PCEC2410B INSTALLATION INSTRUCTIONS
PCEC2410B - Bolt Down Furniture Mount
for Philips Models: 37HFL5560, 42HFL5886 & 42HF7945
3-1/2"
Page 1 of 2
3/8"
1/8"
(10Pl.) Rivets
Glass Base
(6Pl.) Phillips Tapping Screws
Bottom Plate
1.
Determine the appropriate location on the furniture
for the monitor. Mark the front edge of the monitor's
glass base on the countertop Mark a parallel line
1/8" back from the previous line.
2.
Align the Bottom Plate with the second line and mark
each of the 6 screw hole locations.
3.
Drill each of the marked screw locations with a 1/16"
drill bit 3/4" deep.
4.
Attach the Bottom Plate with the provided Phillips Tapping
Screws
5.
Attach the Top Plate to the Glass Base using three
Socket Head Screws from the bottom of the base.
Component List
Socket Head Screws
(Provided with Monitor)
PCEC2410B_Install (8/08) ©2008 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
Top Plate
1 ...
Top Plate
1 ...
Bottom Plate
2 ...
Long Security Screws
4 ...
Short Security Screws
6 ...
Flat Washers
6 ...
#10 x 1/2" Philips Screws
Protected under one or more of the se U.S. Patent num b e r s: 3,291,432 3,559,942 3,724,798 D E S .270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5, 169, 114 5,255,884 5,310,152 5,522,576 5, 621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6, 060,661 6,102,398 6,158,704 6,454,116B 1 6,761,276B2 6,806,425B1
PCEC2410B INSTALLATION INSTRUCTIONS
A
DETAIL A
Glass Base
Page 2 of 2
Steel Yoke
6.
Attach the Steel Yoke to the swivel on the Glass
Base using the Short Security Screws and Flat
Washers. See Detail A.
Be careful not to damage the Glass Base while
attaching the Steel Yoke.
7.
Take the Top Assembly from Step 7 and align with
the rivets on the Bottom Plate. Slide the Top
Assembly forward until the Top and Bottom Plates
are locked together. Make sure all of the tabs on
the Top Assembly are engaged by pushing back and
forth to make sure Top Assembly is locked in place.
8.
This step requires two workers.
Hold the Steel Yoke so that it does not move and
lower the monitor onto the arms as indicated in
the monitor user manual. The curved edge of the
Steel Yoke faces the front.
Top Assembly
Bottom Plate
(4Pl.) Short Security Screws
(4Pl.) Washers
9.
Secure the monitor to the Steel Yoke by screwing
the two Long Security Screws with Washers
into the holes indicated in Detail B.
DETAIL B
(2Pl.) 5mm x 25mm Security Screws
(2Pl.) Washers
Holes for Steel Yoke
PCEC2410B_Install (8/08) ©2008 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
B
Protected under one or more of the se U.S. Patent num b e r s: 3,291,432 3,559,942 3,724,798 D E S .270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5, 169, 114 5,255,884 5,310,152 5,522,576 5, 621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6, 060,661 6,102,398 6,158,704 6,454,116B 1 6,761,276B2 6,806,425B1
Loading...