Page 1
Ma ualn
www. ltech onl ine.c om
(CT)
Technical Specs
Color Temperature Touch Panel
EX2
Input Voltage:
Output Signal:
Working Temp.:
F4-3A
CV Receiver
Input Voltage:
Max Current Load:
Max Output Power:
Wireless Signal:
F4-5A
CV Receiver
Input Voltage:
Max Current Load:
Max Output Power:
Wireless Signal:
F4-CC
CC Receiver
Input Voltage:
Output Voltage:
Output Current:
Output Power:
Wireless Signal:
Note: Receiver is sold separately.
100~240Vac
RF 2.4GHz, DMX512
-30℃~55℃
5~24Vdc
3A × 4CH Max. 12A
60W/144W/288W(5V/12V/24V)
2.4GHz
5~24Vdc
5A × 4CH Max. 20A
100W/240W/480W(5V/12V/24V)
2.4GHz
12~48Vdc
3~46Vdc
CC 350/700/1050mA×4CH
1.05W~48.3W×4CH Max 193.2W
2.4GHz
Dimensions:
Package Size:
Weight(G.W.):
Working Temp.:
Dimensions:
Package Size:
Weight(G.W.):
Working Temp.:
Dimensions:
Package Size:
Weight(G.W.):
Working Temp.:
Dimensions:
Package Size:
Weight(G.W.):
L86×W86×H37(mm)
L113×W112×H50(mm)
225g
-30℃~55℃
L125×W33×H20(mm)
L127×W35×H24(mm)
60g
-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
150g
-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
165g
Product Size:
EX2
Key Functions:
When the touch panel is off, Long press to turn on/off the buzzer
When the touch panel is on ,Long press to match code.
Terminals:
Scene-mode
Press: play
Long press: save
Brightness-
ac
100-240V
Power Input
L N D+ D-
CT Touch Slider
GND
DMX Signal
Output
Installation Instruction:
ON/OFF
Brightness+
Page 2
RF Wireless Wiring:DMX Wiring:
Multi-control Wiring:
Match/Clear Code between Remotes:Match/Clear Code between Touch Panel & Receiver
Match code: Match code:
Method 1：When the touch panel is on and the wiring between the receiver and the lamps are correctly,
1.
Power on the receiver, and
complete step 2 within 10s.
Method 2：When the touch panel is on and the wiring between the receiver and the lamps are correctly,
1.
2.
Long press on the touch
panel, the lamps begin flicker.
2.
3.
Touch the slider in 5s, the
lamps stop flicking, match
successfully.
3.
1.
Assuming that B match up
with A.
Clear code:
2.
Long press on the B,
the indicator lights of 4
keys keep on after release.
Long press the two keys on the touch panel B simultaneously
(about 3 seconds) until the indicator light flicker several times,
deactivate the matching successfully.
3.
Touch the slider on A in 5s,
when the indicator lights of
B turn off, match successfully.
After touch panel A realizes controlling the lamps, if B and C
*
are matched up with A , they can also control the lamps.
Connecting touch panel with DMX decoders can also realize
*
multi-control function.
ID learning button
Short press “ID learning
button” on the receiver.
Clear code:
Power on and off the receiver continuously 5 times,
Method 1:
Method 2:
buzzer long beep and lamps flicker twice, deactivate
If the
the matching successfully.
Long press “ID learning button” on receiver for 5 seconds,
lamps flicker twice, If the deactivate the matching
successfully.
Long press on the touch
panel, the lamps begin flicker.
for
Touch the slider in 5s, the
lamps stop flicking, match
successfully.
ID learning button
Match/Clear Code between Touch Panel & Remote:
Match code:
1.
Long press on the touch
panel, the indicator light of
the four keys flicker.
2.
Long press on the remote,
the indicator light stop
flicking, match successfully.
www. ltech onl ine.c om
Clear code:
Long press the two keys on
the touch panel simultaneously
(about 3 second), if the indicator
light flicker 3 times, deactivate.
Update Time: 2016.06.27
Loading...