LTB TrakGard TRK User Manual
LTB Enterprises, LLC
ver. 20110223X0.01
TRAKGARD
TM
-
Portal
Alarm
System
Instruction Manual
Model
TRK
FCC ID
W39TRK
Version
20110223
X0.
01
LTB Enterprises, LLC dba TrakGard
TM
PO
Box 727
Vancouver, WA 98666
Website:
www.Trakgard.com
Email support: support@Trakgard.com
.
LTB Enterprises, LLC
ver. 20110223X0.01
Parts supplied:
1 babysitter unit
1 baby unit
2 UL certified 9 V DC power supply modules
8 AA 1.5 V
non-rechargeable
batteries
TrakGard
TM
is a
portable
wireless
motion sensing
alarm
system
designed
to alert a user of
human
(
or animal
)
activity occurring in front of
its sensing lens
.
In its simplest form
,
it consists of
one
babysitter
(Portal)
device
and
one
baby
(Guard)
device
.
In the absence of obstacles,
these two
d
evices communicate
over distances
well in excess of
1000
feet. Even
in the presence of
obstacles
,
the wireless waves ricochet around obstacles over long distances
.
It is therefore not
necessary for
the babysitter and baby
to be in line of sight to communicate
with one another
.
The baby can be
placed
inside
such
places
as
the interiors of cars and trucks,
or around
freight or
container boxes,
hallway
s
, door entrance
s,inside
small
closed
spaces
including
backpacks,
gym
bags,
tool boxes
, medicine cabinets, safes,
or any other area to be monitored for activity
.
The babysitter
-
baby combination can also be used in helping alert a caregiver of the
ambulatory
activity
ofaloved one walking about in
the privacy of their own home or apartment, or in an
assisted living facility. It can also be shared by neighbors looking after the homes of their
neighbors absent
or
on vacation from their home, providing a means of alerting a watchful
neighbor of an intr
usion in time to call for help, and hence
serve
a role in neighborhood
crime
prevention
programs.
Security a
lerts
(intrusion events sensed by babies)
display on the
front panel of the
babysitter as
flashing LEDs and are accompanied by an audible
repeating beep
.
The front face panel of each
device has a total for five LEDs arrayed across the top edge of
the
panel in an arc. The LED in the
middle of the array designated “P” is reserved for the babysitter. The remaining LEDs, two to the
left of the
P LED designated I and II and two to the right of the P LED designated III and IIII, are
reserved
for assignment to babies.
Additional babies can be obtained from
TrakGard
TM
for
linking up with a babysitter currently in operation by a user.
A plug
-
in rec
eptacle is located on the side of each device for
supplying power in maintaining
operation of the device using
a
UL 9V power
supply module
plugged into a standard wall
outlet
.
1
Devices run off of a set of 4 AA batteries.
Ifrechargeable
batteries are used in the battery
holder,
periodic use of the power module
connected to the device through the plug
-inreceptacle
will automatically recharge the batteries
.
1
The polarity of the barrel plug (5.5 mm OD x 2.1 mm ID x 9.5 mm length) conveying power
from a DC power supply module must be positive on the inside
and negative on the outside
.Towork properly when connected to an external power source, babies and babysitters require a
power source supply between 7V to14V having a 3 Watt (or better) output.
Loading...