Lucasey SM1909A, SM2411A Installation Instructions Manual

SM1909A INSTALLATION INSTRUCTIONS

SM1909A - Adhesive Furniture Mount

for Samsung Models LN32A450 & LN32B457C6HXZA

Page 1 of 2

3.9"

Rivets

T#2026

Bottom Plate

Adhesive Squares
with Plastic Liners

Determine the appropriate location on the furniture

1.
for the monitor. Mark the location for the mount.

Clean the furniture surface 2x with an alcohol wipe to

2.
remove any residue on the furniture surface.

Peel the Liner from the Adhesive Pads on the

3.
Bottom Plate. Avoid accidental contact between
the exposed adhesive and any objects.

Carefully line up the front edge of the Bottom Plate

4.
with the line marked in step 1. Make sure that the
front arrow is pointed towards the front of the
furniture.

Press the Bottom Plate down putting pressure on

5.
each of the Adhesive Pad locations.

Remove the Rubber Feet from the Samsung Base.

6.

Monitor Base Rubber Feet

SM1909A_Install (4/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com

Component List

1...

Top Plate

1...

Bottom Plate

4...

#8 x 5/8 Tapping Pin Head Security Screws - Black

4...

#8 x 1/2" Phillips Countersunk Screws - Silver

Protected under one or more of these U.S. Patent numbe r s: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5, 169,114 5,255,884 5,310,152 5,522,576 5, 621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1

SM1909A INSTALLATION INSTRUCTIONS

Page 2 of 2

#8 x 1/2 Countersunk
Screws - Silver

7.

Remove the existing countersunk screws from
the monitor base and attach the Top Plate to the
Monitor Base with the provided #8 x 1/2" Phillips
Countersunk Tapping Screws.

8.

Align the slots on the Top Plate Assembly with
the rivets on the Bottom Plate. Pull forward on
the Top Plate Assembly to lock the two plates
together.

9.

Attach the Samsung monitor to the Monitor Base
with the provided Pin Head Security Screws.
(Requires 5/32" Hey Key with Hole, sold separately
with SM1909K - Release Key)

Pin Head Security
Screws - Black

Top Plate Assembly with Base

Bottom Plate

Monitor Removal

Align the Release Key with the middle of the mount
and Slide the Release Key between the Top Plate
Assembly and the Bottom Plate.

SM1909A_Install (4/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com

SM1909K - Release Key

Once the Release Key is inserted all the way, the
top and bottom plates will release from each other.

Protected under one or more of these U.S. Patent numbe r s: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5, 169,114 5,255,884 5,310,152 5,522,576 5, 621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1