wiring codes and regulations.

INSTALLING THE FAN

STEP 1

Loosen the mounting bracket (9) from the fixing bracket (11). Fig.1

STEP 2

Use the mounting bracket as a template (9) to mark the position of the holes onto the wall /
ceiling. Drilll holes into the wall / ceiling. Secure the mounting bracket onto the wall / ceiling
with the bolts (10). Ensure the bolts used are suitable for the mounting surface. Fig. 1

Note: Must be mounted to solid surfaces such as concrete or timber joist/beam, which can
hold up to 4 times the weight of the fan (approximately 50kg).

STEP 3

• Install the screws (12) into position onto the mounting bracket (9).

• Locate the mounting stand (15) into the mounting bracket then fit the fixing bracket (11)

using the keyholes in the fixing bracket (11).

• Align the brackets and tighten the screws as shown to hold the mounting stand (15)

securely in place.

• Install bolts (5) with washers (6 & 7) through the mounting stand (15) and the fixing

bracket (11) securely. Fig.1

STEP 4

Push the clip on the bracket cover (13) over the fan fixing bracket (11) and mounting
bracket (9) by hand. Fig. 1

Airfusion Turbo III Installation Instructions

4 | P a g e

STEP 5

Secure the power supply cord to the mounting stand (15) by using a cable tie to prevent
the power supply cord from being caught in the moving parts of the fan. Fig. 1

STEP 6

To adjust the postion of the fan, loosen the tilt adjusting knobs (16) by few threads and
push the fan surround (14) lightly to the desired position. Secure the fan by tightening the
tilt adjusting knobs. Fig. 1

STEP 7

Connect the power plug to the socket on the wall or on the ceiling.

USING YOUR CEILING FAN

FAN SPEED CONTROL

The fan has 3 different speeds which are controlled by the speed pull cord
switch

1. High speed

2. Medium speed

3. Low speed

4. OFF

FAN SWING CONTROL

The oscillation of the fan is controlled by the Oscillation pull cord switch

1. Oscillate On- fan will oscillate from left to right

2. Oscillate Off- fan will remain in one position

AFTER INSTALLATION

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency

Fan Speed
Pull switch

(front)

Oscillation

Pull switch

(rear)

Airfusion Turbo III Installation Instructions

5 | P a g e

signals superimposed in the electricity for off-peak hot water control, may cause a change in fan motor noise. This is
normal. Please allow a 24-hour “breaking-in” period, most noises associated with a new fan disappear during this time.
All electric motors are audible to some extent. Please note that this is not a product fault, and as such is not covered
under warranty.

CARE AND CLEANING:

• Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to avoid
scratching the paint finish. Please turn off electricity power when you do so.

• Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility
of an electrical shock.

• The motor has a permanently lubricated ball bearing so there is no need to oil.

NOTE: Always turn OFF the power at the mains switch before attempting to clean your fan.

TECHNICAL INFORMATION

FAN models

Rated Voltage

Rated power (motor)

Speed control

TURBO III

220-240VAC

100W

3 speeds, pull chain
switch

Airfusion Turbo III Installation Instructions

6 | P a g e

WARRANTY INFORMATION

LUCCI CEILING FAN WARRANTY DETAIL

LUCCI WARRANTY HOTLINE- 1800 602 243

THIS WARRANTY IS VALID IN AUSTRALIA ONLY

In the event of service being required, please call the Lucci Fan Warranty Hotline on 1800 602 243 between 9am & 5pm (EST)
Monday to Friday. Please make sure you have all the ceiling fan details filled out at the end of the manual before making the call.

Every Lucci ceiling fan is thoroughly inspected and tested before being released for sale. In addition to any warranty
rights or conditions under statutory regulations, Lucci warrants all of its ceiling fans against defective workmanship and
faulty materials for twelve (12) months from the date of purchase. Lucci undertakes, at its option, to repair or replace,
free of charge, each product or part thereof on condition that;

1. The fan or relevant part has not been subjected to misuse, neglect, or been involved in an accident.

2. The repairs are not required as a result of normal wear and tear.

3. The product was installed by a licensed electrical contractor.

4. A copy of the original receipt of purchase is presented.

5. 12 month warranty applies when used in any non-domestic applications.

6. This warranty does not cover stains, scratch and scuff marks, or dents if the product is purchased through a
factory outlet or to refurbished items.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.

Lucci Design cannot be held responsible for any repair other than those carried out by it or one of its
Authorised Service Agents. Please keep this warranty information in a safe place. This information must be
produced in the event of service being required.

Distributed by:

Beacon Lighting
140 Fulton Drive
Derrimut, Victoria, 3030
Australia
Ph [phone]
Fax [phone]
Email: [e-mail]

Airfusion Turbo III Installation Instructions

7 | P a g e

CEILING FAN WARRANTY INFORMATION

LUCCI WARRANTY HOTLINE- 1800 602 243

Complete and retain this form for your personal records and warranty purposes.

NAME…………………………………………………………………………………
ADDRESS……………………………………………………………………………

……………………………………………………POSTCODE……………………

MODEL NUMBER……………………………………………………………………

(PO# + DATECODE Sticker here)

PO NUMBER or DATECODE ………………………………………………………
DATE OF PURCHASE………………………………………………………………

INSTALLING LICENSED ELECTRICAN……………………………………………

…………………………………………………………………………………………
LICENCE No…………………………………………………………………………

ATTACH PROOF OF PURCHASE HERE