L.T.F. JH600B User Manual

JH600B Bluetooth Earphone

ID

Name

Count

User Guide

1. General Introduction

JH600B Bluetooth earphone mainly includes: the device of

Bluetooth earphone and the APP of "Westone Security VoIP" on mobile

telephone (hereinafter referred as "SecCall"). The device of Bluetooth

earphone uses the technology of hardware encryption to encrypt the

voice, and it also can transmit the voice safely with the APP in mobile

telephone which can make sure that users communicate with each other

safely.

Picture 1 Bluetooth earphone

2. Devices And Fittings

Chart1 Devices And Fittings

1

Bluetooth earphone

1

2

CD with software

1

3. Operational Process

(1) Install " SecCall"

Use computer to push the APK of "SecCall" which is loaded in the

CD to the mobile telephone, then click that APK to finish Installing the

"SecCall".

(2) Start " SecCall" And Log In

Start the " SecCall" on the phone, the APP interface will show as

picture 2:

Input the username, password and domain correctly, then click "Log

in":

Picture 2 "SecCall" Starting Interface

Picture 3 The interface of Log in

After logging in successfully, The interface will show as Picture 4:

Picture 4 First Starting without linking Bluetooth

(3) Starting Bluetooth Earphone

Starting the Bluetooth earphone by pressing the function key. If the

green light blinks 3 times and plays the tone of starting up correctly, that

means the Bluetooth earphone starts up correctly; If the red light blinks

once, that means failing to starting up because of low battery; in that

case user must charge at first.

(4) Bluetooth Earphone Link With App In The Phone

Find the name of Bluetooth earphone at "Me"->"Bluetooth" in

"SecCall", click it and the phone will start pairing that earphone. After

pairing successfully, the APP will quit the interface of "Bluetooth" and

the dialing interface will show as Picture 5:

Picture 5 Interface of Bluetooth

Attention: The "SecCall" must run on the phone when the

Bluetooth earphone is used while pairing the phone, if the "SecCall"

doesn’t run on the phone, the Bluetooth earphone can not be used

while pairing the phone.

(5) Dialing

Input the phone number of whom user wants to communicate with

and click the Dial key, then the green light of Bluetooth earphone will

blink every 2 sec.