LG2309A INSTALLATION INSTRUCTIONS
LG2309A - Adhesive Furniture Mount
for LG Models 37LC5DC/DCB/DCS & 37LC50C
Page 1 of 2
0.4"
2.25"
(8Pl.) Rivets
(6Pl.) Adhesive Squares
(6Pl.) Removable Adhesive Liner
Bottom Plate
Determine the appropriate location on the furniture
1.
for the monitor. Mark the front edge of the monitor's
plastic base. Mark a parallel line 3/4" back from the
previous line.
Clean the furniture surface 2x with an alcohol wipe to
2.
remove any residue on the furniture surface.
Peel the Liner from the Adhesive Pads on the
3.
Bottom Plate. Avoid accidental contact between
the exposed adhesive and any objects.
Align the front edge of the Bottom Plate with the
4.
second line marked in step 1.
Press the Bottom Plate down putting pressure on
5.
each of the six Adhesive Pad locations.
Remove the rubber feet from the LG Monitor Base.
6.
LG2309A_Install (10/08) ©2008 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
(8Pl.) Rubber Feet
Adhered to Base
Component List
1...
Top Plate
1...
Bottom Plate
4...
Security Screws
4...
#10-32 x 1/2" Phillips Screws
Protected under one or more of th e se U.S. Patent num b e r s: 3,291,432 3,559,942 3,724, 798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973, 0 23 5,169,114 5,255,884 5,310,152 5,522 ,576 5,621,614 Re.35,677 DES .398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158, 704 6,454,116B1 6,761,276B2 6,806,425B1
LG2309A INSTALLATION INSTRUCTIONS
Top Plate
Page 2 of 2
(4Pl.) #10-32 x 1/2" Phillips
Machine Screws
Monitor Base
Top Plate Assembly
7.
Attach the Top Plate to the Monitor Base with
the provided #10-24 x 1/2" Phillips screws using
the tapped holes in the monitor base.
8.
Align the slots on the Top Plate Assembly with
the rivets on the Bottom Plate. Pull forward on
the Top Plate Assembly to lock the two plates
together.
9.
Attach the LG monitor to the Monitor Base with the
provided Security Screws.
(Requires Hey Key with Hole, sold separately
with LG2309K - Release Key)
Bottom Plate
Security Screws
(Requires Hex Key with hole
Sold Separately with LG2309K)
Monitor Removal
Align the Release Key with the middle of the mount
and Slide the Release Key between the Top Plate
Assembly and the Bottom Plate.
LG2309A_Install (10/08) ©2008 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
Once the Release Key is inserted all the way, the
top and bottom plates will release from each other.
Protected under one or more of th e se U.S. Patent num b e r s: 3,291,432 3,559,942 3,724, 798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973, 0 23 5,169,114 5,255,884 5,310,152 5,522 ,576 5,621,614 Re.35,677 DES .398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158, 704 6,454,116B1 6,761,276B2 6,806,425B1
Loading...