Page 1
2. 4G Hz R F Re mo te
12 keys remote control.
RF 2.4GHz wireless signal.
Work with F4-3A/F4-5A/F4-CC wireless drivers to control LED fixtures.
EX series touch panel optional.
warranty
5 years
Main Characteristics
F1 F2 F3 F4
2.4GHz
Model
Remote Option
Working Voltage
Wireless Frequency
Working Temperature
Dimensions
Package Size
Weight(G.W.)
F1 F2 F3 F4
Dimming
3Vdc (Battery CR2032）
2.4GHz
-20℃~55℃
L145×W40×H12(mm)
L150×W46×H18(mm)
85g
Operating Instruction for Remote
Indicator light
On/Off
Brightness-
50
25
Brightness
75
100
shortcut key
Cancel delay off
On/Off
Brightness/Speed-
Color-/+
Red/Green/
G
R
B
Blue LED keys
Short press: turn on/off
Long press: change the
brightness
F1
Indicator light
Night light mode
Brightness+
Delay off
Scene keys
Short press: play
Long press: save
Mode Key
Brightness/Speed+
Saturation
Short press: on/off
Long press: adjust
Scene-mode keys
Short press: play
Long press: save
Color temperature
Mode
1. Static Red
2. Static Green
3. Static Blue
4. Static Yellow
5. Static Purple
6. Static Cyan
7. Static White
8.. RGB jumping
9. 7 Colors jumping
10. RGB smooth
11. 7 Colors smooth
RGB
On/Off
Brightness-
CT-/+
Sunrise
Sunset
On/Off
Brightness/Speed-
Color-/+
Indicator light
F2
Indicator light
RGBW
Delay off
Brightness+
Daylight
Night-light
Scene keys
Short press: play
Long press: save
Mode Key
Brightness/Speed+
B
G
R
Red/Green/Blue/
White LED keys
Short press: turn on/off
Long press: change the
brightness
Scene-mode keys
Short press: play
Long press: save
Mode
1. Static Red
2. Static Green
3. Static Blue
4. Static Yellow
5. Static Purple
6. Static Cyan
7. Static White
8.. RGB jumping
9. 7 Colors jumping
10. RGB smooth
11. 7 Colors smooth
12. Static Black
(only turn off RGB)
F3
1
F4
www. ltech -led .com
Page 2
2.4GHz
Wiring Diagram
CV Power Supply CV Power Supply CV Power Supply
5-24Vdc 5-24Vdc 5-24Vdc
Wireless Driver
Wireless Driver
Wireless Driver
Dimensions
40
Unit：mm
12
43
Remote
145
65
89
Holder
Remote
Touch panel
R
GBW
R
GBW
Strip Strip Strip
R
GBW
F series remote can control wireless driver directly, please refer to the manual of wireless driver for match code method.
F series remote can work with EX series touch panel, please refer to the manual of touch panel for match code method.
Match/Clear code between remotes
1. 2.
Assuming that B match up with A. Short press the
bottom t wo keys of B simultaneously, the indicator
light kee ps on after release.
B
A
Then press any key on A in 5 seconds. When the
indicator light of B turns off, m atch successfully.
Clear code
Press the bottom two keys of remote simultaneously (about 10 seconds) until the indicator light keeps on,
deactivated the matching successfully.
17
B
A
Update time: 2018.11.09_A0
2
www. ltech -led .com
Loading...