Ltech EX1S User guide

Technical Specs

Product Size:

Key Functions:

Installation Instruction:

EX1 S F1

Ma ualn

www. ltech -le d.com

(Dimming)

Rec eiver

Dimming Touch Panel

EX1S

Input Voltage:
Output Signal:

Working Temp.:

F4-3A

CV Receiver

Input Voltage:

Current Load:

Max Output Power:

Wireless Signal:

F4-5A

CV Receiver

Input Voltage:

Current Load:

Max Output Power:

Wireless Signal:

F4-CC

CC Receiver

Input Voltage:
Output Voltage:
Output Current:
Output Power:
Wireless Signal:

Note: Receiver is sold separately.

100~240Vac
RF 2.4GHz, DMX512

-30℃~55℃

5~24Vdc

3A × 4CH Max. 12A

60W/144W/288W(5V/12V/24V)

2.4GHz

5~24Vdc

5A × 4CH Max. 20A

100W/240W/480W(5V/12V/24V)

2.4GHz

12~48Vdc
3~46Vdc
CC 350/700/1050mA×4CH

1.05W~48.3W×4CH Max 193.2W

2.4GHz

Dimensions:
Package Size:
Weight(G.W.):

Working Temp.:

Dimensions:

Package Size:

Weight(G.W.):

Working Temp.:

Dimensions:

Package Size:

Weight(G.W.):

Working Temp.:
Dimensions:
Package Size:
Weight(G.W.):

L86×W86×H36(mm)
L113×W112×H50(mm)
225g

-30℃~55℃

L125×W33×H20(mm)

L127×W35×H24(mm)

60g

-30℃~55℃

L175×W44×H30(mm)

L178×W48×H33(mm)

150g

-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
165g

EX1 S

F4- 3A F4- 5A /F4-C C

Brightness Shortcut Keys

Terminals:

When the touch panel is off, Long press to turn on/off the buzzer

When the touch panel is on ,Long press to match code.

ac

100-240V

Power Input

DMX Signal

Output

Brightness

Touch Slider

ON/OFF

Brightness+

Brightness-

Scene-mode

Short press: play
Long press: save

Touch panel

Typical back box as below:

European style

Baseplate

Back box

Uninstall

86 size

DMX Wiring:

RF Wireless Wiring:

Multi-control Wiring:

After touch panel A realizes controlling the lamps, if B and

*

C are matched up with A , they can also control the lamps.

Connecting touch panel with DMX decoders can also realize

*

multi-control function.

Match/Clear Code between Touch Panel & Receiver

Match/Clear Code between Touch Panels:

Match code: Match code:

Method 1：When the touch panel is on and the wiring between the receiver and the lamps are correct.

1.

Receiver

Power on the receiver, and
complete step 2 within 10s.

Method 2：When the touch panel is on and the wiring between the receiver and the lamps are correct.

1.

ID learning button

Short press “ID learning
button” on the receiver.

Receiver

2.

Long press on the touch
panel, the lamps flicker.

2.

Long press on the touch
panel, the lamps flicker.

3.

Touch the slider in 5s, the
lamps stop flicking, match
successfully.

3.

Touch the slider in 5s, the
lamps stop flicking, match
successfully.

Clear code:

Power on and off the receiver continuously 5 times,

Method 1:

If the

buzzer long beep and lamps flicker twice, deactivate

the matching successfully.

Long press “ID learning button” on receiver for 5 seconds,

Method 2:

lamps flicker twice, If the deactivate the matching

successfully.

for

ID learning button

Receiver

Receiver

1.

Assuming that B match up
with A.

Clear code:

Match/Clear Code between Touch Panel & Remote:

Match code:

1.

Long press on the touch
panel, the indicator light of
all keys flicker.

2.

Long press on B, the
indicator lights of all keys
keep on after release.

Long press the two keys on the touch panel B
simultaneously (about 3 seconds) until the indicator light
flicker several times, deactivate the matching successfully.

3.

Touch the slider on A in 5s,
when the indicator lights of
B turn off, match successfully.

Clear code:

2.

Long press on the remote,
the indicator light stop
flicking, match successfully.

www. ltech -le d.com

Long press the two keys on
the touch panel simultaneously
(about 3 second), if the indicator
light flicker 3 times, deactivate.

Update Time: 2016.06.27