LSP Products Group 2017 User Manual

2017 CATALOG

COMPANY HISTORY / A LEGACY OF INNOVATION

COMPANY HISTORY

LSP was founded by plumbers over 40 years ago with a focus on unparalleled innovation, superior product quality, and best-in-class service to the plumbing industry. Since its beginning as Specialty Products

ex connector, UltraCore

™

, the Pull Stop Box™, and the Flex Arrester™. Our primary focus is the new construction market where we develop products

that make installations easy and provide signicant cost savings to the

™

, LSP has continued to lead plumbing products innovation with inventions like the stainless steel braided

plumbing/mechanical contractor.

BACKGROUND / OPERATIONS

LSP is owned by NCH Corporation (NCH), a privately (family) owned corporation based in Irving, Texas. NCH has been owned by the same family and headquartered in Irving for over 90 years which provides signicant stability

and longevity to LSP. LSP 100% owns and operates two manufacturing

facilities located in Carson City, Nevada, and Hainan, China. LSP also has two Distribution Centers located in Carson City, Nevada (servicing the West/ Rockies), and Dallas, Texas (servicing the Central and Eastern U.S.), plus a

number of satellite warehouses providing local inventory.

COMPANY TODAY

While plumbing practices and products have changed over the last 40 years, LSP’s focus on designing and manufacturing innovative products remains steadfast. LSP concentrates its efforts on making a plumber’s job simpler, easier, and faster. Our products not only reduce installation time and labor, but

are also built to the highest quality standards and come with unmatched customer support and service.

Today, LSP consists of the following product divisions:

• Specialty Products

™

/ Benjamin Mfg. - outlet boxes, tub boxes, clamps, test caps,

hangers, AAVs, pipe secure brackets, copper stubouts, hammer arresters, tub

protectors, water heater pans, foam wrap, and much more

• Aqua-Flo

- a full line of braided, vinyl, and corrugated connectors and stops and

LSP’s innovative Pull Stop Box™.

• Insulation - polyolen foam and rubber pipe insulation

COMPANY HISTORY

drains, closet anges, and access covers

• Rapid-Fit

• Tech Specialties

/ Frank Pattern™ - a broad line of roof drains, oor drains, shower

- bath waste and overow assemblies with designer nishes

• Chemicals - pipe thread sealants, solvent cements, and primers

Helping families realize the American Dream by delivering innovative, plumbing solutions.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

BUY AMERICA / LEAD FREE

BUY AMERICA

LSP proudly supports the American Recovery and Reinvestment Act (ARRA) of 2009 and the original Buy American Act of 1933. ARRA requires that any project receiving government funding must purchase American-made goods, if at all possible. This provision promotes American people to buy goods that have been produced by other Americans.

LSP has manufacturing facilities and is headquartered in the United States. We do everything possible to manufacture and source our products domestically and are proud to offer many American made products. You can easily locate American-made products throughout the catalog by looking for the USA symbol below.

The products below meet the "Buy American: provisions of Section 1605" of the ARRA.

• All Plastic Outlet Boxes Without Valves

• Lever-Lock

• PEX Elbows

• Single Nail Clamps

• Flexi-Fin Clamps

• Plastic Plumbers Tape

• Hang’Em II

Pipe Hangers

• All Groundwork Items

• All Test Caps and Plugs

• Benjamin Mfg. Products

• Inline Hammer Arresters

• Ultra EZ Turn Valve

• Polyolen Foam Insulation

Frank Pattern

™

• Roof Drains

• Deck Drains

• Drain Accessories

• Hard Base Poly Roof Flashings

™

• Flex-All

Soft Base

Roof Flashings

• Poly Pipe Vent Shields

• Solvent Cements and Primers

• Pipe Thread Sealants

BUY AMERICA / LEAD FREE

LEAD FREE

LSP is continually focused on quality products. This focus includes consumer safety. In support of the "Lead Free" legislation that is now in effect in the U.S., LSP offers "Lead Free" products that contain less than 0.25% lead by weighted average. These products comply with all state and federal legislation that revise the Federal Safe Drinking Water Act and the Lead Contamination Control Act of 1988. Previous to the recent "Lead Free" legislature, plumbing components could contain up to 8% lead.

LSP is devoted to providing "Lead Free" products. These items are easily identied by the checkmark symbol.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

TABLE OF CONTENTS

Washing Machine Outlet Boxes, Ice Maker Boxes, Utility Boxes, Gas Outlet Boxes, Faceplates, Air Admittance Valves, PipeSecure™ Brackets & Accessories, Hyco Straps, Copper Stub Outs, Grommets, Brackets, PEX Elbows, Clamps, Acousto® Clamp Systems, Acousto® Kits, Hangers, Mini Hammer Arresters, Pipe Protectors, Tub Boxes, Gorundwork Items, Test Caps& Plugs, Access Panels & Covers, Cleanout Covers, Spacers, In-Sul Wrap, Foam Tape, Organizational Trays, Nipple Caddies, Dirt Rider, Ladder Ledge, Water Heater Pans, Washing Machine Pans, Tub Protectors, Custom Tub Protector Order Form

Pull Stop Box™, Pull Stop Box™ Trim Kits & Accessories, Quarter Turn Ball Valves, Flex Arrester, Water Heater Connectors, Faucet Connectors, Toilet Connectors, Washing Machine Connectors, Ice Maker Connectors, Dishwasher Connectors, Connector Kits, Specialized Connectors, Polymer Push-On Valves and Hoses

4-39

40-59

Frank Pattern

TABLE OF CONTENTS

Polyolen Foam (Self-Sealing, Half-Slit), Rubber Un-slit, Rubber Seam Seal

™

Roof Drains, Floor Drains, Area Drains, Shower Drains, Deck Drains, Roof Flashings, Closet Rings & Flanges, Cleanout Covers, Floor Access Covers

Rough-In Kits, PVC & ABS Bath Waste & Assemblies, Designer Finish Trim Kits, Brass & Plastic Bath Waste Assemblies, Trim Kits & Accessories

60-67

68-81

82-87

Solvent Cements and Primers, Pipe Thread Sealants

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

88-93

NOTES

NOTES:

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

NOTES

TABLE OF CONTENTS

Specialty Products™ is LSP’s original division. When it developed washing machine and ice maker outlet boxes over 40 years ago, Specialty Products™ acquired its reputation as the innovation leader to the plumbing industry. That unwavering focus on innovation also lead to the development of pipe clamps, test caps, and tub boxes among many other products. Today, Specialty’s Hang ‘em Hangers™ and PipeSecure™ Brackets provide the quickest way to support pipe runs.

LSP has partnered with Benjamin Manufacturing Co. to offer a broad range of tub protectors, tote trays, nipple caddies, plastic water heater pans, access covers, foam wrap, and much more. These products are designed to make a plumber’s job easier and reduce installation costs. Many of the products are constructed of high impact plastic that is extremely tough, resilient, and withstands rust. These products are manufactured domestically.

Kahuna™ Washing Machine Outlet Boxes ......................................................... 6

Switch Hitter® Outlet Boxes ............................................................................7-9

Tornado Outlet Boxes ........................................................................................ 9

TABLE OF CONTENTS

Firestop™ & Metal Washing Machine Outlet Boxes & Valves .....................10-11

Ice Maker Boxes & Valves ..........................................................................12-15

Utility & Gas Outlet Boxes................................................................................ 16

Mini Hammer Arresters .................................................................................... 17

Gas Outlet Box Valves & Faceplates ............................................................... 18

Air Admittance Valves ...................................................................................... 19

PipeSecure™ Brackets ...................................................................................... 20

Hyco Strap & Copper Stub Outs ..................................................................... 21

PEX Elbows ...................................................................................................... 22

Clamps ........................................................................................................23-24

Acousto® Clamp System .............................................................................25-26

Pipe Hangers & J-Hooks .................................................................................. 26

Grommets, Boss Bar & Lever Lock™ ............................................................... 27

Plastic Sleeve & Tub Boxes ............................................................................. 28

Groundwork Items ............................................................................................ 29

Test Caps & Plugs .......................................................................................30-31

Access Panels .................................................................................................. 32

Cleanout Covers ............................................................................................... 34

Organizational Trays......................................................................................... 35

Nipple Caddies, Dirt Riders & Ladder Ledge ................................................... 36

Water Heater & Washing Machine Pans .......................................................... 37

Tub Protectors ................................................................................................. 38

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

PULL STOP BOX

Has Revolutionized the Plumbing Industry!

™

The Pull Stop Box™ by LSP

Designed to take the hassle out of angle stop

installation by eliminating the need to stub out and

moving the angle stop into the wall, the end result is

a beautiful, nished look.

See all the Pull Stop Box

™

options starting on page 41 in the Aqua-Flo® Section.

PULL STOP

™

BOX

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Kahuna™ Outlet Box

Kahuna™ Outlet Box w/ Clear Cover

Kahuna™ Outlet Box with Hammer Arresters

and Optional Condensate

OB-2011

Condensate Stand

P-00991

White Faceplate

P-00910

KAHUNA™ WASHING MACHINE OUTLET BOXES

The most durable outlet box in the plumbing industry. Our error-proof, no knockout drains allow for hassle-free testing. Fill your stack directly from the box and test without a mess! Dual drain feature allows you to choose right or left outlet. Easy-to-install cosmetic cap hides unused drain. Optional, innovative condensate, with visible air gap, accommodates secondary drainage where needed. Quarter Turn Ball Valve Outlet Box. Dimensions: 7-1/4" x 9-3/4" x 3-3/4". Faceplate: 12.32" x 8.50".

PART NUMBER DESCRIPTION

WITHOUT VALVES

OB-2000 White, Unassembled 10

WITH COPPER SWEAT VALVES

OB-2010 White, Unassembled 10 OB-2011 White, Assembled 10

WITH CPVC VALVES

OB-2020 White, Unassembled 10 OB-2021 White, Assembled 10

WITH CRIMP PEX VALVES

OB-2030 White, Unassembled 10 OB-2031 White, Assembled 10

WITH UPONOR ProPEX® VALVES

OB-2060 White, Unassembled 10 OB-2061 White, Assembled 10

WITH SIMPLEX VALVES

OB-2400 White, Copper Sweat 10 OB-2401 White, CPVC 10 OB-2402 White, Crimp PEX 10 OB-2403 White, Uponor PEX 10

WITH VIEGA VALVES

OB-2070 White, Unassembled 10 OB-2071 White, Assembled 10

ACCESSORIES / REPLACEMENT PARTS

P-00991 Condensate Stand 3 P-00910 White Faceplate 20 P-00992 Test Plug 10

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately) Add "-C" to the end of the part number for Condensate stand Add "-P" to the end of part number for Test Plug

MSTR CTN

QTY

WASHING MACHINE OUTLET BOXES

™

KAHUNA

Kahuna™ Outlet Box w/ Hammer Arresters,

Plastic Simplex Handle,

Clear Cover and Optional Condensate

OB-2111

Plastic Simplex Handle

P-06066

All of the great features of our Kahuna

™

Outlet Box with Water Hammer Arresters. Outlet box includes

a plastic Simplex handle.

PART NUMBER DESCRIPTION

MSTR CTN

WITH COPPER SWEAT VALVES

OB-2110 White, Unassembled 10 OB-2111 White, Assembled 10

WITH CPVC VALVES

OB-2120 White, Unassembled 10 OB-2121 White, Assembled 10

WITH CRIMP PEX VALVES

OB-2130 White, Unassembled 10 OB-2131 White, Assembled 10

WITH UPONOR ProPEX® VALVES

OB-2160 White, Unassembled 10 OB-2161 White, Assembled 10

ACCESSORIES / REPLACEMENT PARTS

P-00991 Condensate Stand 3 P-00910 White Faceplate 20 P-06066 Plastic Simplex Handle 1 P-00992 Test Plug 10

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately) Add "-C" to the end of the part number for Condensate Add "-P" to the end of part number for Test Plug

QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Plastic Switch Hitter® Outlet Box

SWITCH HITTER® OUTLET BOXES

One box does it all! Patented design provides left, center and right waste options. Knockouts accept

either waste or water lines. Quarter Turn Ball Valve. Durable brass resists corrosion. Valves certied

to ASME 112.18.1/CSA B125.1 Standard. Long lasting double stem O-rings and tough PTFE seats. Dimensions: Box: 6-1/2" x 7-5/8" x 3". Faceplate: 10-3/8" x 8-7/16".

PART NUMBER DESCRIPTION

WITHOUT VALVES

OB-100 Beige 10

Center Outlet

OB-101

Left Outlet

OB-203

OB-101 White 10

WITH COPPER SWEAT VALVES

OB-102 Beige, Unassembled 10 OB-200 Beige, Center Outlet 10 OB-202 Beige, Left Outlet 10 OB-103 White, Unassembled 10 OB-201 White, Center Outlet 10 OB-203 White, Left Outlet 10 OB-205 White, Right Outlet 10

WITH CPVC VALVES

OB-351 White, Unassembled 10 OB-353 White, Center Outlet 10 OB-355 White, Left Outlet 10 OB-357 White, Right Outlet 10

WITH CRIMP PEX VALVES

OB-321 White, Unassembled 10 OB-323 White, Center Outlet 10 OB-325 White, Left Outlet 10 OB-327 White, Right Outlet 10

WITH UPONOR ProPEX

OB-331 White, Unassembled 10 OB-338 White, Center Outlet 10

WITH VIEGA PEX VALVES

OB-341 White, Unassembled 10 OB-343 White, Center Outlet 10

REPLACEMENT FACEPLATES

OB-900 Beige, for Switch Hitter OB-901 White, for Switch Hitter OB-903 White, for Switch Hitter® (Deep) 100

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

VALVES

MSTR CTN

QTY

SWITCH HITTER

100 100

OUTLET BOXES

Right Outlet

OB-205

White Faceplate

OB-901

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Plastic Switch Hitter® Outlet Box

Plastic Switch Hitter® Outlet Box With Water Hammer Arresters and Plastic Simplex™ Handle

Plastic Switch Hitter® Outlet Box With Water Hammer Arresters

w/ Hammer Arrester

OB-207

SWITCH HITTER® OUTLET BOXES

All the great features of our Plastic Switch Hitter® Outlet Box with Water Hammer Arresters.

PART NUMBER DESCRIPTION

WITH COPPER SWEAT VALVES

OB-210 White,Unassembled 10 OB-207 White, Center Outlet 10 OB-209 White, Left Outlet 10

WITH CPVC VALVES

OB-211 White, Unassembled 10 OB-213 White, Center Outlet 10

WITH CRIMP PEX VALVES

OB-216 White, Unassembled 10 OB-218 White, Center Outlet 10

WITH UPONOR ProPEX

VALVES

OB-217 White, Unassembled 10 OB-219 White, Assembled 10

WITH VIEGA VALVES

OB-237 White, Assembled 10

REPLACEMENT FACEPLATES

OB-900 Beige Faceplate 100 OB-901 White Faceplate 100 OB-903 White Faceplate (Deep) 100

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

MSTR CTN

QTY

OUTLET BOXES

SWITCH HITTER

Plastic Simplex Handle

P-06066

Our standard Plastic Washing Machine Outlet Box with Water Hammer Arresters is now available with convenient Plastic Simplex handle. The Plastic Simplex handle slides onto the valve handles, turning them into a single-lever valve. Quarter Turn Ball Valve. Dimensions: Box 6-1/2" x 7-5/8" x 3". Faceplate: 10-3/8" x 8-7/16".

PART NUMBER DESCRIPTION

MSTR CTN

QTY

WITH COPPER SWEAT VALVES

OB-410-L White, Assembled, Left Outlet 10 OB-410-R White, Assembled, Right Outlet 10

WITH CPVC VALVES

OB-411-L White, Assembled, Left Outlet 10 OB-411-R White, Assembled, Right Outlet 10

WITH CRIMP PEX VALVES

OB-416-L White, Assembled, Left Outlet 10 OB-416-R White, Assembled, Right Outlet 10

WITH UPONOR ProPEX® VALVES

OB-417-L White, Assembled, Left Outlet 10 OB-417-R White, Assembled, Right Outlet 10

REPLACEMENT FACEPLATES

OB-901 White, for Switch Hitter

100

ACCESSORIES / REPLACEMENT PARTS

P-06066 Plastic Simplex Handle 1

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Plastic Switch Hitter® Outlet Box With Plastic Simplex Handle

SWITCH HITTER® OUTLET BOXES

Tornado™ Outlet Box

Consolidates all valves and hose connections into one unit. Unique single-lever handle controls both hot and cold water with one movement. Dimensions: Box 6-1/2" x 7-5/8" x 3". Faceplate: 10-3/8" x 8-7/16".

PART NUMBER DESCRIPTION

Plastic Switch Hitter™ w/ Plastic Simplex Handle

and Crimp PEX Valves

OB-435

White Faceplate

OB-901

WITH COPPER SWEAT VALVES

OB-400 Beige, Unassembled 10 OB-402 Beige, Left Outlet 10 OB-404 Beige, Right Outlet 10 OB-401 White, Unassembled 10 OB-403 White, Left Outlet 10 OB-405 White, Right Outlet 10

WITH CPVC VALVES

OB-429 White, Unassembled 10

WITH UPONOR ProPEX VALVES

OB-438 OB-439 White, Left Outlet 10

WITH CRIMP PEX VALVES

OB-435 White, Unassembled 10 OB-437 White, Left Outlet 10

REPLACEMENT FACEPLATES

OB-901 White, for Switch Hitter OB-903 White, for Switch Hitter® (Deep) 100

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

MSTR CTN

QTY

White, Unassembled 10

100

Tornado™ Outlet Box w/ Hammer Arresters

OB-723

™

Tornado

Outlet Box

OB-711

Constructed from high-impact plastic. Deeper faceplate and factory assembled drain funnel. Accommodates washing machine discharge and condensate while preventing installation errors. Easy to install condensate pipe stand provides quick visual inspection of required air gap. Quarter Turn Ball Valve. Dimensions: 11-1/4" x 6-1/4" x 3.8".

PART NUMBER DESCRIPTION

MSTR CTN

QTY

WITH COPPER SWEAT VALVES

OB-711 White, Unassembled 5 OB-723 White, w/ Hammer Arresters, Assembled 5

WITH CPVC VALVES

OB-707 White, Unassembled 5 OB-708 White, Unassembled, No Funnel 5 OB-709 White, Assembled 5 OB-709-TOP White, Top Mounted, Assembled 5 OB-719 White, w/ Hammer Arresters, Assembled 5

WITH CRIMP PEX VALVES

OB-703 White, Unassembled 5 OB-705 White, Assembled 5 OB-705-TOP* White, Top Mounted, Assembled 5 OB-724 White, w/ Hammer Arresters, Assembled 5 OB-724-TOP* White, Top Mounted w/ Hammer Arresters 5

WITH UPONOR ProPEX

VALVES

OB-720 White, Assembled 5 OB-720-TOP* White, Top Mounted, Assembled 5 OB-721 White, w/ Hammer Arresters, Assembled 5 OB-721-TOP* White, Top Mounted w/ Hammer Arresters 5

WITH VIEGA PEX VALVES

OB-704 White, Unassembled 5 OB-706 White, Assembled 5 OB-734 White, Assembled, w/ Hammer Arresters 5

ACCESSORIES / REPLACEMENT PARTS

OB-781 White Faceplate & Brackets 50

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately) * Does not come with Simplex Handle

SWITCH HITTER

OUTLET BOXES

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

FireStop™ Washing Machine Outlet Box

Metal Washing Machine Outlet Box

FireStop™ Washing Machine Outlet Box

OBFS-2011

FireStop™ Washing Machine Outlet Box

w/ Hammer Arresters

OBFS-2111

FIRESTOP™ & METAL OUTLET BOXES

The most versatile, re-rated box in the industry. Similar in design to the Switch Hitter®, valves may be mounted right/left, or with center drain, and from top or bottom. Constructed from re-resistant PVC,

with a factory-mounted intumescent pad. FireStop E-814 and CAN/ULC S115 – 1Hr. and 2Hr. listings. Suitable for use on wood or metal studs, and with all pipe types. Molded in test cap for testing of DWV drain. Quarter Turn Ball Valve. Dimensions: 7-1/16" x 8-3/16" x 3". Faceplate: 11" x 8-3/4". Faceplates will accommodate 1.25" wall thickness.

PART NUMBER DESCRIPTION

WITHOUT VALVES

OBFS-2000 White, Without Valves 10

WITH COPPER SWEAT VALVES

OBFS-2010 White, Unassembled 10 OBFS-2011 White, Assembled, Center Drain 10 OBFS-2110 White, Unassembled w/ Hammer Arresters 10 OBFS-2111 White, Assembled, Center Drain, w/ Hammer Arresters 10

WITH CPVC VALVES

OBFS-2020 White, Unassembled 10 OBFS-2021 White, Assembled, Center Drain 10 OBFS-2120 White, Unassembled w/ Hammer Arresters 10 OBFS-2121 White, Assembled, Center Drain, w/ Hammer Arresters 10

WITH CRIMP PEX VALVES

OBFS-2030 White, Unassembled 10 OBFS-2031 White, Assembled, Center Drain 10 OBFS-2130 White, Unassembled w/ Hammer Arresters 10 OBFS-2131 White, Assembled, Center Drain, w/ Hammer Arresters 10

WITH VIEGA VALVES

OBFS-2137 White, Assembled 10

WITH UPONOR ProPEX

VALVES

OBFS-2060 White, Unassembled 10 OBFS-2061 White, Assembled, Center Drain 10 OBFS-2160 White, Unassembled w/ Hammer Arresters 10 OBFS-2161 White, Assembled, Center Drain, w/ Hammer Arresters 10

ACCESSORIES / REPLACEMENT PARTS

P-00213 White Faceplate 1

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

™

boxes are Warnock Hersey certied to ASTM

MSTR

CTN QTY

& METAL OUTLET BOXES

™

FIRESTOP

Metal Washing Machine Outlet Box

OB-501

Available in reversible left or right outlet and center outlet models. Easy to install. Packaged with

faceplate. Valves certied to ASME A112.18.1/CSA B125.1 Standard. 20 gauge, with white powder-

coat paint. Patented design. Quarter Turn Ball Valve. Dimensions: Box: 5-7/8" x 8-11/3" x 3-1/2". Faceplate: 8-1/4" x 10-5/16". All come unassembled.

PART NUMBER DESCRIPTION

MSTR

CTN QTY

WITHOUT VALVES

OB-500 Reversible Outlet 5

WITH COPPER SWEAT VALVES

OB-501 Left or Right Outlet 5 OB-502 Center Outlet 5 OB-505 Left or Right Outlet 5

WITH CRIMP PEX VALVES

OB-506 Center Outlet 5

WITH UPONOR ProPEX

VALVES

OB-525 Center Outlet 5

WITH CPVC VALVES

OB-550 White, Center Outlet 5 OB-551 Left or Right Outlet 5

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

METAL OUTLET BOXES & VALVES

Metal Washing Machine Outlet Box With Water Hammer Arresters

3/4" GHT Washing Machine Outlet Box Valves

All of the same great features of our Metal Washing Machine Outlet Box with Water Hammer Arresters.

PART NUMBER DESCRIPTION

WITH COPPER SWEAT VALVES

OB-508 White, Center Outlet 5 OB-510 White, Left or Right Outlet 5

WITH CPVC VALVES

OB-513 White, Center Outlet 5 OB-511 White, Left or Right Outlet 5

WITH CRIMP PEX VALVES

OB-516 White, Center Outlet 5

Metal Washing Machine Outlet Box

w/ Water Hammer Arresters

OB-510

OB-517 White, Left or Right Outlet 5

WITH UPONOR ProPEX® VALVES

OB-519 White, Center Outlet 5

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

Quarter Turn Ball Valves. Durable brass resists cracking and corrosion. Color coded handles – red/blue

for hot/cold. Easy on/off nger control. Valves are certied to ASME A112.18.1 Standard. Long lasting

double stem O-rings and tough PTFE seats.

MSTR CTN

QTY

Red CPVC 3/4" GHT Washing Machine

Outlet Box Valve

P-06292

Blue Crimp PEX 3/4" GHT Washing Machine

Outlet Box Valve

P-06238

HANDLE

STD.

VALVE

MSTR

CTN QTY

VALVE w/ H.A.

MSTR

CTN QTY

NON-H.A.

FOR SIMPLEX

MSTR

CTN QTY

WITH COPPER SWEAT VALVES

Red P-06287 100 P-06295 24 P-06315 24 Blue P-06286 100 P-06294 24 P-06314 24

WITH CPVC VALVES

Red P-06292 100 P-06257 24 P-06319 24 Blue P-06291 100 P-06256 24 P-06318 24

WITH CRIMP PEX VALVES

Red P-06301 100 P-06237 24 P-06317 24 Blue P-06300 100 P-06238 24 P-06316 24

WITH VIEGA VALVES

Red P-06338 24 Blue P-06337 24

WITH UPONOR ProPEX

VALVES

Red P-06421 100 P-06434-WB 48 P-06370 48 Blue P-06420 100 P-06433-WB 48 P-06371 48

ACCESSORIES / REPLACEMENT PARTS

1/2" Plastic Nut For Mounting Valve P-06068 1,000 Simplex Handle P-06066 1,000

H.A. = Hammer Arrester

METAL OUTLET BOXES & VALVES

P-06421

3/4" GHT

Red Uponor ProPEX

Washing Machine Outlet Box Valve

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

MINI ICE MAKER BOXES

Mini Ice Maker Box

Mini Ice Maker Box With Water Hammer Arrester

Modern design with added strength provides unquestionable reliability. Longer mounting ears accommodate all applications. Quarter Turn Ball Valve. All boxes are assembled.

Mini Ice Maker Box

OB-8010-LL

PART NUMBER DESCRIPTION

MSTR CTN

WITHOUT VALVE

OB-8000 White, No Valve 10

WITH COPPER SWEAT VALVE

OB-8010-LL White, 1/2" Copper Sweat x 1/4" Compr. 10

WITH CPVC VALVE

OB-8020-LL White, 1/2" CPVC x 1/4" Compr. 10

WITH CRIMP PEX VALVE

OB-8030-LL White, 1/2" PEX x 1/4" Compr. 10 OB-8031-LL White, 3/8" PEX x 1/4" Compr. 10

WITH UPONOR ProPEX

VALVE

OB-8040-LL White, 1/2" Uponor x 1/4" Compr. 10

WITH VIEGA VALVE

OB-8070-LL White, 1/2" PEX x 1/4" Compr. 10

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

Lead Free

QTY

Mini Ice Maker Box

w/ Water Hammer Arrester

MINI ICE MAKER BOXES

OB-8110-LL

All the great features of our Mini Ice Maker Box with Water Hammer Arrester. All boxes are assembled.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

WITH COPPER SWEAT VALVE

OB-8110-LL White, 1/2" Copper Sweat x 1/4" Compr. 10

WITH CPVC VALVE

OB-8120-LL White, 1/2" CPVC x 1/4" Compr. 10

WITH CRIMP PEX VALVE

OB-8130-LL White, 1/2" PEX x 1/4" Compr. 10

WITH UPONOR ProPEX

VALVE

OB-8140-LL White, 1/2" Uponor x 1/4" Compr. 10

WITH VIEGA VALVE

OB-8170-LL White, 1/2" Uponor x 1/4" Compr. 10

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

Lead Free

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Plastic Ice Maker Box

Plastic Ice Maker Box With Hammer Arrester

PLASTIC ICE MAKER BOXES

Slim-line prole for 1" backing. Ribbed walls add support for greater strength and better alignment.

Adjustable faceplate accommodates up to 5/8" wall thickness. Top and bottom nailing tabs assure

solid installation. Constructed of high-impact plastic. Valve certied to ASME A112.18.1/CSA B125.1

Standard. Quarter Turn Ball Valve. Dimensions: Box: 5-3/16" x 5-3/16" x 2-1/2". Faceplate: 6-13/1" x 6-13/16". All valves are 1/2" inlet x 1/4" outlet, unless otherwise noted. All boxes are assembled.

PART NUMBER DESCRIPTION

WITHOUT VALVE

Plastic Ice Maker Box

OB-801-LL

OB-802 Beige 10 OB-803 White 10

WITH COPPER SWEAT VALVE

OB-800-LL Beige, 1/2" Copper Sweat x 1/4" Compr. 10 OB-801-LL White, 1/2" Copper Sweat x 1/4" Compr. 10

WITH CPVC VALVE

OB-807-LL White, 1/2" CPVC x 1/4" Compr. 10

WITH CRIMP PEX VALVE

OB-811-LL White, 1/2" PEX x 1/4" Compr. 10 OB-810-LL White, 3/8" PEX x 1/4" Compr. 10

WITH UPONOR ProPex

OB-814-LL White, 1/2" Uponor x 1/4" Compr. 10

WITH VIEGA PEX VALVE

OB-843-LL White, 1/2" Viega x 1/4" Compr. 10

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

VALVE

MSTR CTN

QTY

Lead Free

Plastic Ice Maker Box

w/ Hammer Arrester

OB-817-LL

All the great features of our Plastic Ice Maker Box with Water Hammer Arrester.

PART NUMBER DESCRIPTION

MSTR CTN

WITH COPPER SWEAT VALVE

OB-817-LL White, 1/2" Copper Sweat x 1/4" Compr. 10

WITH CPVC VALVE

OB-819-LL White, 1/2" CPVC x 1/4" Compr. 10

WITH CRIMP PEX VALVE

OB-818-LL White, 1/2" PEX x 1/4" Compr. 10 OB-820-LL White, 3/8" PEX x 1/4" Compr. 10

WITH UPONOR ProPEX® VALVE

OB-824-LL White, 1/2" Uponor x 1/4" Compr. 10

Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

Lead Free

PLASTIC ICE MAKER BOXES

QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

FireStop™ Ice Maker Box

OBFS-8010-LL

FIRESTOP™ ICE MAKER BOXES

The re-rated Ice Maker box is similar in design to the Mini Ice Maker, with a modern look and compact prole, but is constructed from re-resistant PVC, with a factory-mounted intumescent pad.

™

FireStop listings. Suitable for use on wood or metal studs, and with all pipe types. Quarter Turn Ball Valve. Dimensions: 5-11/16" x 3-7/8" x 2-5/8". Faceplate: 5-1/4" x 7-1/4". Faceplates will accommodate

1.25" wall thickness.

boxes are Warnock Hersey certied to ASTM E-814 and CAN/ULC S115 - 1Hr. and 2Hr.

PART NUMBER DESCRIPTION

MSTR

CTN QTY

WITHOUT VALVE

OBFS-8000 White, No Valves 10

WITH COPPER SWEAT VALVE

OBFS-8010-LL White, 1/2" Copper Sweat x 1/4" Compr. 10 OBFS-8110-LL White, 1/2" Copper Sweat x 1/4" Compr. w/ Hammer Arrester 10

WITH CPVC VALVE

OBFS-8020-LL White, 1/2" CPVC x 1/4" Compr. 10 OBFS-8120-LL White, 1/2" CPVC x 1/4" Compr. w/ Hammer Arrester 10

WITH CRIMP PEX VALVE

OBFS-8030-LL White, 1/2" PEX x 1/4" Compr. 10 OBFS-8130-LL White, 1/2" PEX x 1/4" Compr. w/ Hammer Arrester 10

WITH UPONOR ProPEX

VALVE

OBFS-8040-LL White, 1/2" Uponor x 1/4" Compr. 10 OBFS-8140-LL White, 1/2" Uponor x 1/4" Compr. w/Hammer Arrester 10

WITH VIEGA VALVE

OBFS-8170-LL White, 1/2" Uponor x 1/4" Compr. 10

FireStop™ Ice Maker Box

w/ Hammer Arrester

OBFS-8110-LL

ICE MAKER BOXES

™

FIRESTOP

* Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

Lead Free

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Ice Maker Outlet Box Valves

Metal Ice Maker Box

Metal Ice Maker Box With Water Hammer Arrester

METAL MAKER BOXES & VALVES

Slim-line prole for 1" backing. Ribbed walls add support for greater strength and better alignment.

Adjustable faceplate accommodates up to 5/8" wall thickness. Top and bottom nailing tabs assure

solid installation. Valve certied to ASME A112.18.1/CSA B125.1 Standard. Quarter Turn Ball Valve.

Dimensions: Box: 5-1/8" x 5-5/8" x 2-1/2". Faceplate: 6-13/16" x 6-13/16". All boxes are unassembled.

PART NUMBER DESCRIPTION

WITHOUT VALVE

OB-503 White 5

Metal Ice Maker Box

OB-504-LL

Metal Ice Maker Box w/ Hammer Arrester

OB-509-LL

WITH COPPER SWEAT VALVE

OB-504-LL White, 1/2" Copper Sweat x 1/4" Compr. 5

WITH CPVC VALVE

OB-514-LL White, 1/2" CPVC x 1/4" Compr. 5

WITH CRIMP PEX VALVE

OB-507-LL 1/2" PEX x 1/4" Compr. 5 OB-512-LL 1/2" x 1/4" Compr. 5

* Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

All the great features of our Metal Ice Maker Box with Water Hammer Arrester.

PART NUMBER DESCRIPTION

WITH COPPER SWEAT VALVE

OB-509-LL White, 1/2" Copper Sweat x 1/4" Compr. 5

WITH CPVC VALVE

OB-515-LL White, 1/2" CPVC x 1/4" Compr. 5

WITH CRIMP PEX VALVE

OB-518-LL White, 1/2" PEX x 1/4" Compr. 5

WITH UPONOR ProPEX® VALVE

OB-520-LL White, 1/2" Uponor x 1/4" Compr. 5

* Add "-T" to the end of the part number for Tract Pack (faceplates packaged separately)

MSTR CTN

QTY

Lead Free

MSTR CTN

QTY

METAL ICE MAKER BOXES & VALVES

Lead Free

Quarter Turn Ball Valves. Durable brass resists cracking and corrosion. Easy on/off nger control. Valves are certied to ASME A112.18.1/CSA 125.1 Standard. Long lasting double stem O-rings and

tough PTFE seats.

INLET OUTLET STD. VALVE VALVE w/ H.A.

Ice Maker Outlet Box Valve

P-06288-LL

COPPER SWEAT

1/2" 1/4" Compr. P-06288-LL P-06296-LL 80

CPVC

1/2" 1/4" Compr. P-06293-LL P-06258-LL 80

CRIMP PEX

1/2" 1/4" Compr. P-06302-LL P-06239-LL 80 3/8" 1/4" Compr. P-06462-LL 80

VIEGA VALVES

1/2" Viega PEX 1/4" Compr. P-06325-LL P-06339-LL 80

UPONOR ProPEX

1/2" 1/4" Compr. P-06422-LL P-06335-WB-LL 80

ACCESSORIES / REPLACEMENT PARTS

1/2" Plastic Nut For Mounting Valve P-06068 5000

Ice Maker Outlet Box Valve -

Copper Sweat w/ H.A.

P-06296-LL

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

MSTR CTN

QTY

Lead Free

Utility Outlet Box

UTILITY AND GAS OUTLET BOXES

Perfect Fit™ Gas Outlet Box

Deep Gas Outlet Box

FireStop™ Gas Outlet Box

Innovative box for multiple applications. Provides easy access to main water supply shut-off. Saves

time and money. Utility Box includes compact 1" shut-off valve with buttery-handle. Box is offered

without valves for your own innovative applications. Dimensions: 6" x 6" x 3-3/8". Faceplate: 8" x 8".

Utility Outlet Box

OB-1200

Perfect Fit™ Plastic Gas Outlet Box

GSB-101

PART NUMBER DESCRIPTION

MSTR CTN

QTY

WITHOUT VALVE

OB-1200 White 10

All gas boxes are unassembled. Recessed construction eliminates line kinks. Reduced clearance from the wall keeps appliances out of the way. Finished, attractive installations. Includes mounting brackets and safety plug. Quarter Turn Ball Valve for easy shut-off. Valve is CSA and AGA approved.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

FOR IRON PIPE

GSB-101 White, 1/2" MIP x 1/2" FIP 10 GSB-201 White, 3/4" MIP x 3/4" FIP Valve 10 GSB-201-D 3/4" MIP x 3/4" FIP Valve, Deep 10 GSB-501 White, 1/2" MIP x 1/2" FIP Valve, Metal Outlet Box 10 GSB-601 White, 3/4" MIP x 3/4" FIP Valve, Metal Outlet Box 10

FOR CORRUGATED STAINLESS STEEL TUBING (CSST)

GSB-101-FX White, 1/2" Female x 1/2" Female Valve for CSST 10 GSB-501-FX White, Metal Outlet Box, 1/2" Valve 10

Add "-GP" to the end of the part number for Gas Pack (faceplates packaged separately)

Perfect Fit™ Plastic Gas Outlet Box

GSB-501

UTILITY & GAS OUTLET BOXES

Deep Gas Box

OB-1260

™

FireStop

Gas Box

GSFS-101

Utility box for gas supply. Deep box design keeps valve recessed and out of the way of appliances. Ideal for 3/4" valve applications.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

GAS OUTLET BOX

OB-1260 1/2" MIP x 1/2" FIP 10 OB-1261 3/4" MIP x 3/4" FIP 10 OB-1262 1/2" Valve for CSST* 10

Add "-GP" to the end of the part number for Gas Pack (faceplates packaged separately) * Adapter Sold Separately

The Industry’s best, compact, re-rated box available with gas valves for gas appliance applications. Box: 5-11/16" x 3-7/8" x 2-5/8". Faceplate: 5-1/4" x 7-1/4". 1 hour/2 hour re rating. Warnock Hersey listed 1hr and 2hr: ASTM E814, CAN/ULC S115, IAPMO/UPC Certied. Valve also meets or

exceeds: ASME A112.18.1, NSF Standard 61.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

GSFS-101 1/2" MIP x 1/2" FIP 10 GSFS-201 3/4" MIP x 3/4" FIP 10

FOR CORRUGATED STAINLESS STEEL TUBING (CSST)

GSFS-101-FX 1/2" MIP x 1/2" FIP 10

Add "-GP" to the end of the part number for Gas Pack (faceplates packaged separately) * Adapter Sold Separately

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

HAMMER ARRESTERS

Mini-Hammer Arrester

Polymer Mini Inline Hammer Arresters

Mini-Hammer Arrester

P-06390

Mini-Hammer Arrester

P-06396

Eliminates water hammer problems. AA size rating. Can be installed vertically or horizontally.

Machined ttings for superior quality. Spun copper top for unobtrusive, clean look. NSF compliant; UPC certied. No access panel required.

PART NUMBER DESCRIPTION

P-06379 1/2" Crimp PEX P-06389 1/2" Copper Sweat P-06390 1/2" CPVC P-06391 1/2" Male Sweat P-06392 3/4" Male Sweat P-06393 3/8" Crimp PEX tee P-06394 1/2" Crimp PEX tee P-06395 1/4" O.D. Compr. tee P-06396 3/8" O.D. Compr. tee P-06397 5/8" O.D. Compr. P-06399 3/4" F.G.H.T. x 3/4" M.G.H.T. P-06400 3/8" O.D. FEM x 3/8" O.D. Compr. P-06401 5/8" O.D. FEM x 5/8" O.D. Compr. P-06402 1/2" FEM Sweat x 1/2" Male Sweat P-06405 1/2" Uponor PEX tee (low lead) P-06363 3/4" CPVC

MSTR CTN

QTY

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

Mini-Hammer Arrester

P-06399

Mini Poly Hammer Arresters

Unlike Brass Hammer Arresters, the Polymer Mini Inline Hammer Arresters are made from the same

engineered polymer as PEX tting which is corrosion resistant, will never pit and is Lead Free Compliant.

Easy to install at any angle. No access panel or maintenance required. Perfect for dishwashers.

NSF/ANSI61

MSTR CTN

QTY

50 50 50

Lead Free

PART NUMBER DESCRIPTION

P-06406 1/2" Crimp PEX P-06407 1/2" Uponor PEX P-06408 1/2" Male CPVC

ASSE 1010 Certied

MINI-HAMMER ARRESTERS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Gas Outlet Box Valves

Gas Valve Fitting Adaptors

1/2" MIP X 1/2" FIP

Faceplate Replacements

P-06450

3/4" MIP X 3/4" FIP

P-06451

1/2" FIP X 1/2" FIP

P-06452

GAS OUTLET BOXES & FACEPLATES

Quarter-turn, angle valves CSA listed to standards ANSI Z21.15/CSA 9.1 for 1/2 PSIG working pressure and to standard ASME B16.44 for above ground piping systems up to 5 PSI working pressure.

PART NUMBER DESCRIPTION

WITHOUT VALVE

P-06450 1/2" MIP X 1/2" FIP 50 P-06451 3/4" MIP X 3/4" FIP 50 P-06452 1/2" FIP X 1/2" FIP 50

Gas valve tting adaptors allow connection between the gas valve to gas outlet boxes. Note: P-06050

is required for attachemnt

. ASTM B16 brass.

PART NUMBER DESCRIPTION

WITHOUT VALVE

P-06550 1/2" FIP X 1/2" MIP 135 P-06551 3/4" FIP X 3/4" MIP 135

MSTR CTN

QTY

MSTR CTN

QTY

GAS OUTLET BOX VALVES

Faceplate Replacement

P-00961

ANSI Z21.15-2009/CSA 9.1-2009 ANSI Z21.15a-2012/CSA 9.1a-2012 ANSI Z21.15b-2013/CSA 9.1b-2013

CGA Req. CR91-002-1995, ASME B16.44-2012

CSA Class 3371 08, 3371 88, 3371 12, and 3371 92

Compliances/Listings:

Standard faceplate constructed of high-impact plastic; 5/8" depth. Deep plastic faceplate accommodates two 1/2" thicknesses of drywall or up to 1" thick plaster; 1-1/4" depth.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

WASHING MACHINE

P-00213 White, for FireStop P-00910 White, for Kahuna OB-781 White, for Tornado* 50 OB-900 Beige, for Switch Hitter OB-901 White, for Switch Hitter

™

100

100 OB-902 Beige, for Switch Hitter® (Deep) 100 OB-903 White, for Switch Hitter® (Deep) 100 P-4163 White, for Metal WMOB, 20 Gauge 100

ICE MAKER

P-00908 White, for Mini Ice Maker 20 P-00805 White, for FireStop

™

40 OB-904 Beige, for Standard 100 OB-905 White, for Standard 10 P-4164 White, for Metal IMOB, 20 Gauge 200

UTILITY

P-00961 White AAV Wall Box Louver Faceplate 10

* Includes mounting brackets

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

AIR ADMITTANCE VALVES

Durgo Air Admittance Valves

Faster. Better. Smarter.

Air Admittance Valves (AAV) provide an acceptable means for ventilating a plumbing drainage system without venting through the roof or to open atmosphere. AAVs ensure that no sewer gases or liquids will enter the building through the valve.

P-3703

P-3704

P-00961

P-3706

The AAV closes by gravity, sealing at zero-differential pressure and remains closed under positive internal pressure (back pressure). It opens under negative pressure to allow proper drainage to occur

without siphoning of xture traps.

AAVs are offered with adapters in three different sizes to handle all applications.

• Junior: Perfect for horizontal runs in residential applications.

• Senior: Great for stack or branch systems.

• US90 3": For large or commercial requirements.

• Wall Box and Louver offers a recessed clean look for AAVs in visible locations.

Code Approvals:

• Manufactured in compliance with ASSE 1051, ASSE 1050 (Except Durgo Jr.)

• Installation shall be in accordance with local code requirements

PART NUMBER DESCRIPTION

P-3700

P-3701

P-3702

P-3703

P-3704 Durgo US90 3" 12 OBAV-200 AAV Wall Box w/ Louver Faceplate 10

OBAV-3702

OBAV-3703

ACCESSORIES / REPLACEMENT PARTS

P-00961 White AAV Wall Box Louver Faceplate 1 P-3705 1-1/2" White ABS Adapter 1 P-3706 1-1/2" PVC Adapter 1 P-3707 Durgo Junior Frost Cap 1 P-3708 Durgo Senior Frost Cap 1 P-3709 Durgo US90 3" Frost Cap 1

Durgo Senior 1-1/2" - 2" w/ White ABS Adapter (20 DFU)

Durgo Senior 1-1/2" - 2" w/ PVC Adapter (20 DFU)

Durgo Junior 1-1/2" - 2" w/ White ABS Adapter (20 DFU)

Durgo Junior 1-1/2" - 2" w/ PVC Adapter (20 DFU)

AAV Wall Box w/ Louver Faceplate & Durgo Jr 1-1/2" - 2" w/ White ABS Adapter

AAV Wall Box w/ Louver Faceplate & Durgo Jr 1-1/2" - 2" w/ PVC Adapter

MSTR CTN

QTY

AIR ADMITTANCE VALVES

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

PIPESECURE™ BRACKETS

Copper Plated PipeSecure™ Brackets

Galvanized PipeSecure™ Brackets

P-1059

P-1060

P-1061

P-1062-26

P-1063

P-1065

P-1066

P-1071

Unique manufacturing process ensures a uniform copper coat for a superior sweating surface. Durable construction for maximum strength and easier handling.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

P-1059 20" Copper, 1/2" Holes 1-1/4" Wide 50

P-1060 20" Copper, 1/2" Extruded Holes 1-1/4"" Wide 50

P-1060-26 26" Copper, 1/2" Extruded Holes 1-1/4" Wide 50

P-1061 26" Copper, 1/2" Holes 1-3/4" Wide 50

P-1062 20" Copper, 1/2" & 3/4" Alternating Holes 50

P-1062-26 26" Copper, 1/2" & 3/4" Alternating Holes 50

P-1063 20" Copper, 3/4" Holes & 1" Alternating Holes 50

P-1063-26 26" Copper, 3/4" Holes & 1" Alternating Holes 50

P-1065

20" Copper, 1/2" Holes 2" Centers, 3/4" & 1" Holes on 4" Centers

P-1066 20" Copper, Extruded Half Holes, 1/2" & 3/4" Holes 50

P-1071

P-1072

1/2" x 9-1/2", Half Holes on 1" Centers, 3/4" on 2" Centers. Kits furnished w/ felt pad & SS Clamp 3" x 9-1/2", Half Holes on 1" center. Kits furnished w/ felt pad & SS Clamp

P-1073 5" x 6-3/4" Extruded, 1/2" and 3/4" Holes 50

BRACKETS

™

PIPESECURE

P-1072

P-1073

P-1074

P-1064

P-1067

P-1074 Closet Carrier Bracket 50

Sturdy, galvanized steel brackets with 1-3/8" keyed holes accommodate grommets for all pipe types,

including glueable CPVC grommets, as well as the PEX Elbow (P-2021). Multiple congurations for

all bracketing applications.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

P-1064 20" Galvanized, 1-3/8" Notched Holes 50

P-1067 26" Galvanized, 1-3/8" Notched Holes 25

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

HYCO STRAPS & COPPER STUB OUTS

Copper Stub Outs

Hyco Straps

P-1078-08

P-1078-20

P-8002

This versatile perforated, galvanized support bracket is perfect for securing the Pull Stop Box™ and/or drain box either vertically or horizontally.

PART NUMBER DESCRIPTION

P-1078-08* Hyco Strap 8" x 5/8" x 1/16" TBD

P-1078-20 Hyco Strap 20" x 5/8" x 1/16" 1000

*Hyco Straps Coming Summer 2017

Reduce installation time and cost with convenient, pre-formed copper stub outs and elbows. Accepts

sweat and compression valves. Available in multiple pipe types and congurations. Type L copper.

PART NUMBER DESCRIPTION MSTR CTN QTY

MSTR CTN

QTY

HYCO STRAPS & COPPER STUB OUTS

P-8003

P-8004

P-8006

P-8007

P-8014

P-8001 1/2" x 1/2" Copper Female Sweat, 6" Straight 50

P-8002 1/2" x 1/2" Crimp PEX, 6" Straight 50

P-8003 1/2" x 1/2" Sweat, 8" Elbow 50

P-8004 1/2" x 1/2 Female CPVC, 8" Elbow 50

P-8006 1/2" x 3/8" Crimp PEX, 8" Elbow 50

P-8007

P-8014 1/2" x 1/2" Crimp PEX, 8" Elbow 50

P-8103 1/2" x 1/2" Copper Sweat, 8" Elbow w/ Flange 50

P-8107 1/2" x 1/2" Lead-Free Uponor, 8" Elbow w/ Flange 50

P-8114 1/2" x 1/2" Crimp PEX, 8" Elbow w/ Flange 50

1/2" x 1/2" Lead-Free Uponor, 8" Elbow Lead Free Compliant

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

P-8114

PEX Elbow

P-2021

PEX ELBOWS

Easiest PEX elbow to install allows plumber to bend pipe and quickly clip elbow into a PipeSecure™ bracket. The bend support works with any 1-3/8" keyed holes bracket. The PEX Elbow can also be fastened directly to the stud or stacked when two or more are needed. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-2021 90

◦

For 1/2" & 3/8" PEX 50 500

MSTR CTN

QTY

PEX ELBOWS

Stacked PEX Elbows,

mounted to stud

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

PEX Elbows installed in

PipeSecure Bracket (P-1064)

Talon Clamp With Nail

Full Clamp With Nail

Single Nail Clamp

Multi-Fit Clamps

CLAMPS

Talon Clamp With Nail

Full Clamp With Nail

Constructed of high-impact plastic. Fast and easy to use. Pre-installed barbed nail prevents backout. Black in color.

PART NUMBER DESCRIPTION PARTS/BAG

P-40429 3/8" CTS 100 1000 P-40433 1/2" CTS 100 1000 P-40434 3/4" CTS 100 1000 P-40435 1" CTS 50 500 P-40436 1-1/4" CTS 25 250

Constructed of high-impact plastic. Fast and easy to use. Pre-installed barbed nail prevents backout. Isolates tube from surface to reduce noise and protect tube from errant nails. Black in color.

PART NUMBER DESCRIPTION PARTS/BAG

P-2070 1/2" CTS 100 1000 P-2071 3/4" CTS 50 500 P-2072 1" CTS 25 250

MSTR CTN

QTY

MSTR CTN

QTY

Single Nail Clamp

Multi Fit Joist Clamp

Constructed of high-impact plastic. Fast and easy to use. Pre-installed barbed nail prevents backout. Ribbed design completely encircles pipe. Use with copper, CPVC and PEX pipe. Beige in color. Patented design. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-2090 1/2" CTS 100 1500 P-2091 3/4" CTS 100 1000

Specially designed by contractors for contractors! Constructed of high impact plastic. Fast and easy to use. Ribbed design accommodates several pipe sizes. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

JOIST CLAMPS

P-2073 1/2", 3/4", 1" CTS 50 200 P-2074 1-1/4", 1-1/2" CTS 50 200 P-2098 Joist Marking Tool 1

RAFTER CLAMPS

P-2075 1/2", 3/4", 1" CTS 50 200 P-2076 1-1/4", 1-1/2" CTS 50 200

CTS: Copper Tube Size

MSTR CTN

QTY

MSTR CTN

QTY

CLAMPS

Multi Fit Rafter Clamp

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Flexi-Fin® Pipe Insulator For Wood & Metal Studs

Flexi-Fin® Insulating Suspension

Flexi-Fin® Pipe Clamp

Strut Clamp

Flexi-Fin® Pipe Insulator

Flexi-Fin

Insulating Suspension

FLEXI-FIN® CLAMPS

Features patented n design. Exterior ns securely fasten insulator to both wood and metal studs.

Ideal for potable and hydronic water systems. Secure copper, CPVC and PEX. Drill 1-3/8" hole. Beige in color. Patented design. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-2086 1/2" CTS 100 1000 P-2087 3/4" CTS 100 1000 P-2089 1" CTS 100 300

Features patented n design. High-ear design allows installation in hard-to-reach areas. Secures

copper, CPVC and PEX pipe to both wood and metal framework. Use in both residential and commercial construction. Beige in color. Patented design. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-2062 1/2" CTS 100 1000 P-2063 3/4" CTS 100 1000 P-2064 1" CTS 50 250 P-2056 1-1/4" CTS 50 800 P-2058 1-1/2" CTS 25 600 P-2060 2" CTS 25 300

MSTR CTN

QTY

MSTR CTN

QTY

CLAMPS

FLEXI-FIN

Flexi-Fin

Strut Clamp

Pipe Clamp

Patented n design. Secures copper, CPVC and PEX pipe to both wood and metal framework. Use in

both residential and commercial construction. Beige in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

MSTR CTN

QTY

P-2031 1/2" CTS 100 1000 P-2032 3/4" CTS 100 1000 P-2033 1" CTS 50 250 P-2025 1-1/4" CTS 50 800 P-2027 1-1/2" CTS 25 600 P-2029 2" CTS 25 300

Designed to work with channel bar. Completely encircles pipe. No tools needed for installation. Fits 1-5/8" track. Black in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

MSTR CTN

QTY

P-2041 1/2" CTS 50 1200 P-2042 3/4" CTS 50 900 P-2043 1" CTS 50 600 P-2044 1-1/4" CTS 50 600 P-2045 1-1/2" CTS 25 500 P-2046 2" CTS 25 300

CTS: Copper Tube Size

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Acousto® Lator

Acousto® Clamp

High-Ear Acousto® Clamp

Acousto® Pad

ACOUSTO® CLAMP SYSTEMS

Keeps pipes from touching noise-transmitting surfaces such as wood & metal studs. Features highimpact plastic construction with special acoustic lining. Fish hook lugs hold insulator securely in place. Drill 1-3/8" hole. For best results, use with PipeSecure

Acousto

Lator

Clamp

PART NUMBER DESCRIPTION PARTS/BAG

P-6301 1/2" CTS 25 500 P-6302 3/4" CTS 25 500

Special acoustic lining completely encircles pipe to insulate it and absorb noise vibrations. Secures water pipe to joists. Constructed of durable high-impact plastic.

PART NUMBER DESCRIPTION PARTS/BAG

P-6101 1/2" CTS 25 700 P-6102 3/4" CTS 25 400 P-6103 1" CTS 25 300 P-6104 1-1/4" CTS 25 300

™

Pipe Brackets.

MSTR CTN

QTY

MSTR

CTN QTY

High-Ear Acousto® Clamp

Acousto® Pad

High-ear design may be nailed to oor or ceiling joists or broken off during installation. Grooved body

allows attachment to ceiling joists using a clevis hanger. Features high-impact plastic construction with special acoustic lining.

PART NUMBER DESCRIPTION PARTS/BAG

MSTR CTN

QTY

P-6201 1/2" CTS 25 700 P-6202 3/4" CTS 25 500 P-6203 1" CTS 25 300 P-6204 1-1/4" CTS 25 300

Isolates pipe from surface contact with structure and dry wall. Use when installing pipe for shower

risers, for tub drops, and through nished walls.

PART NUMBER DESCRIPTION PARTS/BAG

MSTR CTN

QTY

P-6701 Acousto Pad 25 250

CTS: Copper Tube Size

ACOUSTO

CLAMP SYSTEM

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Acousto® Scutcheon

Acousto® Kit

Acousto® Scutcheon

Plastic Plumber’s Tape (Self-Dispensing Box)

Hang’Em® II Pipe Hanger

J-Hooks

ACOUSTO® CLAMP STYLE, HANG'EM™ & J-HOOKS

Supports water supply line nipples that protrude from wall. Provides an attractive cover plate. Prevents pipe from contacting wall board, plaster or paneling. Special acoustic lining absorbs noise vibrations. Made in the U.S.A.

PART NUMBER

DESCRIPTION PARTS/BAG

P-6401 1/2" Ivory 50 400 P-6410 1/2" Chrome 50 400

MSTR CTN

QTY

Acousto® Kit

P-6721

Acousto

Kit

P-6730

Self-Dispensing Box

Plastic Plumber’s Tape

KITS, PIPE HANGERS & J-HOOKS

ACOUSTO

Hang’Em® II Pipe Hanger

Choose from a variety of kits for sinks and toilet installations. All kits include 1/2" Acousto

Lator

20" or 26" bracket.

PART NUMBER

DESCRIPTION

MSTR CTN

QTY

P-6721 Sink/Lav 26" Bracket & 2 Each P-6301 (pg 25) 50 P-6730 Toilet 20" Bracket & 1 Each P-6301 (pg 25) 50 P-1064 20" Galvanized, 1-3/8" Notched Holes, Bracket Only 25 P-1067 26" Galvanized, 1-3/8" Notched Holes, Bracket Only 25

Provides maximum 100 lbs. tensile strength. 1/8" holes on 3/4" centers. Used to support potable water piping. Eliminates rust or electrolysis problems. Made in the U.S.A.

PART NUMBER

DESCRIPTION PARTS/BAG

MSTR CTN

QTY

P-1011 3/4" 100’ Roll 24

Replaces galvanized straps. Constructed of heat-resistant plastic. Fits all Schedule 40 DWV pipe sizes

up to 4" in diameter. Features adjustable zip-strap. "Triple-beam" yoke construction. 1/2" grade/ow

indicators allow more accurate installations. Ultrasonically welded. Patented design. Made in the U.S.A.

PART NUMBER

DESCRIPTION PARTS/BAG

MSTR CTN

QTY

P-1602 Hanger Kits 2' Rod & strap 25 25 P-1604 Hanger Kits, 4' Rod & strap 25 25 P-10132 Strap Only 25 25

J-Hook

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Strong and rigid I-Beam design. Supports drain-waste and vent piping from joists and rafters. Two captive nails and nail holes on all four sides. Made of corrosion-proof, high-impact ABS.

PART NUMBER DESCRIPTION PARTS/BAG

MSTR CTN

P-1610 1-1/2" w/ Nail 25 125 P-1612 White, 2" w/ Nail 25 125 P-1613 White, 3" w/ Nail 25 100 P-1614 White, 4" w/ Nail 25 75

QTY

GROMMETS, BOSS BAR™ & LEVER-LOCK

Grommets

Boss Bar™ Adjustable Bracket

Lever-Lock

™

Sized for metal studs or Galvanized PipeSecure Brackets. For use with Copper, PEX or CPVC.

PART NUMBER DESCRIPTION PARTS/BAG

FOR ALL PIPE TYPES

Grommets

P-2016

Grommets

P-2020

Boss Bar

P-1090

™

P-2016 Blue, 1/2" CTS 100 1000 P-2017 Blue, 3/4" CTS 100 1000 P-2018 Blue, 1" CTS 100 1000

FOR CPVC PIPING (GLUEABLE)

P-2019 White, 1/2" CTS 100 1000 P-2020 White, 3/4" CTS 100 1000

Our Boss Bar™ is a multipurpose, galvanized steel, adjustable sliding bracket designed to support all pipe types. Specially designed mounting ears allow attachment to wood, metal, steel or concrete. In side-by-side testing, the unique triangular design of the Boss Bar in strength. Our Flexi-Fin

™

and Acousto® pipe clamps easily attach with four self-tapping sheet metal

screws that are included with each bracket.

PART NUMBER DESCRIPTION

P-1090 10" Adjustable Sliding Bracket 50 P-1093 13" Adjustable Sliding Bracket 50

™

MSTR CTN

QTY

™

easily surpasses similar brackets

GROMMETS, BOSS BAR

MSTR CTN

QTY

Boss Bar

P-1093

Lever Lock

P-2001

™

& LEVER-LOCK

Lever-Lock™ easily clamps down on any 1/2" pipe. Great for securing stub outs. No more soldering copper elbows when running PEX systems. Snaps easily into any 1-3/8" notched hole. Mounting ears allow for mounting directly to a stud. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

™

P-2001 Lever-Lock Clamp, 1/2" 25 500

MSTR CTN

QTY

™

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Plasti-Sleeve Pipe Protector

Tub Boxes

PLASTI-SLEEVE PIPE PROTECTORS & TUB BOXES

For use with copper, PEX, CPVC, and ABS/PVC, as listed below. Economical and efcient. Protects

1/2", 3/4", 1" and 2" pipe during installation. Flexible material forms a seal around pipe in concrete. Packaged in self-dispensing box. 180° F maximum. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

FOR USE WITH ALL PIPE MATERIAL, INCLUDING CPVC (POLYETHYLENE)

P-3013 1" Red / 4 mil 200' Roll 20 P-3014 1" Black / 4 mil 200' Roll 20 P-3015 1" Blue / 4 mil 200' Roll 20 P-3016 2" Blue / 4 mil 200' Roll 8 P-3020 1" Clear / 4 mil 200' Roll 20

FOR USE WITH ALL PIPE MATERIAL, EXCEPT CPVC

P-3044 2" Blue / 27 mil 50' Roll 1 P-3045 2" Red / 27 mil 50' Roll 1 P-3046 3/4" Blue / 27 mil 50' Roll 1 P-3047 3/4" Red / 27 mil 50' Roll 1 P-3048 1" Blue / 27 mil 50' Roll 1 P-3049 1" Red / 27 mil 50' Roll 1

MSTR CTN

QTY

Patented, improved closure makes assembly a snap. More pipe knockouts - 10 total, compatible with 1-1/2" and 2" pipe. Angled corner increases versatility. Zip ties included for rebar anchoring. High-

impact injection molded plastic. Use in concrete slabs, wood oors and multi-story ooring. Made in

the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-3000 14-7/8" x 14-7/8" x 7" Deep 5 Pair

Right-Tite® II Tub Box

P-3000

Tub boxes by Benjamin Mfg. Constructed of high impact plastic. Will not fall apart when exposed to rain or water. Easily cut with utility knife for openings. Rodent proof. Can be used individually or in pairs.

PART NUMBER DESCRIPTION

PLASTI-SLEEVE PIPE PROTECTORS & TUB BOXES

Plastic Tub Box by Benjamin

1313

1313 13" x 13" x 7" Deep 1410 12" x 8" x 6" Deep

MSTR CTN

QTY

MSTR CTN

QTY

12 36

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Light Pour Time-Savers Stokes™ Tub Dam

Sure-Sleeve® Plastic Hole Form

Multi-Purpose Pipe Holder

GROUNDWORK ITEMS

Light Pour Time-Savers Stokes™ Tub Dam

P-3092

Sure-Sleeve® Plastic Hole Form

Single piece construction cans out tub cavity for waste and overow connection. Made in the U.S.A.

PART NUMBER DESCRIPTION

P-3092 1-1/2" Height 25

Use vertically and horizontally for both oor and wall installations. For use in electrical, mechanical and

plumbing installations and concrete casting applications. Stackable feature allows extension to higher elevations. Height - 8". Patented design. NOTE: Use 1 size larger than pipe size. Made in the U.S.A.

PART NUMBER DESCRIPTION

P-3050 1-1/2" 1°- 3° Taper 120 P-3051 2" 3° Taper 90 P-3060 3" 3° Taper 80 P-3061 4" 3° Taper 45 P-3062 5" 3° Taper 30 P-3063 6" 3° Taper 24 P-3064 8" 3° Taper 36 P-3056 10" 1° Taper 12 P-3057 12" 1° Taper 12

MSTR CTN

QTY

MSTR

CTN QTY

Multi-Purpose Pipe Holder - PVC

Multi-Purpose Pipe Holder - ABS

Secures pipe to forms during the concrete pour. Scored tail piece snaps off when stripping from boards. Solvent cements to pipe. Made of high-impact plastic. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-1039 1-1/2" - 2" PVC 50 500 P-1040 3" - 4" PVC 25 300 P-1009 1-1/2" - 2" ABS 50 500 P-1010 3" - 4" ABS 25 300

MSTR CTN

QTY

GROUNDWORK ITEMS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Inset Plug On

Cap On

Slip On

Cap All

Inset Plug On

Cap On

TEST CAPS & PLUGS

Designed for ABS or PVC Schedule 40 DWV pipe. Hinged knockouts prevent center from falling into pipe. Constructed of high-impact plastic. White in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-0002 1-1/2" 100 1000 P-0003 2" 100 1000 P-0004 3" 50 500 P-0005 4" 25 200 P-0006 6" 10 200

Designed for ABS or PVC Schedule 40 DWV pipe and ttings. Hinged knockouts prevent center from

falling into pipe. Constructed of high-impact plastic. White in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-0014 1-1/2" 100 1600 P-0015 2" 100 1600 P-0016 3" 50 700 P-0017 4" 25 250

MSTR CTN

QTY

MSTR CTN

QTY

Slip On

TEST CAPS & PLUGS

Cap All

"Friction-hold" test cap for one story testing. Designed for ABS or PVC Schedule 40 DWV pipe and

ttings. No solvent cementing required; cap slips over end of pipe or inserts into ttings. Orange in

color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-0018 1-1/2" 50 900 P-0019 2" 50 600 P-0020 3" 20 280 P-0021 4" 10 150

Use above or below ground to test ABS, PVC Schedule 40 DWV, steel, cast iron or copper pipe. Reusable for greater economy. Features all-stainless-steel band and screw. Black in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-0029 1-1/2" 50 50 P-0030 2" 50 50 P-0031 3" 25 25 P-0032 4" 25 25 P-0038 5" 25 25 P-0039 6" 20 20 P-0040 8" 15 15

MSTR CTN

QTY

MSTR CTN

QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

End Cap

Wing Nut Plug

Expansion Dollar Plug

TEST CAPS & PLUGS

End Cap

PVC

End Cap

ABS

Heavy-duty design has been tested to 100 PSI. Solvent cements to pipe. Offers an economical alternative to conventional Schedule 40 DWV test caps. PVC: White in color. ABS: Black in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

PVC

P-0071 1-1/2" PVC 100 2000 P-0072 2" PVC 100 1200 P-0073 3" PVC 25 500 P-0074 4" PVC 25 400

ABS

P-0075 1-1/2" ABS 100 2000 P-0076 2" ABS 100 1200 P-0077 3" ABS 25 500 P-0078 4" ABS 25 400

MSTR CTN

QTY

Wing Nut Plug

Expansion Dollar Plug

For testing all plastic, cast iron and DWV soil pipes. No tools required; extra large wing nut makes

it easy to hand tighten. Reusable for greater economy. Built-in hose connection. Blue and orange in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-0033 1-1/2" 10 100 P-0034 2" 10 100 P-0035 3" 10 50 P-0036 4" 5 25 P-0037 6" 5 40

For testing all plastic, cast iron and DWV pipes. No tools required; extra large wing nut makes it easy

to hand tighten. Reusable for greater economy. Blue and orange in color. Made in the U.S.A.

PART NUMBER DESCRIPTION PARTS/BAG

P-0044 1-1/2" 10 120 P-0045 2" 10 100 P-0046 3" 10 50 P-0047 4" 5 25

MSTR CTN

QTY

MSTR CTN

QTY

TEST CAPS & PLUGS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Access Panels - Plastic

Access Cover - Plastic

ACCESS PANELS & COVERS

Provides access to pumps on whirlpools and spas, tub/shower valve bodies, hidden shut off or regulating valves, trap primers, clean outs, etc. Made in the U.S.A.

• Nothing to wear out • White

• No snaps • Beveled edge

• No screws • Textured finish

• No hinges • Can be painted

• No springs • High impact plastic

Access Panels - Plastic

Access Cover - Plastic

ACCESS PANELS, COVERS & DOORS

PART NUMBER

SIZE I.D.

W x H

SIZE O.D.

W x H

MSTR CTN

AP55 4.75" x 4.75" 7.5" x 8" 12 AP88 8" x 7.875" 11.75" x 11.75" 12 AP96 9.125" x 6.125" 12.375" x 9.5" 12 AP1212 11.375" x 11.25" 14.75" x 14.625" 12 AP1414 13.35" x 13.25" 16.75" x 16.625" 12 AP1426 13" x 25.625" 16.75" x 29.5" 12

• An inexpensive way to cover an access panel

• Pre-drilled holes in corners

• Textured finish for easy painting

• High impact plastic material

• Made in the U.S.A.

PART NUMBER

SIZE O.D.

W x H

MSTR CTN

ACF-1212 12" x 12" 20 ACF-1717 17" x 17" 20

QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Cleanout Cover Plates

CLEANOUT COVERS

Flat White

Flat Chrome

Bell White

• Available in chrome/matte finish (stops unsightly scratches & marks) or pure white/matte finish (paintable)

• Made of durable, high-impact plastic (will not rust or corrode)

• Provided with #14 screw (easy installation into plastic plug)

• Each cover plate is individually bagged

• High quality

• Inexpensive

• Made in the U.S.A.

PART NUMBER DESCRIPTION FINISH

MSTR CTN

QTY

FLAT CLEANOUT COVER PLATES - FOR USE WHEN CLEANOUT IS WITHIN WALL CAVITY

R-1538* 4-1/2" Flat Chrome 20 104FC 4-1/4" Flat Chrome 25 105FC 5-1/4" Flat Chrome 25 107FC 7-1/4" Flat Chrome 25 109FC 9-1/4" Flat Chrome 10 104FW 4-1/4" Flat White 25 105FW 5-1/4" Flat White 25 107FW 7-1/4" Flat White 25 109FW 9-1/4" Flat White 10 R-1278* 4-1/2" Flat Unplated 20 R-1279* 5-1/2" Flat Unplated 20

BELL CLEANOUT COVER PLATES - FOR USE WHEN CLEANOUT FITTING EXTENDS OUTSIDE WALL CAVITY

104BC 4-1/4" Bell Chrome 25 105BC 5-1/4" Bell Chrome 25 107BC 7-1/4" Bell Chrome 25 109BC 9-1/4" Bell Chrome 10 104BW 4-1/4" Bell White 25 105BW 5-1/4" Bell White 25 107BW 7-1/4" Bell White 25 109BW 9-1/4" Bell White 10

* Not Made in the U.S.A.

CLEANOUT COVERS

Bell Chrome

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Foam Spacer

In-Sul Wrap

Handi-Cap Wrap Multi-Purpose Foam Tape

FS44

In-Sul Wrap

6200

SPACERS, IN-SUL WRAP & FOAM TAPE

• Easily installed

• Keeps concrete from pipe

• Replaces Styrofoam, coffee can and duct tape

• Great labor save – eliminates need to chip out concrete

PART NUMBER DESCRIPTION

FS44 4" High 4" x 6" 60

• EASIER to install than berglass

• FASTER to install than duct tape

• COST of material is far below that of duct tape or berglass

• IN-SUL WRAP can be pinned with nails or taped for fast securing

• IN-SUL WRAP will conform to ttings and pipe using far less material compared to other wraps

• INSULATION FACTOR 0.75 per wrap

PART NUMBER DESCRIPTION

6200 3/32" x 6" x 200' 5

MSTR CTN

QTY

MSTR CTN

QTY

SPACERS, IN-SUL WRAP & FOAM TAPE

Handi-Cap Wrap

HCW24

• A closed polyethylene foam specically designed for wrapping traps and supplies in public restroom,

pipe wrap, etc.

• Pressure sensitive adhesive backing

• Full 2" adhesive coverage (will not curl)

• Installs quickly and easily

• Multi-Use / Insulation

• White color for pleasing appearance

• Meets ADA requirements

• Made in the U.S.A.

PART NUMBER DESCRIPTION

HCW24 0.125" x 2" x 40' Roll 24

MSTR CTN

QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Tote Trays / Organizers

Chemical Tray

Saddle Tray

ORGANIZATIONAL TRAYS

Chemical Tray

T1040

Saddle Tray

T1065

Tote Tray

T1000

• Don’t let your chemicals freeze in the winter weather

• Organize your chemicals to quickly transport on site or inside at night

• Carrier holds combinations of half pint, pint and quart cans

• Made in the U.S.A.

PART NUMBER DESCRIPTION

MSTR CTN

T1040 13" x 10.5" x 2.75" 5

• Tray and lid made of high density polyethylene

• Will not rust or corrode

• Acids, harsh chemicals and oils will not harm

• Glue will not stick to them

• Will withstand temperature from 250°F to minus 40°F

• Reinforced handle

• Snap on lid to keep parts and tools clean and dry

• Six removable dividers for compartment preference

• Sits on 2" x 4", 2" x 6" etc.

• Made in the U.S.A.

PART NUMBER DESCRIPTION

MSTR CTN

T1065 22" x 14" x 8" High w/ Lid 5 T1065-L Lid 1 T1065-XD Dividers 1

QTY

ORGANIZATIONAL TRAYS

Tote Tray

T1025

Tote Tray

T1050

Tote Tray

T1075

All trays are made of high density polyethylene. They will not rust or corrode and acids, harsh chemicals and oils will not harm them. Glue will not stick to them and they will withstand temperatures from 250°F to minus 40°F. These trays are great truck organizers and have incredible industrial strength reinforced handles. Made in the U.S.A.

T1000: Tray can be divided into compartments as small as 4.5"x 1.5". Tray comes with four dividers. Extra dividers are available at extra cost.

T1025: Deep handy carrier with extra duty handle. Does not have dividers like other models.

T1050: Tray can be divided into the same size compartments as T1000 tray, except 5" in depth. Tray

comes with four dividers. Extra dividers are available at extra cost.

T1075: Just the right tray for carrying longer tools and bulky parts such as copper or galvanized

ttings. This also makes an excellent nail box. Can be divided into 8 compartments 6"x 5"x 6" deep.

Comes with four dividers.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

T1000 15" x 9" x 3" 10 T1000-XD T1000 Dividers 1 T1025 16-3/4" x 11-3/4" x 4-1/2" 5 T1050 15" x 9" x 5" 10 T1050-XD T1050 Dividers 1 T1075 24" x 12" x 6" 5 T1075-XD T1075 Dividers 1

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Nipple Caddies

Dirt Rider

Ladder Ledge

Nipple Caddy

T1007

NIPPLE CADDIES, DIRT RIDER & LADDER LEDGE

• Made of high density polyethylene

• Will withstand harsh chemicals, acids and oils

• Will not rust or corrode or cause nipples to rust

• When bent or crushed, will spring back into shape leaving no permanent damage

• Great in cold weather (material tested to minus 40°F)

• Drain holes in bottom lets caddy drain

• Strong enough to take abuse yet half the weight of metal

• Bottom design holds nipples up and keeps them out of water and other liquids

• Perfect for every plumber’s truck

• Made in the U.S.A.

Nipple Caddy

T1015

Nipple Caddy

T1057

NIPPLE CADDIES, DIRT RIDER & LADDER LEDGE

PART NUMBER

T1005 1/2" 11-1/4" x 7-3/4" x 8-3/4" Tall 4 T1007 3/4" 13-3/4" x 8" x 8-3/4" Tall 4 T1010 1" 15-1/4" x 8-1/4" x 8-3/4" Tall 4 T1015 1-1/2" 21-1/4" x 7-1/4" x 9-3/4" Tall 2 T1020 2" 23-1/2" x 8-3/4" x 10-1/2" Tall 2 T1057 1/2" / 3/4" Combo 18-1/2" x 8-1/4" x 8-3/4" Tall 4

No more dragging tool boxes and parts through the dirt! Take all the tools and parts in one trip.

• Constructed of high molecular weight polyethylene

• Use by itself for tools and parts or snap on the popular Benjamin T1075 tote tray

• Glides over dirt on two runners

• Comes with a 6 ft. rope

• Easy to clean, simply hose off

• Made in the U.S.A.

PART NUMBER DESCRIPTION

T1075-DR 29" x 14" x 3-1/2" 5 T1075-DRTT 29" x 14" x 7" (w/ T1075 Tote Tray) 1

NIPPLE SIZE OUTSIDE DIMENSION

MSTR CTN

QTY

Dirt Rider T1075-DR

• Keeps parts & tools within easy reach when working off a ladder

• Fits most OSHA approved step ladders

• T1050 tote tray can easily be removed from T1050 Ladder Ledge

• Will not rust or corrode

Ladder Ledge

T1050-LL

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

• Great for holding parts, tools, chemicals, etc.

• Made in the U.S.A.

PART NUMBER DESCRIPTION

T1050-LL 10" x 11" x 6" 5 T1050-LLTT 12" x 16" x 10" (w/ T1050 Tote Tray) 1

MSTR CTN

QTY

Water Heater Pan - Plastic

WATER HEATER & WASHING MACHINE PANS

Washing Machine Pan

• Recommended and installed by the leading plumbing contractors

• Protects against water damage caused when water heaters start leaking

• Simple to install – Just set water heater into pan when installing

• Available with or without a drain hole in the side

• Pans come with a 1" drain adapter tting

• Pans without drain holes can be drilled in the eld to allow custom placement for drain

in side or bottom of pan

Water Heater Pan – Plastic

• Will not rust or corrode

• Round design enables pan to be installed in small areas

• Comes in seven nominal sizes (19" - 20" - 22" - 24" - 26" - 28" - 30")

• Made in the U.S.A.

Water Heater Pan – Undrilled

PART NUMBER DESCRIPTION

DRILLED

WHP19-1D 19" I.D. Drilled 20 WHP20-1D 20" I.D. Drilled 20 WHP22-1D 22" I.D. Drilled 20 WHP24-1D 24" I.D. Drilled 20 WHP26-1D 26" I.D. Drilled 20 WHP28-1D 28" I.D. Drilled 20 WHP30-1D 30" I.D. Drilled 6

UNDRILLED

WHP19-1U 19" I.D. Undrilled 20 WHP20-1U 20" I.D. Undrilled 20 WHP22-1U 22" I.D. Undrilled 20 WHP24-1U 24" I.D. Undrilled 20 WHP26-1U 26" I.D. Undrilled 20 WHP28-1U 28" I.D. Undrilled 20 WHP30-1U 30" I.D. Undrilled 6

ADAPTER

SPF-100 1" Adapter 1

MSTR CTN

QTY

WATER HEATER & WASHING MACHINE PANS

Washing Machine Saf-T-Pan

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Why have a leaking or overflowing washer ruin the floor?

• Made of heavy gauge high-impact plastic

• Pan will not rust or corrode

• Available with or without a drain hole in the side

• Pans come with 1" drain adapter fitting

• Different model number for each option make it easy to get the pan you want

• Pans without drain holes can be drilled in the field to allow custom placement of drain in side or bottom of pan

• Made in the U.S.A.

• O.D. Dimensions (outside at top of pan): 32-1/2" x 30-3/4" x 2-1/4"

• I.D. Dimensions (inside at bottom of pan): 30" x 28" x 1-3/4"

PART NUMBER DESCRIPTION

WMSP-1U 29" x 27" Undrilled 10 WMSP-1D 29" x 27" Drilled 10

MSTR CTN

QTY

Foam Bottom

Tub Protectors

Flex Poly

Custom & Oversized Tub Protectors

Multi-Fit Shower Base Protector

TUB PROTECTORS

The Original Patented Foam Based Tub Protector. An Inexpensive Way to Protect Your Valuable Tub.

• Made of heavy gauge high-impact plastic

• Soft foam bottom grips tub surface to protect nish from the abrasive action resulting from a

protector moving under workman’s feet

• No set up or assembly time as you just pull out of the box and drop it into the tub

• Nest together for space-saving storage

• Most durable protectors yet, can often be reused

• Fits both left and right-hand drain tubs

• Larger sizes are available and we can make custom t protectors for larger jobs

• Made in the U.S.A.

PART NUMBER DESCRIPTION

FOAM BOTTOM TUB PROTECTORS

TP6030-14 60" x 30" x 14" 35 TP6030-16 60" x 30" x 16" 35 TP6042-16 60" x 42" x 16" 25 TP6030-14-B BULK 315 TP6030-16-B BULK 315

NO FOAM BOTTOM TUB PROTECTORS

TP6030-14-NF 60" x 30" x 14" 35 TP6030-16-NF 60" x 30" x 16" 35 TP6042-16-NF 60" x 42" x 16" 25 TP6030-14-NF-B BULK 315 TP6030-16-NF-B BULK 315

MSTR CTN

QTY

Multi-Fit Shower Base Protector

SBP-6036MF

TUB PROTECTORS

Flex Poly

SBP-6036MF fits 9 sizes of shower bases Use right out of the box for 60" x 32", 60" x 34", 60" x 36" bases -orCut off small end on left side for use in 48" x 32", 48" x 34", 48" x 36" bases -orCut off large end on right side for use in 36" x 32", 36" x 34", 36" x 36"

• Made of high impact plastic with foam pad bottom. Foam pad grips the shower base to protect finish from abrasive action.

• Nest together for space saving storage. Fits left hand, right hand or center drain pans.

• Made in the U.S.A.

PART NUMBER DESCRIPTION

SBP-6036MF 58" x 35" x 3" 50

Allows you to get tub protection even on small jobs. Now you can order as few as one tub protector at a time.

• Made of exible poly to resist mud, dirt and paint. Foam bottom to prevent scratching and abrasion.

• Folds to a carton size of 19"x 8"x 19". Comes in over 100 different shapes and sizes.

• Made in the U.S.A. Add "-FP" to the end of the part number for Flex Poly.

MSTR CTN

QTY

Custom Tub Protectors

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Now offering custom and oversized protectors in hundreds of styles. Please use Custom Tub Protector order form on following page.

CORNER TUBS, ROUND TUBS, OVAL TUBS, RECTANGLE TUBS, HOUR GLASS TUBS, KOHLER, JACUZZI, AMERICAN STANDARD, AND MANY OTHER MANUFACTURERS

CUSTOM TUB PROTECTOR ORDER FORM

Custom Tub Protector Order Form

Help us to provide you with the best Tub Protector option available.

Fill out the following form and fax it to us at (800) 243-1777 or (775) 884-4343.

OVER 100 MODELS AVAILABLE! Available with Foam Pad bottom for optimum protection. Foam Pad grips the tub to protect

nish from the abrasive action resulting from the protector grinding under workman’s feet. Made of high-impact plastic with over 250% more

material than standard tub protectors. Special thicknesses and/or special application materials available. Available in standard box quantities or in bulk/pallets. Pallets are great for use on jobs or for handling and storage purposes in a warehouse. Simply place in tub and remove

once job is nished. No time consuming application and removal of tapes or adhesives.

CUSTOM TUB PROTECTOR ORDER FORM

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

TABLE OF CONTENTS

Aqua-Flo® has been part of the LSP family for over 20 years. As the innovation and quality standard bearer in water

connectors and valves, Aqua-Flo’s

performance and durability is unmatched in the market place. Aqua-Flo® developed the

majority of the connectors available to the plumbing industry today. It introduced stainless steel braided connectors to the

U.S. It developed the rst NSF certied connector liner with its patented Ultracore

tubing to resist attacks to the connector liner from chemicals found in most modern potable water systems. As we continue to push the technological envelope on new materials, LSP has developed better and tougher corrugated stainless and copper water heater connectors.

Pull Stop Boxes™ & Accessories ................................................................41-44

Quarter Turn Ball Valves ................................................................................. 45

Hose End Fitting Guide & Glossary ................................................................ 46

Aqua-Flo® Product Guide ................................................................................ 47

Flex Arrester™ Connectors .............................................................................. 48

Polymer Push On Valves (PV) ......................................................................... 49

TABLE OF CONTENTS

Water Heater Connectors ..........................................................................50-51

Faucet Connectors .....................................................................................52-53

Toilet Connectors .......................................................................................54-55

Washing Machine & Ice Maker Connectors .................................................... 56

Dishwasher Connectors .................................................................................. 57

Specialized Connectors .................................................................................. 58

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Pull Stop Box™ For Lavs/Toilets, Sinks & Dishwashers

FireStop™ Pull Stop Box

™

PULL STOP BOX™

Pull Stop Box™ Tools

Crimp PEX Pull Stop Box

OBPS-103-RK-LL

The Pull Stop Box™ takes the hassle out of angle stop installation by eliminating the need to stub out.

Moving the angle stop into the wall provides a sleek and sophisticated nished look. The decorative knob controls the ow of water to the supply line by actuating the valve in a push/pull motion. The valve

can be easily replaced if needed.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

ROUGH-IN KITS-INCLUDES BOX, VALVE AND PROTECTIVE COVER

OBPS-101-RK-LL 1/2" Male Copper Sweat, Lead Free 10 OBPS-102-RK-LL 1/2" Male CPVC, Lead Free 10 OBPS-103-RK-LL 1/2" Crimp PEX, Lead Free 10

™

OBPS-104-RK-LL 1/2" Uponor PEX, Lead Free 10

Lead Free

NSF/ANSI 61

Crimp PEX FireStop™ Pull Stop Box

OBFPS-103-RK-LL

OBPS-TOOL-2

OBPS-TOOL-1

™

OBPS-TOOL-3

The FireStop™ Pull Stop Box™ is constructed of re resistant ABS with a factory mounted intumescent

pad. The OBFPS series are Warnock Hersey certied to ASTM E-814 and CAN/ULC S115 with 1 hour

and 2 hour listings. Suitable for wood or metal studs and for all pipe types.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

ROUGH-IN KITS-INCLUDES BOX, VALVE AND PROTECTIVE COVER

OBFPS-101-RK-LL 1/2" Male Copper Sweat, Lead Free 10

OBFPS-102-RK-LL 1/2" Male CPVC, Lead Free 10

OBFPS-103-RK-LL 1/2" Crimp PEX, Lead Free 10

OBFPS-104-RK-LL 1/2" Uponor PEX, Lead Free 10

Lead Free

NSF/ANSI 61

Cost effective tools specically designed to help tighten hoses onto the Pull Stop Box™ valve no matter

how tight the installation. Follow hose manufacturers' instructions on how tight to make the hoses.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

PULL STOP™ BOX TOOLS

OBPS-TOOL-1

OBPS-TOOL-2

3/8" Comp, Sheet Metal. Wrench to tighten Toilet, Faucet and Diswasher Pull Stop Boxes

1/4" Comp, Sheet Metal. Wrench to tighten all Ice Maker Pull Stop Boxes

™

3000

3/8" Comp, Drop Forged. Extremely durable

OBPS-TOOL-3

wrench to tighten all Toilet, Faucet and Dishwasher Pull Stop Boxes

™

3000

PULL STOP BOX

™

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

FireStop™ Ice Maker Pull Stop Box

™

Ice Maker Pull Stop Box

™

Copper Sweat Ice Marker Pull Stop Box

Pull Stop Box™ Tools – See Page 41

OBPS-111-RK-LL

PULL STOP BOX™

The Ice Maker Pull Stop Box™ provides a sleek and sophisticated nished look. The decorative knob controls the ow of water to the supply line by actuating the valve in a push/pull motion. The box is strong, compact and cost-efcient.

PART NUMBER DESCRIPTION

ROUGH-IN KITS-INCLUDES BOX, VALVE AND PROTECTIVE COVER

OBPS-111-RK-LL 1/2" Male Copper Sweat, Lead Free 10

OBPS-112-RK-LL 1/2" Male CPVC, Lead Free 10

OBPS-113-RK-LL 1/2" Crimp PEX, Lead Free 10

™

OBPS-114-RK-LL 1/2" Uponor PEX, Lead Free 10

Lead Free

MSTR CTN

QTY

NSF/ANSI 61

Crimp PEX FireStop

PULL STOP BOX™

Ice Maker Pull Stop Box

OBFPS-113-RK-LL

OBPS-TOOL-2

The FireStop™ Ice Maker Pull Stop Box™ is constructed of re resistant ABS with a factory mounted

intumescent pad. The OBFPS series are Warnock Hersey certied to ASTM E-814 and CAN/ULC

S115 with 1 hour and 2 hour listings. Suitable for wood or metal studs and for all pipe types.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

ROUGH-IN KITS-INCLUDES BOX, VALVE AND PROTECTIVE COVER

OBFPS-111-RK-LL 1/2" Male Copper Sweat, Lead Free 10

OBFPS-112-RK-LL 1/2" Male CPVC, Lead Free 10

OBFPS-113-RK-LL 1/2" Crimp PEX, Lead Free 10

OBFPS-114-RK-LL 1/2" Uponor PEX, Lead Free 10

™

Lead Free

NSF/ANSI 61

OBPS-TOOL-1 OBPS-TOOL-3

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

PULL STOP BOX™

Washing Machine Pull Stop Box

™

FireStop™ Washing Machine Pull Stop Box

™

Pull Stop Box™ Tools – See Page 41

The Washing Machine Pull Stop Box™ provides a sleek and sophisticated nished look. The decorative

knob controls the ow of water to the supply line by actuating the valve in a push/pull motion. The boxes

are strong and compact with an adjustable layout.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

ROUGH-IN KITS-INCLUDES BOX, VALVE AND PROTECTIVE COVER

OBPS-121-RK 1/2" Male Copper Sweat 10

OBPS-122-RK 1/2" Male CPVC 10

OBPS-123-RK 1/2" Crimp PEX 10

OBPS-124-RK 1/2" Uponor PEX 10

Copper Sweat Washing Machine Pull Stop Box

OBPS-121-RK

Crimp PEX FireStop™

Washing Machine Pull Stop Box

OBFPS-123-RK

™

ROUGH-IN KITS WITH HAMMER ARRESTER - INCLUDES TWO BOXES, VALVES, PROTECTIVE COVERS, DRAIN BOX

OBPS-121-RK-KIT 1/2" Male Copper Sweat 5

OBPS-122-RK-KIT 1/2" Male CPVC 5

OBPS-123-RK-KIT 1/2" Crimp PEX 5

OBPS-124-RK-KIT 1/2" Uponor PEX 5

OBPS-122-RK-KIT-HA 1/2" Male CPVC w/ Hammer Arrester 1

OBPS-123-RK-KIT-HA 1/2" Crimp PEX w/ Hammer Arrester 1

OBPS-124-RK-KIT-HA 1/2" Uponor PEX w/ Hammer Arrester 1

NSF/ANSI 61

The FireStop™ Washing Machine Pull Stop Box™ is constructed of re resistant ABS with a factory mounted

intumescent pad. The OBFPS series are Warnock Hersey certied to ASTM E-814 and CAN/ULC S115

with 1 hour and 2 hour listings. Suitable for wood or metal studs and for all pipe types.

PART NUMBER DESCRIPTION

MSTR CTN

ROUGH-IN KITS-INCLUDES BOX, VALVE AND PROTECTIVE COVER

OBFPS-121-RK 1/2" Male Copper Sweat 10

OBFPS-122-RK 1/2" Male CPVC 10

OBFPS-123-RK 1/2" Crimp PEX 10

OBFPS-124-RK 1/2" Uponor PEX 10

ROUGH-IN KITS-INCLUDES TWO BOXES, VALVES, PROTECTIVE COVERS, DRAIN

OBFPS-121-RK-KIT 1/2" Male Copper Sweat 5

OBFPS-122-RK-KIT 1/2" Male CPVC 5

OBFPS-123-RK-KIT 1/2" Crimp PEX 5

OBFPS-124-RK-KIT 1/2" Uponor PEX 5

OBFPS-122-RK-KIT-HA 1/2" Male CPVC w/ Hammer Arrester 1

OBFPS-123-RK-KIT-HA 1/2" Crimp PEX w/ Hammer Arrester 1

OBFPS-124-RK-KIT-HA 1/2" Uponor PEX w/ Hammer Arrester 1

QTY

PULL STOP BOX™

OBPS-TOOL-2

OBPS-TOOL-1

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

OBPS-TOOL-3

NSF/ANSI 61

PULL STOP BOX™ TRIM KITS & ACCESSORIES

Trim Kits

Pull Stop Box™ Accessories/Replacement Parts

Drain Box

Trim Kit

OBPS-200-W

Oil-Rubbed Bronze Trim Kit

OBFPS-200-ORB

Pull Stop Box™ Trim Kit

OBPS-400-W

TRIM KITS & ACCESSORIES

™

Escutcheon Extension Ring

P-06923

Deep Trim Kit

OBFPS-300D-W

Satin Nickel, Deep Trim Kit

OBPS-300D-SN

Female Tee Adaptor

Dual Escutcheon

Extension Ring

PULL STOP BOX

P-06735*

P-06930

PART NUMBER DESCRIPTION

MSTR CTN

QTY

TRIM KITS-INCLUDES KNOB AND ESCUTCHEON

OBPS-200-W White-Paintable 100 OBPS-200-C Chrome 100 OBPS-200-SN Satin Nickel 100 OBPS-200-ORB Oil Rubbed Bronze 100 OBPS-200-W-S White-Paintable with Screw 100 OBPS-300D-W-S White-Paintable (Deep) with Screw 100 OBPS-300D-C Chrome (Deep) 100 OBPS-300D-SN Satin Nickel (Deep) 100 OBPS-300D-ORB Oil Rubbed Bronze (Deep) 100

TRIM KITS-INCLUDES KNOB, ESCUTCHEON, SCREWS AND CLIP

OBPS-400-W

OBPS-400D-W

*Designed for ice maker, dishwasher and washing machine Pull Stop Box

PART NUMBER DESCRIPTION

White-Paintable 100 White-Paintable (Deep) 100

™

applications.

MSTR CTN

ACCESSORIES/REPLACEMENT PARTS

OBPS-500D-W Extension Kit For Trim (Deep, White) 10 P-06878-LL 3/8" Compr., 1/4 Turn Replacement Valve, Lead Free 48 P-06979-LL 1/4" Comp., 1/4 Turn Replacement Valve, Lead Free 10 P-06881 3/4" GHT, 1/4 Turn Replacement Valve, Lead Free 120 P-06923 Escutcheon Extension Ring 1000 P-06930 Dual Escutcheon Extension Ring 2000 P-06928 2.5" Self-Tapping Screw 2 Pack 4500 P-06921 1" Self-Tapping Screw 2 Pack 5000 P-1078-08* 8" Hyco strap TBD P-1078-20* 20" Hyco strap TBD P-06735* Tee Adaptor, Female 3/8" Comp x 2 x Male 3/8" Com TBD P-06406 Poly Inline Hammer Arrester 1/2" Crimp PEX 50 P-06407 Poly Inline Hammer Arrester 1/2" Uponor PEX 50 P-06408 Poly Inline Hammer Arrester 1/2" Male CPVC 50

*Available Summer 2017

QTY

Washing Machine Drain

(Fire Rated)

OBFD-100

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Washing Machine Drain

OBD-100

The LSP Drain Box is molded from high impact plastic with error proof no-knockout drains and is an excellent accessory to the regular and FireStop ™ Pull Stop Box™ product line. Includes threaded test plug. Available optional Condensate Stand has visible air gap. Use with Hyco Strap for top and bottom support.

PART NUMBER DESCRIPTION

MSTR CTN

QTY

WASHING MACHINE DRAIN BOX

OBD-100 Washing Machine Drain 10

OBFD-100 Washing Machine Drain (Fire Rated) 10

HoseMate Valves

RetroFit Valves

Lead Free Angle Valves

Lead Free Straight Valves

QUARTER TURN BALL VALVES

Lead-Free Quarter Turn Ball Valves in Straight and Angle versions make for a quick and easy shut-off. Heavy duty nickel plated brass ensures durability and ball style valve will not freeze up. PTFE seats allow for extra wear resistance and Chloramine/chlorine resistant O-rings will not break down due to oxidation.

Angle Valve

V-104-A-LL

Straight Valve

V-104-S-LL

PART NUMBER INLET OUTLET

NICKEL-PLATED

V-001-A-LL V-100-A-LL V-101-A-LL V-102-A-LL 1/2" F.I.P. 3/8" O.D. Compr. 144 V-103-A-LL 1/2" Crimp PEX 3/8" O.D. Compr. 144 V-104-A-LL 1/2" Uponor PEX 3/8" O.D. Compr. 144 V-105-A-LL 3/8" F.I.P. 3/8" O.D. Compr. 144 V-107-A-LL 1/2" F.I.P. 3/4" Hose Thread 144 V-401-A-LL 5/8" O.D. Compr. 1/2" OR 7/16" Slip Joint 144 V-402-A-LL 1/2" F.I.P. 1/2" OR 7/16" Slip Joint 144 V-500-A-LL 1/2" Female CPVC 3/8" O.D. Compr. 144

PART NUMBER INLET OUTLET

NICKEL-PLATED

V-100-S-LL 1/2" Female Sweat 3/8" O.D. Compr. 144 V-101-S-LL 5/8" O.D. Compr. 3/8" O.D. Compr. 144 V-102-S-LL 1/2" F.I.P. 3/8" O.D. Compr. 144 V-103-S-LL 1/2" Crimp PEX 3/8" O.D. Compr. 144 V-104-S-LL 1/2" Uponor PEX 3/8" O.D. Compr. 144 V-105-S-LL 3/8" F.I.P. 3/8" O.D. Compr. 144 V-401-S-LL 5/8" O.D. Compr. 1/2" OR 7/16" Slip Joint 144 V-402-S-LL 1/2" F.I.P. 1/2" OR 7/16" Slip Joint 144 V-500-S-LL 1/2" Female CPVC 3/8" O.D. Compr. 144 V-2000-S-LL 3/8" O.D. Female Compr 3/8" O.D. Compr. 144

5/8" O. D Compr 1/4" O.D. Compr 1/2" Female Sweat 3/8" O.D. Compr. 5/8" O.D. Compr. 3/8" O.D. Compr.

Lead Free

MSTR CTN

QTY

144 144 144

NSF/ANSI 61

MSTR CTN

QTY

NSF/ANSI 61

QUARTER TURN BALL VALVES

HoseMate Valve

V-750-S

RetroFit Valve

V-2000-S-LL

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Solid brass construction. 1/4 turn only. Working pressures to 125 psi. Can be used indoors or outdoors. Attaches to garden equipment.

PART NUMBER HANDLE INLET X OUTLET

V-750-S Brass 3/4" F.G.H.T. x M.G.H.T. 24

UNFINISHED

P-06306 Blue Handle 5/8" Compr. X 3/4" M.G.H.T. 24 P-06307 Red Handle 5/8" Compr. X 3/4" M.G.H.T. 24

Piggyback on old adapter or connector stop. Save time - leave old parts in place. Quarter-turn shut-off.

PART NUMBER INLET OUTLET

V-2000-S-LL 3/8" Compr. H.C. 3/8" O.D. Compr. 24

MSTR CTN

QTY

MSTR CTN

QTY

Lead Free

HOSE END FITTING GUIDE & GLOSSARY

Glossary Information

O.D. Compression

Ballcock

Flare

Female Garden Hose Thread (F.G.H.T.)

Soft Compression Seal (S.C.)

Hard Compression Seal (H.C.)

Uses a soft cone washer to make a water-tight seal.

Metal to metal seal.

Uses a brass compression ring seal around the outside of a copper tube.

Available in either plastic or metal for toilet connection.

Metal to Metal tapered seal.

The same tting as a garden hose. Uses a washer to make a water tight seal.

HOSE END FITTING GUIDE & GLOSSARY

H.C. = Hard Compression Seal

S.C. = Soft Compression Seal

F.I.P. = Female Iron Pipe Thread

M.I.P. = Male Iron Pipe Thread

Compr. = Unied National Threads

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

F.G.H.T. = Female Garden Hose Thread

M.G.H.T. = Male Garden Hose Thread

O.D. Compr. = Copper Tube Compression

All ballcocks are female and have soft cone compression washers, unless otherwise noted.

AQUA-FLO® PRODUCT FAMILIES GUIDE

UltraCore

™

MightyFlex

™

DiamondBack

™

Ultracore – The exclusive UltraCore™ barrier in the Aqua-Flo® connectors does not

ake or erode like other connectors. It is super-resistant to chemical degradation from

chemicals such as chloramine and chlorine. It can also withstand dramatic changes in water pressure. It is free of BPAs, Phthalates and leaves no trace of odors or taste in the water. UltraCore™ connectors have a unique 12-point crimp, making them far less susceptible to leaks than the standard 8-point crimp.

Crimp Points: 12 Working Pressure: 125 PSI with intermittent impulse up to 180 PSI Working Temperature: 40° F with intermittent temps up to 180ºF

UltraCore

MightyFlex

™

AQUA-FLO

Installations are easier and faster than ever with our MightyFlex™ connectors, even in cramped conditions. They feature a reinforced PVC liner with stainless steel braid. They are chloramine and chlorine resistant and have been manufactured to withstand dramatic changes in water pressure to prevent bursting.

MightyFlex™ connectors have a unique double 12-point crimp, making them far less

PRODUCT FAMILIES GUIDE

susceptible to leaks than the standard 8-point crimp.

Crimp Points: 12 Working Pressure: 125 PSI with intermittent impulse up to 180 PSI Working Temperature: 40° F with intermittent temps up to 180ºF

™

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

DiamondBack

With our DiamondBack™ reinforced PVC connectors, you’ll never need special installation tools again. They are easy to install and require no soldering. They feature a reinforced PVC liner that is resistant chloramine and chlorine and have been manufactured to withstand dramatic changes in water pressure to prevent bursting. DiamondBack™ connectors have a unique 12-point crimp, making them far less susceptible to leaks than the standard 8-point crimp.

Crimp Points: 12

™

Working Pressure: 125 PSI with intermittent impulse up to 180 PSI Working Temperature: 40° F with intermittent temps up to 180ºF

FLEX ARRESTER™ CONNECTORS

Flex Arrester™ Connectors

Eliminate annoying and potentially dangerous water hammer when installed in Icemakers, Dishwashers, Washing Machines, Faucets and Toilets. Designed with the patented LSP Inline Hammer Arrester built into a corrosion-resistant polymer braid with Ultra Core arrow clearly imprinted on the Hammer Arrester.

™

. Easy to install with directional Water Flow

Ice Maker

Dishwasher

PART NUMBER DESCRIPTION

MSTR CTN

QTY

ICE MAKER CONNECTOR – 60"

IMFA-160-PP 1/4" Compr. H.C. x 1/4" Compr. H.C. 10

DISHWASHER CONNECTOR – 60"

DWFA-160-PP

3/8" Compr. S.C. x 3/8" Compr. S.C. w/ 3/8" NPT 90° Elbow Adapter

WASHING MACHINE CONNECTOR – 60" – ARRESTER IS 12" FROM VALVE

WMFA-160-PP 3/8" I.D., 3/4" FGHT X 3/4" FGHT 10

FAUCET CONNECTOR – 20"

FCFA-120-PP 3/8" Compr. x 1/2" FIP 25

CONNECTORS

™

FLEX ARRESTER

(Arrester is 12" from Valve)

Washing Machine

TOILET CONNECTOR – 12"

WCFA-112-PP 3/8" Compr. x 7/8" Ball Cock 25

Lead Free

PART NUMBER DESCRIPTION

NSF/ANSI 61 ASSE 1010

MSTR CTN

QTY

ACCESSORIES

P-06365 Male 3/8" Comp x 3/4" FGHT Elbow Adapter 100

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Polymer Push On Valves

Polymer Push On Valves With Integrated Supply Line (White)

Accessories

POLYMER PUSH ON VALVES (PVs)

Designed with Chloramine resistant rubber components and connected to the patented UltraCore™ supply line, this angle stop allows for excellent resistance to oxidation, scaling, mineral buildup, chemicals and heat. Bulk packaged. Includes Escutcheon and Gripper Ring.

PART NUMBER COLOR

1/2" PUSH ON X OUTLET 3/8" COMPRESSION

PV-100 Push On Valve Only White 24 PV-100-GR Push On Valve Only Gray 24

Polymer Push On Valve Only

PV-100

MSTR CTN

QTY

Polymer Push On Valves –

Toilet Connnector

PV-WC112

PART NUMBER LENGTH

TOILET CONNECTOR 1/2" PUSH ON X 7/8" BALL COCK NUT SC

PV-WC112* 12" 24 PV-WC116* 16" 24 PV-WC120* 20" 24

FAUCET CONNECTOR 1/2" PUSH ON X 1/2" FIP SC

PV-FC112* 12" 24 PV-FC116* 16" 24 PV-FC120* 20" 24 PV-FC130* 30" 24

ICE MAKER CONNECTOR 1/2" PUSH ON X 1/4" COMP

PV-IM172* 72" 10

DISHWASHER CONNECTOR 1/2" PUSH ONX 3/4" FGHT ELBOW

PV-DW160* 60" 10

*Available in Gray with Part # plus: -GR

Lead Free

MSTR CTN

ASSE 1061

QTY

NSF/ANSI 61

POLYMER PUSH ON VALVES

(

PVs

)

Polymer Push On Valve

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

DISHWASHER 3/8" MIP X 3/8" COMP ELBOW ADAPTER

FTG-05-0380-L 5000

Lead Free

ASSE 1061

NSF/ANSI 61

WATER HEATER CONNECTORS

Stainless Steel Corrugated Connectors

Chrome plated brass nut. Non-toxic and sanitary. Truly kink resistant. Flexible but durable even with multiple bends. Tube

resists work hardening allowing for more exibility and easier installation. No dielectric union required. 100% leak tested.

High corrosion-resistant stainless steel.

7 Series

8 Series

PART NUMBER DESCRIPTION LENGTH

MSTR CTN

QTY

WCS-112-PP 3/4" F.I.P. x 3/4" F.I.P. 12" 25

WCS-118-PP 3/4" F.I.P. x 3/4" F.I.P. 18" 25

WCS-124-PP 3/4" F.I.P. x 3/4" F.I.P. 24" 25

WCS-312-PP 1" F.I.P. x 1" F.I.P. 12" 25

WCS-318-PP 1" F.I.P. x 1" F.I.P. 18" 25

WCS-324-PP 1" F.I.P. x 1" F.I.P. 24" 25

WCS-418-PP 3/4" F.I.P. x 3/4" Copper Sweat 18" 25

WCS-424-PP 3/4" F.I.P. x 3/4" Copper Sweat 24" 25

WCS-518-PP 3/4" Uponor PEX x 3/4" F.I.P. 18" 25

WCS-524-PP 3/4" Uponor PEX x 3/4" F.I.P. 24" 25

WCS-718-PP 3/4" Push to Conn 18" 25

WCS-724-PP 3/4" Push to Conn 24" 25

WCS-818-PP 3/4" Crimp PEX x 3/4" F.I.P. Nut 18" 25

WCS-824-PP 3/4" Crimp PEX x 3/4" F.I.P. Nut 24" 25

WITH SWEAT ADAPTER

WSS-112-PP 3/4" F.I.P. x 3/4" F.I.P. 12" 25

WATER HEATER CONNECTORS

5 Series w/ Valve

WSS-118-PP 3/4" F.I.P. x 3/4" F.I.P. 18" 25

WSS-124-PP 3/4" F.I.P. x 3/4" F.I.P. 24" 25

WITH 1/4 TURN BALL VALVE

WCSV-518-PP 3/4" Uponor PEX 1/4 Turn Ball Valve x 3/4" F.I.P. 18" 25

WCSV-524-PP 3/4" Uponor PEX 1/4 Turn Ball Valve x 3/4" F.I.P. 24" 25

WCSV-718-PP 3/4" Push to Conn. 1/4 Turn Ball Valve x 3/4" F.I.P. Nut 18" 25

WCSV-724-PP 3/4" Push to Conn. 1/4 Turn Ball Valve x 3/4" F.I.P. Nut 24" 25

WCSV-818-PP 3/4" Crimp PEX 1/4 Turn Ball Valve x 3/4 F.I.P. Nut 18" 25

WCSV-824-PP 3/4" Crimp PEX 1/4 Turn Ball Valve x 3/4 F.I.P. Nut 24" 25

Lead Free

NSF/ANSI 61

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

WATER HEATER CONNECTORS

UltraCore™ Stainless Steel Braided

Copper Corrugated Connectors

UltraCore™ Liner with Stainless Steel braid. Bright nickel plated nuts with brass ttings and a double 12 point crimp.

Stainless Steel Braided

PART NUMBER LENGTH

3/4" M.I.P. X 7/8" O.D. COMPR.

WHC-118-PP 18" 10 WHC-124-PP 24" 10

3/4" M.I.P. X 3/4" F.I.P.

WHF-118-PP 18" 10 WHF-124-PP 24" 10

3/4" F.I.P. X 3/4" F.I.P.

WFF-118-PP 18" 10 WFF-124-PP 24" 10

5/8" O.D. COMPR. X 3/4" M.I.P.

WHC-518-PP 18" 10 WHC-524-PP 24" 10

3/4" M.I.P. w/ DIELECTRIC INSERT X 3/4" CPVC SOCKET

WHL-2118-PP 18" 10

3/4" M.I.P. w/ DIELECTRIC INSERT X 3/4" PEX BARB

WHJ-2118-PP 18" 10

3/4" F.I.P. X 7/8" O.D. COMPR.

WFC-118-PP 18" 10 WFC-124-PP 24" 10

3/4" F.I.P. X 5/8" O.D. COMPR.

WFC-518-PP 18" 10 WFC-524-PP 24" 10

3/4" F.I.P. X 3/4" CPVC

WFL-2118-PP 18" 10

MSTR CTN

QTY

Lead Free

WATER HEATER CONNECTORS

Copper Corrugated Connectors

Annealed corrugated copper for improved exibility and durability. Machined brass ttings with built in dielectric.

PART NUMBER DESCRIPTION LENGTH

WCP-112-PP 3/4" F.I.P. x 3/4" F.I.P. 12" 25 WCP-118-PP 3/4" F.I.P. x 3/4" F.I.P. 18" 25 WCP-124-PP 3/4" F.I.P. x 3/4" F.I.P. 24" 25 WCP-212-PP 3/4" F.I.P. x 3/4" Sweat 12" 25 WCP-218-PP 3/4" F.I.P. x 3/4" Sweat 18" 25 WCP-224-PP 3/4" F.I.P. x 3/4" Sweat 24" 25

NSF/ANSI61

MSTR CTN

QTY

Lead Free

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

FAUCET CONNECTORS

MightyFlex™ Stainless Steel Braided

DiamondBack™ Vinyl

™

Reinforced PVC MightyFlex a double 12 point crimp. Soft Cones feature a chloramine resistant washer.

Liner with Stainless Braid. Bright nickel plated nuts with brass ttings and

MightyFlex™ Stainless

Steel Braided

DiamondBack™ Vinyl

FAICET CONNECTORS

PART NUMBER LENGTH

MSTR CTN

3/8" COMPR. H.C. X 3/8" O.D. COMPR.

TFC-109-PP 9" 25 TFC-112-PP 12" 25 TFC-116-PP 16" 25 TFC-120-PP 20" 25

3/8" COMPR. H.C. X 3/8" COMPR. H.C.

KFC-509-PP 9" 25 KFC-512-PP 12" 25 KFC-516-PP 16" 25 KFC-520-PP 20" 25

Lead Free

Reinforced PVC DiamondBack

™

Liner. Bright nickel plated nuts with brass ttings and a double

12 point crimp. Soft cones feature a chloramine resistant washer.

PART NUMBER LENGTH

MSTR CTN

1/2" F.I.P. S.C. X 3/8" COMPR. S.C.

VF-109-PP 9" 25 VF-112-PP 12" 25 VF-116-PP 16" 25 VF-120-PP 20" 25 VF-124-PP 24" 25 VF-130-PP 30" 25 VF-136-PP 36" 10 VF-148-PP 48" 10 VF-172-PP 72" 10

7/16" COMPR. X 1/2" F.I.P.

VF-212-PP 12" 25 VF-220-PP 20" 25

1/2" F.I.P. X 1/2" CONE

VF-316-PP 16" 25

1/2" F.I.P. S.C. X 1/2" F.I.P. S.C.

VF-409-PP 9" 25 VF-412-PP 12" 25 VF-416-PP 16" 25 VF-420-PP 20" 25 VF-424-PP 24" 25 VF-436-PP 36" 10 VF-448-PP 48" 10

3/8" COMPR. S.C. X 3/8" COMPR. S.C.

VF-509-PP 9" 25 VF-512-PP 12" 25 VF-516-PP 16" 25 VF-520-PP 20" 25 VF-524-PP 24" 25 VF-536-PP 36" 10

Lead Free

QTY

NSF/ANSI 61

QTY

NSF/ANSI 61

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

MightyFlex™ Stainless Steel Braided

FAUCET CONNECTORS

MightyFlex™ Stainless

Steel Braided

Reinforced PVC MightyFlex

™

Liner with Stainless Braid. Bright nickel plated nuts with brass ttings and

a double 12 point crimp. Soft Cones feature a chloramine resistant washer.

PART NUMBER LENGTH

MSTR CTN

1/2" F.I.P. S.C. X 3/8" COMPR. S.C.

SFC-109-PP 9" 25 SFC-112-PP 12" 25 SFC-116-PP 16" 25 SFC-120-PP 20" 25 SFC-124-PP 24" 25 SFC-130-PP 30" 25 SFC-136-PP 36" 25 SFC-148-PP 48" 10 SFC-160-PP 60" 10 SFC-172-PP 72" 10

1/2" F.I.P. S.C. X 7/16" COMPR. S.C.

SFC-212-PP 12" 25 SFC-216-PP 16" 25 SFC-220-PP 20" 25 SFC-224-PP 24" 25

1/2" F.I.P. S.C. X 1/2" COMPR. S.C.

SFC-309-PP 9" 25 SFC-312-PP 12" 25 SFC-316-PP 16" 25 SFC-320-PP 20" 25 SFC-324-PP 24" 25 SFC-330-PP 30" 25 SFC-336-PP 36" 10 SFC-348-PP 48" 10

1/2" F.I.P. S.C. X 1/2" F.I.P. S.C.

SFC-409-PP 9" 25 SFC-412-PP 12" 25 SFC-416-PP 16" 25 SFC-420-PP 20" 25 SFC-424-PP 24" 25 SFC-430-PP 30" 25 SFC-436-PP 36" 10 SFC-448-PP 48" 10

3/8" COMPR. S.C. X 3/8" COMPR. S.C.

SFC-506-PP 6" 25 SFC-509-PP 9" 25 SFC-512-PP 12" 25 SFC-516-PP 16" 25 SFC-520-PP 20" 25 SFC-524-PP 24" 25 SFC-530-PP 30" 25 SFC-536-PP 36" 10 SFC-548-PP 48" 10 SFC-560-PP 60" 10 SFC-572-PP 72" 10 SFC-5120-PP 10’ 10

1/2" F.I.P. S.C. X 3/8" FLARE

SFF-112-PP 12" 25 SFF-116-PP 16" 25 SFF-120-PP 20" 25 SFF-130-PP 30" 25

Lead Free

NSF/ANSI 61

QTY

FAUCET CONNECTORS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

TOILET CONNECTORS

MightyFlex™ Stainless Steel Braided

MightyFlex™ 1/2" Full Flow

MightyFlex™ Stainless Steel Braided

MightyFlex™ Stainless

Steel Braided

Reinforced PVC MightyFlex a double 12 point crimp. Soft cones feature a chloramine resistant washer.

PART NUMBER LENGTH

7/8" BALLCOCK X 3/8" FLARE

SFT-112-PP 12" 25 SFT-116-PP 16" 25 SFT-120-PP 20" 25

7/8" BALLCOCK X 1/2" FLARE

SFT-312-PP 12" 25 SFT-316-PP 16" 25 SFT-320-PP 20" 25

7/8" BALLCOCK X 3/8" COMPR. S.C.

SWC-109-PP 9" 25 SWC-112-PP 12" 25 SWC-116-PP 16" 25 SWC-120-PP 20" 25 SWC-124-PP 24" 25

7/8" BALLCOCK X 1/2" COMPR. S.C.

SWC-312-PP 12" 25 SWC-316-PP 16" 25 SWC-320-PP 20" 25

7/8" BALLCOCK X 1/2" F.I.P. S. C.

SWC-409-PP 9" 25 SWC-412-PP 12" 25 SWC-416-PP 16" 25 SWC-420-PP 20" 25

™

Liner with Stainless Braid. Bright nickel plated nuts with brass ttings and

MSTR CTN

QTY

TOILET CONNECTORS

MightyFlex™ Stainless

Steel Braided

1/2" Full Flow Toilet

Connectors

Reinforced PVC MightyFlex™ Liner with Stainless Braid. Bright nickel plated nuts with brass ttings and a double 12 point crimp. Soft cones feature a chloramine resistant washer.

PART NUMBER LENGTH

7/8" BALLCOCK X 3/8" COMPR. H.C.

KWC-109-PP 9" 25 KWC-112-PP 12" 25 KWC-116-PP 16" 25 KWC-120-PP 20" 25

7/8" BALLCOCK X 1/2" COMPR. H.C.

KWC-312-PP 12" 25

™

Reinforced PVC MightyFlex a double 12 point crimp. Soft cones feature a chloramine resistant washer.

PART NUMBER LENGTH

7/8" BALLCOCK X 1/2" COMPRESSION S.C.

KWC-509-PP 9" 10 KWC-512-PP 12" 10

Liner with Stainless Braid. Bright nickel plated nuts with brass ttings and

MSTR CTN

QTY

MSTR CTN

QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

MightyFlex™ Stainless Steel Braided – Metal Ballcock

DiamondBack™ Vinyl

TOILET CONNECTORS

MightyFlex® Stainless Steel

Braided - Metal Ballcock

Reinforced PVC MightyFlex™ Liner with Stainless Braid. Bright nickel plated nuts with brass ttings and a double 12 point crimp. Soft cones feature a chloramine resistant washer.

PART NUMBER LENGTH

7/8" BALLCOCK X 3/8" COMPR. S.C.

SWC-512-PP 12" 25 SWC-516-PP 16" 25 SWC-520-PP 20" 25

7/8" BALLCOCK X 1/2" F.I.P. w/ WASHER

SWC-809-PP 9" 25 SWC-812-PP 12" 25 SWC-816-PP 16" 25

Reinforced PVC DiamondBack™ Liner. Bright nickel plated nuts with brass tting and a double 12 point crimp. Soft cones feature a chloramine resistant washer.

MSTR CTN

QTY

NSF/ANSI 61

DiamondBack™ Vinyl

PART NUMBER LENGTH

7/8" BALLCOCK X 3/8" COMPR. S.C.

VT-109-PP 9" 25 VT-112-PP 12" 25 VT-116-PP 16" 25 VT-120-PP 20" 25

7/8" BALLCOCK X 1/2" F.I.P. S.C.

VT-409-PP 9" 25 VT-412-PP 12" 25 VT-416-PP 16" 25

MSTR CTN

QTY

TOILET CONNECTORS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

WASHING MACHINE & ICE MAKER CONNECTORS

UltraCore™ Polymer Braided Washing Machine Connectors

MightyFlex™ Connectors

MightyFlex™ Stainless Steel Braided Ice Maker Connectors

DiamondBack™ Ice Maker Connectors

UltraCore™ Liner with corrosion-resistant polymer braid. Bright nickel plated nuts with brass ttings

and a double 12 point crimp. Corrosion-resistant polymer braid.

PART NUMBER LENGTH

1/2" I.D. – 3/4" F.G.H.T. X 3/4" F.G.H.T. – FOR FRONT LOAD WASHERS

WAS-148-PP 48" 10 WAS-160-PP 60" 10 WAS-172-PP 72" 10

MSTR CTN

QTY

UltraCore™ Polymer Braided Washing

Machine Connector

Reinforced PVC MightyFlex

ttings and 12 point crimp.

PART NUMBER LENGTH

3/8" I.D. – 3/4" F.G.H.T. X 3/4" F.G.H.T. – FOR TOP LOAD WASHERS

WAS-348-PP 48" 10 WAS-360-PP 60" 10 WAS-372-PP 72" 10

3/8" I.D. – 3/4" F.G.H.T. X 90° 3/4" F.G.H.T.

WAS-448-PP 48" 10 WAS-460-PP 60" 10 WAS-472-PP 72" 10

Reinforced PVC MightyFlex

ttings and 12 point crimp.

PART NUMBER LENGTH

1/4" COMPR. H.C. X 1/4" COMPR. H.C.

KDW-912-PP 12" 25 KDW-924-PP 24" 10 KDW-960-PP 60" 10

MightyFlex™ Stainless Steel Braided

Ice Maker Connector

KDW-972-PP 72" 10 KDW-984-PP 84" 10 KDW-996-PP 96" 10 KDW-9120-PP 120" 10

WASHING MACHINE & ICE MAKER CONNECTORS

KDW-9180-PP 180" 10

1/4" COMPR. S.C. X 1/4" COMPR. S.C.

SDW-936-PP 36" 10 SDW-948-PP 48" 10 SDW-960-PP 60" 10 SDW-972-PP 72" 10

™

Liner with Stainless Steel Braid. Bright nickel plated nuts with brass

MSTR CTN

QTY

™

Liner with Stainless Steel Braid. Bright nickel plated nuts with brass

MSTR CTN

QTY

Lead Free

NSF/ANSI 61

Reinforced PVC DiamondBack 12 point crimp. Soft cones feature a chloramine resistant washer.

PART NUMBER LENGTH

1/4" COMPR. S.C. X 1/4" COMPR. S.C.

VDW-936-PP 36" 10

DiamondBack

™

Ice Maker Connector

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

VDW-948-PP 48" 10 VDW-960-PP 60" 10 VDW-972-PP 72" 10

™

Liner. Bright nickel plated nuts with brass ttings and a double

MSTR CTN

QTY

Lead Free

NSF/ANSI 61

MightyFlex™ Stainless Steel Braided Dishwasher Connectors

DiamondBack™ Dishwasher Connectors

Accessories

DISHWASHER CONNECTORS

Reinforced PVC MightyFlex™ Liner with Stainless Braid. Bright nickel plated nuts with brass ttings and

a double 12 point crimp. Soft cones feature a chloramine resistant washer.

PART NUMBER LENGTH

1/2" F.I.P. S.C. X 3/8" COMPR. H.C. w/ 90° 3/8" M.I.P.ELBOW ADAPTER

KDW-148-PP 48" 10 KDW-160-PP 60" 10

MightyFlex™ Stainless Steel Braided

Dishwasher Connector

KDW-172-PP 72" 10 KDW-184-PP 84" 10

1/2" COMPR. H.C. X 3/8" COMPR. H.C. w/ 90° 3/8" M.I.P.ELBOW ADAPTER

KDW-360-PP 60" 10

1/2" F.I.P. S.C. X 1/2" F.I.P. S.C.

KDW-448-PP 48" 10 KDW-460-PP 60" 10 KDW-472-PP 72" 10

3/8" COMPR. S.C. X 3/4" F.G.H.T. w/ 90° ELBOW

KDW-548-PP 48" 10 KDW-560-PP 60" 10 KDW-572-PP 72" 10

3/8" COMPR. S.C. X 3/8" COMPR. H.C. w/ 90° 3/8" M.I.P. ELBOW ADAPTER

KDW-636-PP 36" 10 KDW-648-PP 48" 10 KDW-660-PP 60" 10 KDW-672-PP 72" 10 KDW-684-PP 84" 10 KDW-6120-PP 120" 10

1/2" COMPR. S.C. X 1/2" COMPR. S.C. w/ 90° 3/8" M.I.P.ELBOW ADAPTER

KDW-784-PP 84" 10

MSTR CTN

QTY

DISHWASHER CONNECTORS

Lead Free

DiamondBack

™

Dishwasher Connector

Reinforced PVC DiamondBack™ Liner. Bright nickel plated nuts with brass ttings and a double 12 point

crimp. Soft cones feature a chloramine resisitant washer.

Lead Free

MSTR CTN

QTY

NSF/ANSI 61

MSTR CTN

QTY

PART NUMBER LENGTH

3/8" COMPR. S.C. X 3/8" COMPR. H.C. w/ 90° 3/8" NPTELBOW ADAPTER

VDW-660-PP 60" 10 VDW-672-PP 72" 10 VDW-672-NE* 72" 10

*Does not come with elbow

PART NUMBER LENGTH

3/8" COMPR. X 3/48" F.G.H.T. 90°ELBOW ADAPTER w/NUT AND WASHER

P-06365 100

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

SPECIALIZED CONNECTORS

UltraCore™ Full Flow Connectors

UltraCore™ Large Diameter Connectors

TMX Series Hoses

UltraCore™ Full

Flow Connectors

™

UltraCore

Large

Diameter Connectors

Patented UltraCore

™

Liner with Stainless Steel Braid. Bright nickel plated nuts with brass ttings and

a double 12 point crimp.

PART NUMBER LENGTH

MSTR CTN

QTY

3/4" F.I.P. w/ WASHER X 3/4" F.I.P. w/ WASHER

HWH-118-PP 18" 10 HWH-124-PP 24" 10 HWH-148-PP 48" 10

Lead Free

NSF/ANSI 61

Patented UltraCore™ Liner with Stainless Steel Braid. Bright nickel plated nuts with brass ttings and a double 12 point crimp.

PART NUMBER LENGTH

MSTR CTN

QTY

LEAD FREE NICKEL PLATED OVER BRASS FITTINGS 1/2" F.I.P. w/ WASHER X 1/2" F.I.P w/ WASHER

PPC-118-PP 18" 10 PPC-124-PP 24" 10

LEAD FREE NICKEL PLATED OVER STEEL FITTINGS 1" F.I.P. w/ WASHER X 1" F.I.P. w/ WASHER

SFF-10012 12" 40 SFF-10018 18" 20 SFF-10024 24" 20 SFF-10036 36" 30

Lead Free

NSF/ANSI 61

SPECIALIZED CONNECTORS

NICKEL PLATED OVER BRASS FITTINGS WITH UNFINISHED BRASS ADAPTORS 1" ID - 1" MIP X 1/2" GROUND JOINT F.I.P. w/ 1/2" MIP ADAPTER

TMX-10020 20" 25 TMX-10024 24" 25 TMX-10036 36" 10 TMX-10048 48" 10

3/4" ID - 3/4" MIP X 3/4" GROUND JOINT F.I.P. w/ 3/4" MIP ADAPTER

TMX-07512 20" 25 TMX-07524 24" 25 TMX-07536 36" 10 TMX-07548 48" 10

1/2" ID - 1/2" MIP X 1/2" GROUND JOINT F.I.P. w/ 1/2" MIP ADAPTER

TMX-05018 20" 25 TMX-05024 24" 25 TMX-05036 36" 10

NSF/ANSI 61

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

NOTES

NOTES:

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

NOTES

TABLE OF CONTENTS

Polyolen foam insulation provides exceptional performance for thermal insulation, shock absorption, and sound

dampening. It is extremely low in water absorption and moisture vapor transmission, making it ideal for many applications.

Rubber insulation is used to retard heat gain and prevent condensation on cold water plumbing and air conditioning lines. The closed-cell structure is non-porous, resists mold growth, and provides effective moisture vapor resistance. The tough skin withstands tearing, rough handling, and severe environmental conditions. Factory-applied talc coating allowsit to easily slide onto the pipe during installation.

Polyolen Foam Insulation (Self-Sealing, Half-Slit) ......................................... 61

Rubber Insulation Un-Slit ................................................................................63

Rubber Insulation Seam Seal ..........................................................................65

TABLE OF CONTENTS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Foam (Self-Sealing, Half-Slit)

POLYOLEFIN FOAM INSULATION

Polyolen foam insulation is available in a wide variety of sizes and styles. Whether you require an

un-slit design for a slide on application or a peel and seal design for existing projects, LSP carries the right foam insulation product for you. Made in the U.S.A.

NOMINAL WALL THICKNESS 3/8"

PART NUMBER (CARTON)

SELF-SEALING MOQ HALF-SLIT MOQ NOMINAL O.D.

F-05838-SS F-05838-HS 5/8" 1/2" 5/8" 3/8" 396 F-03438-SS 100 F-03438-HS 100 3/4" 5/8" 3/4" 1/2" 300 F-07838-SS F-07838-HS 7/8" 3/4" 7/8" 276 F-10038-SS 100 F-10038-HS 100 1" 3/4" 246 F-11838-SS F-11838-HS 1-1/8" 1" 1-1/8" 222 F-11438-SS F-11438-HS 100 1-1/4" 1" 186 F-13838-SS F-13838-HS 1-3/8" 1-1/4" 1-3/8" 180 F-15838-SS F-15838-HS 1-5/8" 1-1/2" 1-5/8" 1-1/4" 138 F-20038-SS F-20038-HS 100 2" 1-1/2" 126 F-21838-SS F-21838-HS 2-1/8" 2" 2-1/8" 102 F-23838-SS F-23838-HS 100 2-3/8" 2" 84 F-25838-SS F-25838-HS 2-5/8" 2-1/2" 2-5/8" 72 F-27838-SS 100 F-27838-HS 100 2-7/8" 2-1/2" 60 F-31838-SS F-31838-HS 100 3-1/8" 3" 3-1/8" 54 F-31238-SS F-31238-HS 100 3-1/2" 3" 48 F-35838-SS 100 F-35838-HS 100 3-5/8" 3-1/2" 3-5/8" 48 F-41838-SS 100 4-1/8" 4" 4-1/8" 36 F-41238-SS F-41238-HS 100 4-1/2" 4" 36

NOMINAL I.D.

CTS

IPS NOMINAL FT/CTN

POLYOLEFIN FOAM INSULATION

NOMINAL WALL THICKNESS 1/2"

PART NUMBER (CARTON)

SELF-SEALING MOQ HALF-SLIT MOQ NOMINAL O.D.

F-05812-SS 5/8" 1/2" 5/8" 3/8" 300

F-03412-HS 100 3/4" 5/8" 3/4" 1/2" 264 F-07812-SS F-07812-HS 7/8" 3/4" 7/8" 240 F-10012-SS F-10012-HS 100 1" 3/4" 210 F-11812-SS F-11812-HS 1-1/8" 1" 1-1/8" 186 F-11412-SS F-11412-HS 100 1-1/4" 1" 168 F-13812-SS F-13812-HS 1-3/8" 1-1/4" 1-3/8" 150 F-15812-SS F-15812-HS 1-5/8" 1-1/2" 1-5/8" 1-1/4" 120 F-20012-SS F-20012-HS 100 2" 1-1/2" 96 F-21812-SS F-21812-HS 2-1/8" 2" 2-1/8" 84 F-23812-SS F-23812-HS 2-3/8" 2" 72 F-25812-SS F-25812-HS 2-5/8" 2-1/2" 2-5/8" 60 F-27812-SS F-27812-HS 100 2-7/8" 2-1/2" 54 F-31812-SS F-31812-HS 3-1/8" 3" 3-1/8" 48 F-31212-SS F-31212-HS 3-1/2" 3" 42 F-35812-SS F-35812-HS 3-5/8" 3-1/2" 3-5/8" 36 F-41812-SS F-41812-HS 100 4-1/8" 4" 4-1/8" 24 F-41212-SS F-41212-HS 100 4-1/2" 4" 24

CTS: Copper Tube Size SS: Peel & Seal Seam Closure Feature HS: Half-Slit Design IPS: Iron Pipe Size

Note: Uncommon sizes may require a longer lead time. Minimum order size may apply.

NOMINAL I.D.

CTS

IPS NOMINAL FT/CTN

Part Number Example:

F-05838-SS

5/8" I.D. 3/8" Wall Self-Sealing

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

POLYOLEFIN FOAM INSULATION

Foam (Self-Sealing, Half-Slit)

Polyolen foam insulation is available in a wide variety of sizes and styles. Whether you require an

un-slit design for a slide on application or a peel and seal design for existing projects, LSP carries the right foam insulation product for you. Made in the U.S.A.

NOMINAL WALL THICKNESS 3/4"

PART NUMBER (CARTON)

SELF-SEALING MOQ HALF-SLIT MOQ NOMINAL O.D.

F-03834-SS 100 F-03834-HS 3/8" 1/4" 3/8" 1/8" 228 F-01234-SS 100 F-01234-HS 100 1/2" 3/8" 1/2" 1/4" 210 F-05834-SS F-05834-HS 5/8" 1/2" 5/8" 3/8" 180 F-03434-SS 100 F-03434-HS 100 3/4" 5/8" 3/4" 1/2" 162 F-07834-SS F-07834-HS 7/8" 3/4" 7/8" 150 F-10034-SS 100 F-10034-HS 100 1" 3/4" 132 F-11834-SS F-11834-HS 1-1/8" 1" 1-1/8" 120 F-11434-SS 100 F-11434-HS 100 1-1/4" 1" 114 F-13834-SS F-13834-HS 1-3/8" 1-1/4" 1-3/8" 96 F-15834-SS F-15834-HS 1-5/8" 1 -1/2" 1-5/8" 1-1/4" 84 F-20034-SS F-20034-HS 100 2" 1-1/2" 66 F-21834-SS F-21834-HS 100 2-1/8" 2" 2-1/8" 54 F-23834-SS 2-3/8" 2" 54 F-25834-SS F-25834-HS 100 2-5/8" 2-1/2" 2-5/8" 48

F-27834-HS 100 2-7/8" 2-1/2" 42 F-31834-SS F-31834-HS 100 3-1/8" 3" 3-1/8" 36 F-31234-SS 100 F-31234-HS 100 3-1/2" 3" 30 F-35834-SS 100 F-35834-HS 100 3-5/8" 3-1/2" 3-5/8" 30 F-41834-SS 100 F-41834-HS 100 4-1/8" 4" 4-1/8" 24 F-41234-SS 4-1/2" 4" 24

NOMINAL I.D.

CTS

IPS NOMINAL FT/CTN

PART NUMBER (CARTON)

SELF-SEALING MOQ HALF-SLIT MOQ NOMINAL O.D.

F-05810-SS F-05810-HS 5/8" 1/2" 5/8" 3/8" 126 F-03410-SS 100 F-03410-HS 100 3/4" 5/8" 3/4" 1/2" 120 F-07810-SS F-07810-HS 7/8" 3/4" 7/8" 102 F-10010-SS 100 F-10010-HS 100 1" 3/4" 96 F-11810-SS F-11810-HS 1-1/8" 1" 1-1/8" 84

POLYOLEFIN FOAM INSULATION

F-11410-SS 100 F-11410-HS 100 1-1/4" 1" 72 F-13810-SS F-13810-HS 1-3/8" 1-1/4" 1-3/8" 72 F-15810-SS F-15810-HS 1-5/8" 1-1/2" 1-5/8" 1-1/4" 54 F-20010-SS 100 F-20010-HS 100 2" 1-1/2" 54 F-21810-SS F-21810-HS 2-1/8" 2" 2-1/8" 48 F-23810-SS F-23810-HS 100 2-3/8" 2" 42 F-25810-SS F-25810-HS 2-5/8" 2-1/2" 2-5/8" 36 F-27810-SS 100 2-7/8" 2-1/2" 36 F-31810-SS F-31810-HS 100 3-1/8" 3" 3-1/8" 24 F-31210-SS 100 F-31210-HS 100 3-1/2" 3" 24 F-35810-SS 100 3-5/8" 3-1/2" 3-5/8" 24

F-41210-SS 100 F-41210-HS 100 4-1/2" 4" 18

CTS: Copper Tube Size

SS: Peel & Seal Seam Closure Feature

HS: Half-Slit Design

IPS: Iron Pipe Size

NOMINAL WALL THICKNESS 1"

NOMINAL I.D.

F-41810-HS 100 4-1/8" 4" 4-1/8" 18

CTS

IPS NOMINAL FT/CTN

Part Number Example:

F-05834-SS

5/8" I.D. 3/4" Wall Self-Sealing

Note: Uncommon sizes may require a longer lead time. Minimum order size may apply.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Rubber (Un-Slit)

RUBBER INSULATION

Rubber insulation is available in a wide variety of sizes. Un-slit rubber insulation is made to slip over pipe.

3/8" WALL

PART NUMBER

K-05838 5/8" 1/2" 5/8" 3/8" 378 63 K-03438 3/4" 5/8" 3/4" 1/2" 342 57 K-07838 7/8" 3/4" 7/8" 288 48 K-11838 1-1/8" 1" 1-1/8" 3/4" 216 36 K-13838 1-3/8" 1-1/4" 1-3/8" 1" 168 28 K-15838 1-5/8" 1-1/2" 1-5/8" 1-1/4" 150 25 K-21838 2-1/8" 2" 2-1/8" 96 16 K-23838 2-3/8" 2" 84 14 K-25838 2-5/8" 2-1/2" 2-5/8" 72 12

PART NUMBER

K-05812 5/8" 1/2" 5/8" 3/8" 324 54 K-03412 3/4" 5/8" 3/4" 1/2" 270 45 K-07812 7/8" 3/4" 7/8" 228 38 K-11812 1-1/8" 1" 1-1/8" 3/4" 156 26 K-13812 1-3/8" 1-1/4" 1-3/8" 1" 120 20 K-15812 1-5/8" 1-1/2" 1-5/8" 1-1/4" 114 19 K-20012 2" 1-1/2" 114 19 K-21812 2-1/8" 2" 2-1/8" 72 12 K-23812 2-3/8" 2" 66 11 K-25812 2-5/8" 2-1/2" 2-5/8" 60 10 K-27812 2-7/8" 2-1/2" 48 8 K-31212 3-1/2" 3" 36 6 K-31812 3-1/8" 3" 3-1/8" 48 8 K-35812 3-5/8" 3-1/2" 3-5/8" 36 6 K-41212 4-1/2" 4" 24 4 K-41812 4-1/8" 4" 4-1/8" 24 4

INSULATION

NOMINAL I.D.

INSULATION

NOMINAL I.D.

CTS NOMINAL I.D.

(PLMB)

CTS NOMINAL I.D.

(PLMB)

CTS O.D. (HVAC/R)

1/2" WALL

CTS O.D. (HVAC/R)

IPS NOMINAL

LINEAR

FT/CTN

LINEAR

FT/CTN

MSTR CTN

QTY

MSTR CTN

QTY

RUBBER INSULATION

CTS: Copper Tube Size IPS: Iron Pipe Size

Note: Uncommon sizes may require a longer lead time. Minimum order size may apply.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Part Number Example:

K-07812

7/8" I.D. 1/2" Wall

RUBBER INSULATION

Rubber (Un-Slit)

Rubber insulation is available in a wide variety of sizes. Un-slit rubber insulation is made to slip over pipe.

3/4" WALL

RUBBER INSULATION

PART NUMBER

K-05834 5/8" 1/2" 5/8" 3/8" 180 30 K-03434 3/4" 5/8" 3/4" 1/2" 144 24 K-07834 7/8" 3/4" 7/8" 126 21 K-11834 1-1/8" 1" 1-1/8" 3/4" 90 15 K-13834 1-3/8" 1-1/4" 1-3/8" 1" 78 13 K-15834 1-5/8" 1-1/2" 1-5/8" 1-1/4" 72 12 K-20034 2" 1-1/2" 66 11 K-21834 2-1/8" 2" 2-1/8" 60 10 K-23834 2-3/8" 2" 48 8 K-27834 2-7/8" 2-1/2" 36 6 K-31834 3-1/8" 3" 3-1/8" 36 6 K-35834 3-5/8" 3-1/2" 3-5/8" 30 5 K-41834 4-1/8" 4" 4-1/8" 3-1/2" 24 4

PART NUMBER

K-05810 5/8" 1/2" 5/8" 3/8" 108 18 K-03410 3/4" 5/8" 3/4" 1/2" 108 18 K-07810 7/8" 3/4" 7/8" 90 15 K-11810 1-1/8" 1" 1-1/8" 3/4" 66 11 K-13810 1-3/8" 1-1/4" 1-3/8" 1" 60 10 K-15810 1-5/8" 1-1/2" 1-5/8" 1-1/4" 54 9 K-20010 2" 1-1/2" 42 7 K-21810 2-1/8" 2" 2-1/8" 42 7 K-23810 2-3/8" 2" 36 6 K-25810 2-5/8" 2-1/2" 2-5/8" 36 6 K-27810 2-7/8" 2-1/2" 36 6 K-31210 3-1/2" 3" 30 5 K-31810 3-1/8" 3" 3-1/8" 30 5 K-35810 3-5/8" 3-1/2" 3-5/8" 30 5 K-41210 4-1/2" 4" 18 3

INSULATION

NOMINAL I.D.

INSULATION

NOMINAL I.D.

CTS NOMINAL I.D.

(PLMB)

CTS NOMINAL I.D.

(PLMB)

CTS O.D. (HVAC/R)

1" WALL

CTS O.D. (HVAC/R)

IPS NOMINAL

LINEAR FT/CTN

MSTR CTN

QTY

MSTR CTN

QTY

CTS: Copper Tube Size IPS: Iron Pipe Size

Note: Uncommon sizes may require a longer lead time. Minimum order size may apply.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Part Number Example:

K-07834

7/8" I.D. 3/4" Wall

Rubber (Seam Seal)

RUBBER INSULATION

Rubber insulation is available in a wide variety of sizes. Made for existing pipe systems so the insulation can slip over the pipe and then be sealed.

3/8" WALL

PART NUMBER

K-05838-SS 5/8" 1/2" 5/8" 3/8" 348 58 K-03438-SS 3/4" 5/8" 3/4" 1/2" 318 53 K-07838-SS 7/8" 3/4" 7/8" 288 48 K-11838-SS 1-1/8" 1" 1-1/8" 3/4" 216 36 K-13838-SS 1-3/8" 1-1/4" 1-3/8" 1" 150 25 K-15838-SS 1-5/8" 1-1/2" 1-5/8" 1-1/4" 132 22 K-20038-SS 2" 1-1/2" 120 20 K-21838-SS 2-1/8" 2" 2-1/8" 78 13

PART NUMBER

K-05812-SS 5/8" 1/2" 5/8" 3/8" 312 52 K-03412-SS 3/4" 5/8" 3/4" 1/2" 270 45 K-07812-SS 7/8" 3/4" 7/8" 216 36 K-11812-SS 1-1/8" 1" 1-1/8" 3/4" 150 25 K-13812-SS 1-3/8" 1-1/4" 1-3/8" 1" 120 20 K-15812-SS 1-5/8" 1-1/2" 1-5/8" 1-1/4" 108 18 K-20012-SS 2" 1-1/2" 108 18 K-21812-SS 2-1/8" 2" 2-1/8" 60 10 K-23812-SS 2-3/8" 2" 60 10 K-25812-SS 2-5/8" 2-1/2" 2-5/8" 60 10 K-27812-SS 2-7/8" 2-1/2" 48 8 K-31212-SS 3-1/2" 3" 36 6 K-31812-SS 3-1/8" 3" 3-1/8" 48 8 K-35812-SS 3-5/8" 3-1/2" 3-5/8" 36 6 K-41212-SS 4-1/2" 4" 24 4 K-41812-SS 4-1/8" 4" 4-1/8" 3-1/2" 24 4

INSULATION

NOMINAL I.D.

INSULATION

NOMINAL I.D.

CTS NOMINAL I.D.

(PLMB)

CTS NOMINAL I.D.

(PLMB)

CTS O.D. (HVAC/R)

1/2" WALL

CTS O.D. (HVAC/R)

IPS NOMINAL

LINEAR FT/

CTN

LINEAR FT/

CTN

MSTR CTN

QTY

MSTR CTN

QTY

RUBBER INSULATION

CTS: Copper Tube Size IPS: Iron Pipe Size

Note: Uncommon sizes may require a longer lead time. Minimum order size may apply.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Part Number Example:

K-07812-SS

7/8" I.D. 1/2" Wall Self-Sealing

RUBBER INSULATION

Rubber (Seam Seal)

Rubber insulation is available in a wide variety of sizes. Made for existing pipe systems so the insulation can slip over the pipe and then be sealed.

3/4" WALL

RUBBER INSULATION

PART NUMBER

K-05834-SS 5/8" 1/2" 5/8" 3/8" 180 30 K-03434-SS 3/4" 5/8" 3/4" 1/2" 120 20 K-07834-SS 7/8" 3/4" 7/8" 126 21 K-11834-SS 1-1/8" 1" 1-1/8" 3/4" 90 15 K-13834-SS 1-3/8" 1-1/4" 1-3/8" 1" 78 13 K-15834-SS 1-5/8" 1-1/2" 1-5/8" 1-1/4" 72 12 K-20034-SS 2" 1-1/2" 66 11 K-21834-SS 2-1/8" 2" 2-1/8" 60 10 K-23834-SS 2-3/8" 2" 48 8 K-25834-SS 2-5/8" 2-1/2" 2-5/8" 42 7 K-27834-SS 2-7/8" 2-1/2" 36 6 K-31234-SS 3-1/2" 3" 30 5 K-31834-SS 3-1/8" 3" 3-1/8" 36 6 K-41834-SS 4-1/8" 4" 4-1/8" 3-1/2" 24 4 K-41234-SS 4-1/2" 4" 24 4

PART NUMBER

K-05810-SS 5/8" 1/2" 5/8" 3/8" 108 18 K-03410-SS 3/4" 5/8" 3/4" 1/2" 78 13 K-07810-SS 7/8" 3/4" 7/8" 78 13 K-11810-SS 1-1/8" 1" 1-1/8" 3/4" 66 11

K-13810-SS 1-3/8" 1-1/4" 1-3/8" 1" 60 10

K-15810-SS 1-5/8" 1-1/2" 1-5/8" 1-1/4" 42 7 K-20010-SS 2" 1-1/2" 42 7 K-21810-SS 2-1/8" 2" 2-1/8" 42 7 K-23810-SS 2-3/8" 2" 36 6 K-25810-SS 2-5/8" 2-1/2" 2-5/8" 36 6 K-27810-SS 2-7/8" 2-1/2" 36 6 K-31210-SS 3-1/2" 3" 30 5 K-31810-SS 3-1/8" 3" 3-1/8" 30 5 K-35810-SS 3-5/8" 3-1/2" 3-5/8" 30 5 K-41210-SS 4-1/2" 4" 18 3 K-41810-SS 4-1/8" 4" 4-1/8" 3-1/2" 18 3

INSULATION

NOMINAL I.D.

INSULATION

NOMINAL I.D.

CTS NOMINAL I.D.

(PLMB)

CTS NOMINAL I.D.

(PLMB)

CTS O.D. (HVAC/R)

1" WALL

CTS O.D. (HVAC/R)

IPS NOMINAL

LINEAR FT/

CTN

LINEAR FT/

CTN

MSTR CTN

QTY

MSTR CTN

QTY

CTS: Copper Tube Size IPS: Iron Pipe Size

Note: Uncommon sizes may require a longer lead time. Minimum order size may apply.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Part Number Example:

K-07834-SS

7/8" I.D. 3/4" Wall Self-Sealing

NOTES

NOTES:

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

NOTES

/Frank Pattern

™

TABLE OF CONTENTS

™

Tech Specialties® represents LSP’s reputation for innovation in the roof drain product line. Its development of the Uniex roof drain with membrane clamps created a revolution in roof drains. Tech Specialties® carries a complete line of roof drains to meet the toughest and broadest of installations.

LSP acquired Frank Pattern™ which offers a broad line of cast iron drainage products. Frank Pattern™ has been in business since

Frank Pattern

1946, invented the "Instant Set" closet ange and was the originator of the baby blue color for cast iron drainage products. Frank

Pattern™ provides LSP with a broad line of closet anges, oor drains, shower drains, roof drains and cleanouts.

Roof Drain Guide ............................................................................................. 69

Roof Drains...................................................................................................... 70

Frank Pattern™ Roof Drains ........................................................................... 73

Floor Drain Guide ............................................................................................ 74

TABLE OF CONTENTS

Frank Pattern™ Floor, Area & Shower Drains ................................................ 75

Deck Drains & Accessories ............................................................................. 76

Roof Flashings............................................................................................ 77-78

Vent Shields .................................................................................................... 78

Closet Rings & Flanges ................................................................................... 79

Frank Pattern™ Cleanouts ............................................................................... 80

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

ROOF DRAIN GUIDE

Roof Drain Guide

/Frank Pattern

™

ORIGIN

The modern roof drain must be designed to drain off rain water in the most effective manner possible while maintaining an aesthetic appeal since it is placed in full view of the public in many instances.

HOW TO SELECT A ROOF DRAIN

To select the proper roof drain, the following information must be

determined by the specier:

• Type of roof construction

• Roof pitch

• Volume of expected rainfall

• Desired rate of drainage

• Roof load and safety overflow requirements

• Locations of drains

• Size

• Vandal proofing

SELECTION OF ROOF DRAIN BODY

For a heavy rainfall region use 12" diameter type for large or small roof areas. For a light rainfall region, use 8-1/2" diameter type for small roof areas.

SELECTING PROPER ROOF DRAIN LEADER SIZES

1. Calculate the total roof area.

2. Determine the maximum hourly rainfall in inches. (The gure can be acquired from your local weather bureau and or local code authority.)

3. Select leader size.

4. From Table 1, determine the number of square feet that can be drained by one roof leader at the local maximum rainfall rate.

5. Divide the total roof area by the area that one leader will handle. The above result is the number of roof drains required for the building. If the result is a fraction less, use the next higher number.

CALCULATING TOTAL G.P.M.

G.P.M. = .0104 x R x A G.P.M. = Gallons per minute R = Rainfall Intensity (inches/hour) A = Roof Area (square feet)

0.0104 = conversion factor

Example: 4" rainfall with a roof area of 30,000 square feet .0104 x 4" x 30,000 = 1248 G.P.M

TABLE 2 – ALLOWABLE FLOW IN G.P.M

PIPE

VERTICAL

SIZE

LEADER

2 30 12 17 24

3 90 36 51 72

4 192 78 111 157

5 348 142 201 284

6 566 231 327 462

8 1220 498 705 996

10 2200 902 1275 1804

12 1467 2076 2934

15 2666 3774 5332

HORIZONTAL STORM DRAIN SLOPE / FT

1/8" 1/4" 1/2"

Frank Pattern

™

ROOF DRAIN GUIDE

NOTE: It can be readily seen that if 4" leaders were desired the number of roof drains required would increase to 22 drains. If a small number of roof drains are required then a larger leader would have to be chosen. Several small drains and leaders rather than one or two large drains will ensure even, safe and adequate roof drainage. Drains should be spaced for even drainage.

LEADERS SIZE TABLE 1 – HOURLY RAINFALL IN INCHES

PIPE SIZE

INCHES

2 3.14 3 7.06 8,880 5,860 4,400 3,520 2,930 2,200 1,760 1,470 1,260 1,100 4 12.56 18,400 12,700 9,200 7,360 6,130 4,600 3,680 3,070 2,630 2,300 5 19.60 34,600 23,050 17,300 13,840 11,530 8,650 6,920 5,765 4,945 4,325 6 28.30 54,000 36,000 27,000 21,600 18,000 13,500 10,800 9,000 7,715 6,750 8 50.25 116,000 77,400 58,000 46,400 38,680 29,000 23,200 19.315 16,570 14,500

NOTE: Above table is for leader sizes. Select drains with adequate open free area in proportion to the leader size and consistent with code requirements. Based on National Plumbing Code.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

OPEN AREA

SQ. IN.

1 1-1/2 2 2-1/2 3 4 5 6 7 8

ROOF AREA – SQUARE FEET

2,880 1,920 1,440 1,150 960 720 575 480 410 360

™

UNI-FLEX™ Roof Drain

UNI-FLEX™ Roof Drain with Overow

Accessories

Plastic Roof Drain with Side-Outlet

Frank Pattern

UNI-FLEX

UNI-FLEX™ Roof Drain

™

Roof Drain with

Overow

/Frank Pattern

™

ROOF DRAINS

Accommodates single-ply, modied membranes and BUR systems. Comes with nylon

grate and screw kit. One expansion coupling. One recessed clamping ring with screw kit. Deck screw kit. Dimensions: Drain/Flange: 20-1/4" x 20-1/4"; Drain Basin: 9-1/4" x 9-1/4". Made in the U.S.A.

PART NUMBER DESCRIPTION

T-6002 2" ABS 1 T-6003 3" ABS 1 T-6004 4" ABS 1

MSTR CTN

QTY

Accommodates single-ply, modied membranes and BUR systems. Comes with nylon round

grate with screw kit. Two expansion couplings. Two clamping rings with screw kit. Deck screw

kit. Dimensions: Drain/Flange" 20-1/4" x 27"; Drain Basin: 9-1/4" x 9-1/4". Overow grate

included. Made in the U.S.A.

PART NUMBER DESCRIPTION

T-6102 2" ABS 1 T-6103 3" ABS 1 T-6104 4" ABS 1

MSTR CTN

QTY

ROOF DRAINS

Plastic Roof Drain

with Side-Outlet

PART NUMBER DESCRIPTION

T-0310 4-1/2" Nylon Overow Grate 1 P-70825 2" Adapter, Overow 1 P-70826 3" Adapter, Overow 1

MSTR CTN

QTY

Combines roof drain and ashing skirt. Incorporates 90 degree right angle outlet for shallow

joist areas. Nylon dome grate with screw kit. One expansion coupling. Deck screw kit.

Dimensions: Drain/Flange: 15-3/4" x 15-3/4"; Drain Basin: 9-1/4" x 9-1/4". Made in the U.S.A.

PART NUMBER DESCRIPTION MSTR CTN QTY LBS

T-0050 2" ABS 1 6 T-0052 3" ABS 1 6 T-0054 4" ABS 1 7

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Cast Iron Combination Roof Drain

ROOF DRAINS

Copper Roof Drain

Plastic Roof Drain with Side-Outlet & Overow

Accessories & Replacements

Plastic Side-Outlet Roof

Drain & Overow

Cast Iron Combination

Roof Drain

/Frank Pattern

Combines roof drain, ashing skirt and overow. Incorporates 90 degree right angle outlet for

shallow joist areas. Nylon dome grate with screw kit. Two expansion couplings. Deck screw

kit. Dimensions: Drain/Flange: 22-1/4" x 15-1/4"; Drain Basin: 9-1/4" x 9-1/4". Overow grate

included. Made in the U.S.A.

PART NUMBER DESCRIPTION

T-0020 2" ABS T-0022 3" ABS T-0024 4" ABS

Cast iron membrane clamps bolt to both roof and overow drains. Designed with their own ashing skirt. Cast iron dome grate comes standard with cast iron drains. Dual membrane

clamps provide a watertight bond. Shallow bowl/sump version. Dimensions: Drain/Flange:

19-1/4" x 10-1/2". Overow grate included.

PART NUMBER DESCRIPTION

T-0082 T-0083 T-0084

2" Cast Iron Combo 24 3" Cast Iron Combo 24 4" Cast Iron Combo 24

MSTR CTN

QTY

1 1 1

MSTR CTN

QTY

™

Frank Pattern

™

Copper Roof Drain

Designed for at roof installations. Sits ush on roof deck. Seamless, one-piece construction. Drain and ange are formed from 100% copper. No-hub adapter is 100% brass. Dimensions:

Flange: 23 gauge Drain/Flange: 18" x 18" Drain Basin: 10". Made in the U.S.A.

PART NUMBER DESCRIPTION

T-0280 T-0281 T-0282

PART NUMBER DESCRIPTION

T-7239 P-70823

2" Copper No-Hub 1 3" Copper No-Hub 1 4" Copper No-Hub 1

8" Replacement Dome Grate 1 Replacement Adapter Ring 1

MSTR CTN

QTY

MSTR CTN

QTY

ROOF DRAINS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

/Frank Pattern

Copper Roof Drain with Side-Outlet

Copper Roof Drain with Overow

Replacements

™

ROOF DRAINS

Combines roof drain, ashing skirt and overow all in one unit. Designed for at roof installations. Seamless, one-piece construction. Drain and ange are formed from 100%

copper. No-hub adapter is 100% brass. Dimensions: Flange: 23 gauge Drain/Flange: 24" x

18" Drain Basin: 10". Overow grate included. Made in the U.S.A.

PART NUMBER DESCRIPTION

Copper Roof Drain

with Overow

™

T-0272

4" Copper No-Hub 1

MSTR CTN

QTY

Frank Pattern

Copper Roof Drain

with Side-Outlet

PART NUMBER DESCRIPTION

T-7239

P-70823

8" Replacement Dome Grate 1 Replacement Adapter Ring 1

MSTR CTN

QTY

Incorporates 90 degree right angle outlet for shallow joist areas. Sits ush on roof areas. Seamless, one-piece construction. Drain body and ange are formed from 100% copper.

No-hub adapter is 100% brass. Dimensions: Flange: 23 gauge Drain/Flange: 18" x 18" Drain Basin: 10". Made in the U.S.A.

PART NUMBER DESCRIPTION

T-0265 T-0266

2" Copper No-Hub 1 3" Copper No-Hub 1

MSTR CTN

QTY

ROOF DRAINS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

PART NUMBER DESCRIPTION

P-70823

Replacement Adapter Ring 1

MSTR CTN

QTY

FRANK PATTERN™ ROOF DRAINS

Frank Pattern™ Roof Drains

The Roof Drain must be designed to drain off rain water in the most effective manner possible while maintaining an aesthetic appeal. To select the proper roof drain, the following information must be determined: type of roof constructions, roof pitch, volume of expected

rainfall, desired rate of drainage, roof load and safety overow requirements, location of drains and possible vandal proong. For heavy rainfall regions, use 12" diameter type and

853SN

853N

for light rainfall regions, use 8-12" diameter type drains.

PART NUMBER DESCRIPTION

ROOF DRAIN 8-1/2 SERIES / SIDE OUTLET

852SN 2" No-Hub 64 853SN 3" No-Hub 64 854SN 4" No-Hub 64

ROOF DRAIN 8-1/2 SERIES / BOTTOM OUTLET

852N 2" No-Hub 64 853N 3" No-Hub 64 854N 4" No-Hub 64

ROOF DRAIN OVERFLOW COMBINATION

850-2N 2" x 2" No-Hub 24 850-3N 3" x 3" No-Hub 24 850-4N 4" x 4" No-Hub 24

ROOF DRAIN PARTS

850-003 Strainer Dome 24 850-006 Roof Drain Membrane Clamp - Reg 24 850-041 2" High Dam Membrane Clamp - 8" 24

/Frank Pattern

MSTR CTN

QTY

™

Frank Pattern

™

FRANK PATTERN

850-3N

850-041

850-003

™

ROOF DRAINS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

/Frank Pattern

Floor Drain Guide

™

FLOOR DRAIN GUIDE

HOW TO SELECT A FLOOR DRAIN

Floor drains are primarily used for inside locations where the

ow rate into the drain can be anticipated and for the outside

areas where rainfall volume dictates sizing. Drains should be

selected with the sufcient top size and grate free area to pass the anticipated ow. Grate free area is dened as the total area of

drainage openings in the grate. The drain outlet should be sized

large enough so that it will safely pass the maximum ow through

™

the grate, without creating buildup.

SIZING AND LOCATION

For most indoor installations, the grate free area should equal the transverse area of the connecting pipe. The number and location

of drains are based on the conguration of the oor plan, type of

Frank Pattern

operation and location of equipment. Location and number of the

oor drains required can be determined only after careful review of

the plans and anticipated building use.

Floor drains or area drains, when used to drain exterior areas, should have an open area equal to twice the cross section area of the connection pipe.

RECOMMENDED GRATE OPEN AREAS FOR VARIOUS PIPE SIZES

NOMINAL PIPE SIZE IN.

1.5 2.04 3.06 4.08

2.0 3.14 4.71 6.28

3.0 7.06 10.59 14.12

4.0 12.60 18.90 25.20

TRANSVERSE AREA OF PIPE SQ. IN.

MIN. FLOW REQUIREMENTS (INTERIOR AREAS) SQ. IN.

Most drains are available with nickel bronze or bronze tops to

match the surrounding trim in nished areas. Usually nished areas

require light duty to medium duty tops. Round and square styles are

available to blend with all types of construction and oor patterns.

MAX. FLOW REQUIREMENTS (EXTERIOR AREAS) SQ. IN.

The round top is the most exible type since it can be easily oriented to most oor plans.

ADJUSTABLE TOP

Floor drains are available with over 5 round and 2 square strainer heads. Strainer heads have a 3-3/4 – 11-1/2 threaded shank which threads into the top collar. This type of drain is particularly adaptable to two pour construction, such as bathrooms, shower

rooms, locker rooms and other light duty nished areas. Strainer head is easily adjusted when the tile oor is being set.

Reversible top collar permits adjustment of the strainer as low

as 3/4" (measured from top of the body pan to nished oor).

This low position is particularly adaptable for installation where ceramic tile is applied directly to the slab. With collar in regular

position, sufcient adjustment is available for all normal two pour application. Usually the normal sand and cement ll and ceramic tile measures approximately 1-1/2". For unusually deep oor lls or

unique construction, additional height can be obtained by using a

sufx E x 100 extension.

INSTANT SET® CONNECTION

The Instant Set® connection was invented and patented in 1968. Instant Set® - the original mechanical connection - provides an easy, time saving method to seal pipes while allowing for vertical

exibility. The mechanical joint uses 3 bolts to compress a resilient

rubber gasket against cast iron and plastic pipes to create a water tight seal.

SIZE NO-HUB

FLOOR DRAIN GUIDE

MODEL NUMBERS

2" N72 3" N73

Trap primer tap not available on above models.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

SIZE INSTANT SET MODEL NUMBERS 7"

2" 7020 N702 3" N703

Trap primer tap available on above models.

NO-HUB

FRANK PATTERN™ ASSORTED DRAINS

Frank Pattern™ Floor Drains

Frank Pattern™ Area Drains

Frank Pattern™ Shower Drains

Floor drains are primarily used for inside locations where the ow rate into the drain can be

TRUE

BLUE

N73W/5375S

anticipated and for the outside areas where rainfall volume can dictate sizing. Drains should

be selected with the sufcient top size and grate free area to pass the anticipated ow. Grate free area is dened as the total area of the drainage openings in the grate.

Most drains are available with Nickel Bronze tops to match surrounding trim in nished areas. Usually nished areas require light duty to medium duty tops.

/Frank Pattern

™

N703W/5375R

PART NUMBER

7" ADJUSTABLE FLOOR DRAINS WITH NICKEL BRONZE STRAINER

N72 No-Hub 240 N73 No-Hub 240 N72W/5375R 2" No-Hub 5" Round 240 N73W/5375R 3" No-Hub 5" Round 240 N72W/5375S 2" No-Hub 5" Square 240 N73W/5375S 3" No-Hub 5" Square 240

7" ADJUSTABLE FLOOR DRAINS WITH NICKEL BRONZE STRAINER AND MEMBRANE CLAMP

7020 2" Instant Set N702W/5375R 2" No-Hub 5" Round 240 N703W/5375R 3" No-Hub 5" Round 240 7020W/5375R 2" Instant Set N702W/5375S 2" No-Hub 5" Square 240 N703W/5375S 3" No-Hub 5" Square 240 7020W/5735S 2" Instant Set

ACCESSORIES

100EX Extension Extends 2"-4" 516 5375R-S&S Plate Screen & Screws 500

5375R

5375S

CHR5375R

CHR5375S

OUTLET

SIZE

Nickel Bronze Floor Drain Strainer Top

Chrome Plated Floor Drain Strainer Top

OUTLET

TYPE

ROUND

STRAINER

5" Round 240

Round

SQUARE

5" Square 240

Square

TOP

MSTR CTN

QTY

240

216

Frank Pattern

™

FRANK PATTERN

™

ASSORTED DRAINS

30C

20SD

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

PART NUMBER

20C 2" Instant Set 30C 3" Instant Set 40C 4" Instant Set

OUTLET

SIZE

OUTLET

TYPE

ROUND

STRAINER

6" 112 7" 112 8" 112

MSTR CTN

QTY

The 20SD Shower Drain was developed in 1968. At that time most of the plumbing ttings and

related products were painted the standard black color. To differentiate the products from the rest of the industry’s standard black color, the 20SD was painted with a light blue. Today it is recognized as "TRUE BLUE" in the industry.

PART NUMBER

20SD 2" Instant Set 3-1/2" 216

OUTLET

SIZE

OUTLET

TYPE

STRAINER

DIAMETER

MSTR CTN

QTY

Plastic Adjustable Deck Drain

Copper Deck Drain

Copper Deck Drain with Overow

Grates

Expansion Couplings

Plastic Adjustable Deck Drain

™

Frank Pattern

Copper Overow Deck Drain

Copper Deck Drain

/Frank Pattern

Versatile design can be used as a oor, area, or deck drain. Drain body is available in 2" or 4" depth with

a 2" or 3" sized outlet. Stabilizer adjusts to pour thickness and rigidly attaches drain. Comes complete with grate. Dimension: Drain/Flange: 9 3/8" x 9 3/8". Made in the U.S.A.

PART NUMBER DESCRIPTION

T-0200 4" Opening x 2" Depth x 2" Pipe 10 T-0202 4" Opening x 2" Depth x 3" Pipe 10 T-0204 4" Opening x 4" Depth x 2" Pipe 10 T-0206 4" Opening x 4" Depth x 3" Pipe 10

Versatile design can be used as a oor drain, area drain or deck drain. No-hub adapter is made of 100% brass. Sand-blasted nish allows excellent adhesion to waterproong systems. Dimensions: Flange 23

gauge Drain/Flange: 9" x 9" (2") 10" x 10" (3").

PART NUMBER DESCRIPTION

T-0210 2" Copper No-Hub 10 T-0211 3" Copper No-Hub 10

™

DECK DRAINS & ACCESSORIES

MSTR CTN

QTY

MSTR CTN

QTY

Grate - T-0300

Grate - T-0301

DECK DRAINS & ACCESSORIES

Grate - T-0318

Grate - T-0303

Primarily used as a secondary drainage system for roof, deck or area drains. Overow meets 2" building code requirements. Sand-blasted nish provides excellent adhesion to water proong systems.

Dimensions: Flange 23 gauge Drain/Flange: 9" x 9" (2") 10" x 10" (3"). Made in the U.S.A.

PART NUMBER DESCRIPTION

T-0220 2" Copper No-Hub 5 T-0221 3" Copper No-Hub 5

Choose from a wide variety of designs. Constructed of high impact plastic. Added UV inhibitors block sun’s harmful rays. All models come complete with screws. Made in the U.S.A.

PART NUMBER DESCRIPTION

T-0300 9" x 9" Nylon Dome Grate w/ Screw Kit 80 T-0301 9" x 9" Flat Nylon w/ Screw Kit 1 T-0303 4-1/2" Flat Nylon Deck / Area Grate w/ Screw Kit 1 T-0318 9" x 9" Nylon Round Grate w/ Screw Kit 1 T-7241 8" Aluminum Dome Grate 1

Provides exceptional exibility to reduce the damaging effects of roof expansion and contraction.

Preserves downspout/drain integrity to prolong roof life and decrease possibility of leaks and callbacks. Constructed of thermoplastic rubber with stainless steel bands. For use with plastic drains only. Made in the U.S.A.

PART NUMBER DESCRIPTION

T-0305 2" Expansion Coupling x 7-1/2" Height 80 T-0306 3" Expansion Coupling x 8-1/4" Height 40 T-0307 4" Expansion Coupling x 9" Height 24

MSTR CTN

QTY

MSTR CTN

QTY

MSTR CTN

QTY

Expansion Couplings

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

ROOF FLASHINGS

Neo-Poly® Roof Flashing

Galvanized Roof Flashing

Aluminum Roof Flashing

Neo-Poly® Roof Flashing

Galvanized Roof Flashing

/Frank Pattern

Injection molded poly base. TPR collar molded onto base to form one-piece permanent bonding of materials. Accommodates roofs from 0 to 45 degrees. Not for hot mop applications. Eliminates leaks by compressing around the pipe, creating a watertight seal. Resists extreme weather conditions and exposure to UV light.

PART NUMBER DESCRIPTION PIPE SIZE

P-6150 8-7/8" x 11-3/4" 1-1/4"–1-1/2" 12 P-6200 8-7/8" x 11-3/4" 2" 12 P-6300 10-3/4" x 13-5/8" 3" 12 P-6400 11-3/4" x 15-3/4" 4" 12

MULTI-FIT

P-7123 10-3/4" x 13-5/8" 1-1/2", 2", 3" 12

Self-sealing design allows for pipe expansion and contraction. Resists weather and exposure to UV light. Use with ABS, PVC, galvanized and cast iron DWV pipe. 25 gauge.

PART NUMBER DESCRIPTION PIPE SIZE

P-4030 8-3/4" x 12-5/8" 1-1/4"–1-1/2" 12 P-4031 8-3/4" x 12-5/8" 2" 12 P-4032 10-3/4" x 14-1/2" 3" 12 P-4033 11-3/4" x 15-1/2" 4" 12

MULTI-FIT

P-8123 10-3/4" x 14-1/2" 1-1/2", 2", 3" 12 P-8034 11-3/4" x 15-1/2" 3", 4" 12

MSTR

CTN QTY

MSTR

CTN QTY

™

Frank Pattern

™

ROOF FLASHINGS

Aluminum Roof Flashing

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Self-sealing design allows for pipe expansion and contraction. Resists weather and exposure to UV light. Use with ABS, PVC, galvanized and cast iron DWV pipe. 25 gauge.

PART NUMBER DESCRIPTION PIPE SIZE

P-4042 8-3/4" x 12-5/8" 1-1/4"–1-1/2" 12 P-4043 8-3/4" x 12-5/8" 2" 12 P-4044 10-3/4" x 14-1/2" 3" 12 P-4045 11-3/4" x 15-1/2" 4" 12

MULTI-FIT

P-9123 10-3/4" x 14-1/2" 1-1/2", 2", 3" 12 P-9034 11-3/4" x 15-1/2" 3", 4" 12

MSTR

CTN QTY

Hard Base Poly® Roof Flashing

Flex-All™ Soft Base Roof Flashing

Poly® Pipe Vent Shield

Hard Base Poly® Roof Flashing

™

Frank Pattern

Flex-All

™

Soft Base Roof Flashing

/Frank Pattern

Flexible design conforms to roof shakes, shingles, and at tile for a universal t. Eliminates leaks by

compressing around the pipe, creating a watertight seal. Resistant to extreme weather temperatures, ultra-violet rays, moisture and salt air corrosion. Use with all plastic DWV pipe systems. Features nail holes for easy installation. Made in the U.S.A.

PART NUMBER DESCRIPTION PIPE SIZE

P-4150 13-1/16" x 8-7/8" 1-1/2" 25 P-4200 13-1/16" x 8-7/8" 2" 25 P-4300 16-5/32" x 11-9/16" 3" 25 P-4400 16-5/32" x 11-9/16" 4" 25

Accommodates 0 to 40 degrees. Flexible design conforms to roof shakes, shingles, and at tile for a universal t. Eliminates leaks by compressing around the pipe, creating a watertight seal. Resistant

to extreme weather temperatures and ultra-violet rays. Use with all plastic DWV pipe systems. Made in the U.S.A.

PART NUMBER DESCRIPTION PIPE SIZE

P-5150 11-1/4" x 8-7/8" 1-1/4", 1-1/2" 25 P-5200 11-1/4" x 8-7/8" 2" 25 P-5300 13-1/4" x 9-7/8" 3" 25

™

ROOF FLASHINGS & VENT SHIELDS

MSTR CTN

QTY

MSTR CTN

QTY

ROOF FLASHINGS & VENT SHIELDS

Poly

Pipe Vent Shield

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Requires no tools or mastics for sealing. Constructed of durable weather resistant materials. For use with ABS, PVC, galvanized or cast iron DWV pipe. Made in the U.S.A.

PART NUMBER DESCRIPTION PIPE SIZE

P-4190 1-1/2" 25 300 P-4191 2" 25 225 P-4192 3" 25 125 P-4193 4" 25 100

MSTR CTN

QTY

CLOSET RINGS & FLANGES

Frank Pattern™ Closet Flanges

Pop Up Closet Flange*

Stabilizer

Light Pour Time-Savers Stokes™ Closet Ring

Ideal for wooden oors or concrete slab applications. Prevents bend or riser from moving to eliminate

water closet rocking. Made in the U.S.A.

Stabilizer

P-3006

PART NUMBER DESCRIPTION PARTS/BAG

P-3006 4" Flush 1 75

/Frank Pattern

MSTR

CTN QTY

™

Light Pour Time-Savers Stokes™ Closet Ring

P-3079

40TCSL

Single piece ring-stabilizer. Preset closet ring heights. Special ring slot for closet bolts. Patented design. Made in the U.S.A.

PART NUMBER DESCRIPTION

P-3070 3/4" H for 3" ABS 20 P-3074 1-1/2" H for 3" ABS 20 P-3076 3/4" H for 4" ABS 20 P-3078 1" H for 4" ABS 20 P-3080 1-1/2" H for 4" ABS 20 P-3079* 1" H for 4" PVC 20

A cast iron closet ange for connecting water closets to a pipe which utilizes a collar squeezing a

resilient gasket against the pipe to provide a water tight, mechanical seal without the problems usually associated with hot lead type of sealant. Available for 3" & 4" cast iron, and ABS pipe systems in various heights, and offset requirements.

PART NUMBER DESCRIPTION

30 3" x 2" Closet Ring 12 30TC 3" x 2" Closet Ring w/ Test Cap 12 40 4" x 2" Closet Ring 12 40TC 4" x 2" Closet Ring w/ Test Cap 12 40TCSL 4" x 2" Closet Ring w/ Test Cap, Slotted 12 44 4" x 4" Deep Closet Ring 4 46 4" x 6" Deep Closet Ring 4 OS40 4" x 2" Closet Ring 3/4 Oset 12

MSTR CTN

QTY

MSTR CTN

QTY

Frank Pattern

™

CLOSET RINGS & FLANGES

The Pop up Closet Flange features a pop up test cap that can hold up to 6 oors of pressure and is

still quickly and easily removed while not being able to fall down the drain. The test cap is below the

top surface of the ange, preventing damage at the work site. It also comes with optional patented pending stainless steel reinforcing inserts to give you the strength and rigidity of a metal closet ange with the corrosion resistance of a plastic ange. 14 oor attachment holes offer options with irregular oor cutouts.

PART NUMBER DESCRIPTION

Pop Up Closet Flange

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

P-3301 PVC w/ Test Cap TBD P-3302 ABS w/ Test Cap TBD P-3303 PVC w/o Test Cap TBD P-3304 ABS w/o Test Cap TBD P-3311 PVC w/ SS Inserts & Test Cap TBD P-3312 ABS w/ SS Inserts & Test Cap TBD

P-3313 PVC w/o SS Inserts or Test Cap TBD P-3314 ABS w/o SS Inserts or Test Cap TBD

*Available Summer 2017

POP UP CLOSET FLANGE 3" X 4"

MSTR CTN

QTY

Frank Pattern™ Cleanouts & Floor Access Covers

Clean Outs

TRAFFIC FUNCTION: The top specified must be strong enough to safely carry the loads of anticipated traffic. The regular nickel bronze top

Access Covers

Cast Iron Cleanouts

is a heavy duty design and can be used for all finished floor areas subject to foot and light vehicular traffic, round, heavy duty cast iron tops should be specified. LSP offers cast iron tops in heavy duty design and non-tractor type covers.

MATERIAL: For most finished floors, scoriated nonskid nickel bronze tops are recommended. Nickel bronze has excellent corrosion resistant qualities, is extremely serviceable, will not discolor and has an attractive surface. Nickel bronze tops will not rust stain the surrounding finished floor areas as cast iron tops sometimes do. The "scuff-buff" action adds to its appearance, giving it a soft patina. Tops are available

™

in special polished cast bronze, for use where tops must blend with other architectural trim.

SELECTION OF BODY: Outlet Type bodies which are used with adjustable floor – level cleanout assemblies are available with two types of outlet connections. No-Hub and Instant Set® which can be effectively used, depending on the type of piping used in the system and compliance with plumbing code stipulations.

Frank Pattern

SELECTION OF TOP TYPE: For general use, the floor access cover are secured with countersunk screws. Where required, these screws may be of the vandal proof variety.

SELECTION FOR TRAFFIC LOAD: All floor access covers are subject to some sort of traffic. For most indoor areas which are subject to foot and light traffic, the regular scoriated nickel bronze top is recommended.

/Frank Pattern

™

FRANK PATTERN™ CLEANOUTS

SELECTION OF MATERIAL: Since the floor areas are of the finished type, polished scoriated nickel bronze tops are recommended. In areas where blending with surrounding architectural trim is a requirement, polished bronze is available. CHROME PLATED BRONZE ACCESS COVER AND FRAMES ARE NEVER RECOMMENDED FOR FLOOR APPLICATIONS. For unfinished areas, heavy duty cast iron tops are recommended.

CLEANOUTS

™

FRANK PATTERN

N404W/4440

4440

CLEANOUTS WITH FLOOR ACCESS COVER

PART NUMBER OUTLET SIZE OUTLET TYPE

N404W/4440 4" No Hub 4

FLUSH FLOOR

PART NUMBER MATERIAL PIPE SIZE

4430 Iron / Brass 2" - 3" 6 4440 Iron / Brass 3" - 4" 6

MSTR CTN

QTY

MSTR CTN

QTY

NICKEL BRONZE CAST IRON FLOOR CLEANOUTS, NO HUB

PART NUMBER DESCRIPTION

N503W/4050R 3" No Hub 5" Round Top 4 N503W/4050S 3" No Hub 5" Square Top 4 N504W/4050R 4" No Hub 5" Round Top 4 N504W/4050S 4" No Hub 5" Square Top 4

N503W/4050S

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

MSTR CTN

QTY

NOTES

NOTES:

/Frank Pattern

™

Frank Pattern

™

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

NOTES

TABLE OF CONTENTS

All Schedule 40 rough-in-kits are available in PVC or ABS, with or without testing capability, in rough-in kits, or complete with

trim kits. Rapid-Fit provides the exibility to accommodate all overow plate variations with a choice of three stopper designs.

TABLE OF CONTENTS

Revolver Rough-In Kits ................................................................................... 83

PVC & ABS Bath Waste Assemblies .............................................................. 84

Designer Finish Trim Kits ................................................................................ 85

Brass & Plastic Bath Waste Assemblies ......................................................... 86

Trim Kits & Accessories .................................................................................. 87

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Revolver Rough-In Kits

REVOLVER ROUGH-IN KITS

Rapid-Fit assemblies with testing feature. Revolver is Rapid-Fit’s premier product, incorporating

a unique, integrated knock-out test feature and snap-on overow plate. The Dual-Test feature provides overow/drain plugs and hardware to test and then mount 1 hole faceplates.

Half Kit - PVC

R-6011-RK

Half Kit - ABS

R-6010-RK

R-0910

PVC ABS DESCRIPTION

HALF KITS – INCLUDE OVERFLOW ELBOW, CP STRAINER & DRAIN ELBOW (NO PIPING OR TEE)

R-6011-RK R-6010-RK Revolver, snap-on overow plate (no hole) 20 R-0468-RK R-0467-RK 1 or 2 hole overow plate 20

FULL KITS – INCLUDE OVERFLOW ELBOW, CP STRAINER, DRAIN ELBOW, PIPING AND TEE

R-6111-RK R-6110-RK Revolver, snap-on overow plate (no hole) 20 R-0466-RK 1 or 2 hole overow plate 20

LIFT & TURN

TRIM KITS – INCLUDE CP STOPPER AND OVERFLOW PLATE

R-0910 R-0919 R-0916 Revolver, snap-on overow plate (no hole) 20 R-0929 R-0929-P R-0929-T 1 hole overow plate 20 R-0934 R-0934-T 2 hole overow plate 20

PUSHPULL

TOETOUCH

DESCRIPTION

MSTR

CTN QTY

MSTR CTN

QTY

REVOLVER ROUGH-IN KITS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Bath Waste Assemblies

PVC & ABS BATH WASTE ASSEMBLIES

R-6111-LT

R-6110-LT

Dual-Test Overow Testing

Revolver Overow Testing

w/ Integrated Knock-out

PVC ABS DESCRIPTION

HALF KITS – INCLUDE OVERFLOW ELBOW, CP OVERFLOW PLATE, DRAIN ELBOW, CP STRAINER & CP STOPPER (NO PIPING OR TEE)

LIFT & TURN

R-6011-LT R-6010-LT Revolver, snap-on overow plate (no hole) 20 R-0476 R-0475 1 hole overow plate 20 R-0468 R-0467 2 hole overow plate 20 R-0542 2 hole overow w/ condensate 20

PUSH-PULL

R-6011-P R-6010-P Revolver, snap-on overow plate (no hole) 20 R-0476-P R-0475-P 1 hole overow plate 20 R-0468-P R-0467-P 2 hole overow plate 20 R-0542-P 2 hole overow w/ condensate 20

TOE-TOUCH

R-6011-T R-6010-T Revolver, snap-on overow plate (no hole) 20 R-0476-T R-0475-T 1 hole overow plate 20 R-0468-T R-0467-T 2 hole overow plate 20 R-0542-T 2 hole overow w/ condensate 20

PVC ABS DESCRIPTION

FULL KITS – INCLUDE OVERFLOW ELBOW, CP OVERFLOW PLATE, DRAIN ELBOW, CP STRAINER, CP STOPPER, PIPING AND TEE

LIFT & TURN

R-6111-LT R-6110-LT Revolver, snap-on overow plate (no hole) 20 R-0376 R-0364 1 hole overow plate 20 R-0466 R-0465 2 hole overow plate 20

PUSH-PULL

R-6110-P Revolver, snap-on overow plate (no hole) 20 R-0364-P 1 hole overow plate 20

R-0466-P R-0465-P 2 hole overow plate 20

TOE-TOUCH

R-6111-T R-6110-T Revolver, snap-on overow plate (no hole) 20 R-0376-T R-0364-T 1 hole overow plate 20 R-0466-T R-0465-T 2 hole overow plate 20

Bath waste assemblies available in Designer Finishes upon special request. CP=Chrome Plated

MSTR

CTN QTY

MSTR

PVC & ABS BATH WASTE ASSEMBLIES

Testing Drain Plug w/ Strainer

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

Lift & Turn Stopper

Push-Pull Stopper

Toe-Touch Stopper

DESIGNER FINISH TRIM KITS

Designer Finishes with PVD process coating. Each kit includes a strainer, premium stopper, and

overow plate.

Lift & Turn Stopper –

Shown with No Hole

Revolver Overow Plate

REVOLVER SNAP ON

R-0970 R-0971 R-0972 Chrome 20 R-0986 R-0980 R-0992 Satin Nickel 20 R-0987 R-0981 R-0993 Oil Rubbed Bronze 20 R-0976 R-0967 R-0965 White 20 R-0935 R-0936 R-0937 Venetian Bronze 20

REVOLVER SNAP ON

R-0986-P R-0980-P R-0992-P Satin Nickel 20 R-0987-P R-0981-P R-0993-P Oil Rubbed Bronze 20 R-0976-P R-0967-P R-0965-P White 20

1 HOLE OVERFLOW PLATE

R-0971-P R-0972-P Chrome 20

2 HOLE OVERFLOW PLATE

FINISH

MSTR CTN

QTY

MSTR CTN

QTY

DESIGNER FINISH TRIM KITS

Push-Pull Stopper –

Shown with 1 Hole

Overow Plate

Toe-Touch Stopper –-

Shown with 2 Hole

Overow Plate

REVOLVER SNAP ON

R-0986-T R-0980-T R-0992-T Satin Nickel 20 R-0987-T R-0981-T R-0993-T Oil Rubbed Bronze 20 R-0976-T R-0967-T R-0965-T White 20 R-0970-T R-0971-T R-0972-T Chrome 20

1 HOLE OVERFLOW PLATE

2 HOLE OVERFLOW PLATE

FINISH

MSTR CTN

QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

1 1/2" Brass

1 1/2" Plastic Tubular

Accessories/Replacement Parts

Brass Trip Lever

Rapid-Test Plugs

R-5000

BRASS & PLASTIC BATH WASTE ASSEMBLIES

Fast and easy adjustment. Available in Brass Compression Joint or Solder Connection. Tubular construction.

PART NUMBER DESCRIPTION FINISH

BRASS - TRIP LEVER

R-5000 17 Ga. Compression Chrome Plated 12 R-5500 20 Ga. Compression Chrome Plated 12

BRASS - LIFT & TURN

R-8000 20 Ga. Compression Chrome Plated 12 R-8020* 17 Ga. Solder Conn. Chrome Plated 12 R-8030* 17 Ga. Solder Conn. Polished Brass 12 R-8500 20 Ga. Compression Chrome Plated 12

BRASS - TOE TOUCH

R-9000 17 Ga. Compression Chrome Plated 12

*Coning fall 2017.

MSTR CTN

QTY

Brass Lift & Turn

R-8020

Brass Toe-Touch

R-9000

BRASS & PLASTIC BATH WASTE ASSEMBLIES

Rapid-Test Plugs

R-1287

Fast and easy linkage adjustment. Available in Chrome Plated only. Made of tubular construction.

PART NUMBER DESCRIPTION FINISH

PLASTIC - TRIP LEVER

R-0500 ABS Trip Lever Chrome Plated 20 R-0550 PVC Trip Lever Chrome Plated 20 R-0650 PVC Turn & Twist Chrome Plated 20

PART NUMBER DESCRIPTION FINISH

R-03710 Brass Compr. Ring 3

For use when testing Schedule 40 waste overows with 1 hole faceplates. Reusable. Holds a two-story

test. Easy grip wing nut.

PART NUMBER DESCRIPTION

R-1287 Rapid Test Kit 100 R-60060 2 Hole Test Kit 200

MSTR CTN

QTY

MSTR CTN

QTY

MSTR

CTN QTY

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

1 Hole Lift & Turn and Coarse Thread Bushing Kits

2 Hole Lift & Turn and Coarse Thread Bushing Kits

1 Hole Toe-Touch and Coarse Thread Bushing Kits

Lift & Turn Stopper with Reversible Stem

Toe Touch Stopper

TRIM KITS & ACCESSORIES

Adapter bar required for 1 hole overow plate. Designed with theft and vandal-resistant, solid brass lift and turn. Includes 1-5/8" – 16 TPI ne thread strainer body. Comes complete with 1-1/2" – 11-1/2 TPI adapter bushing. Fits most bath wastes. Includes 1 hole overow plate with screw. Patented design.

1 Hole Lift & Turn and Coarse

Thread Bushing Kit

2 Hole Lift & Turn and Coarse

Thread Bushing Kit

1 Hole Toe-Touch and Coarse

Thread Bushing Kit

PART NUMBER FINISH PACKAGING

RFT-100-C Chrome Plated Clamshell 20 RFT-100-B Polished Brass Clamshell 20 RFT-100-SN Satin Nickel Clamshell 20 RFT-100-ORB Oil Rubbed Bronze Clamshell 20 RFT-100-VB Venetian Bronze Clamshell 20

Designed with theft and vandal-resistant, solid brass lift and turn. Includes 1-5/8" – 16 TPI ne thread

strainer body. Comes complete with 1-1/2" – 11-1/2 TPI adapter bushing. Fits most bath wastes.

Includes 2 hole overow plate with screws. Patented design.

PART NUMBER FINISH PACKAGING

RFT-102-SN Satin Nickel Clamshell 20 RFT-102-ORB Oil Rubbed Bronze Clamshell 20 RFT-102-VB Venetian Bronze Clamshell 20

Features the original and most trouble-free toe-touch stopper in the industry. Includes 1-5/8" – 16 TPI

ne thread strainer body. Comes complete with 1-1/2" – 11-1/2 TPI adapter bushing. Fits most bath wastes. Includes 1 hole overow plate with screw.

PART NUMBER FINISH PACKAGING

RFT-200-C Chrome Plated Clamshell 20

MSTR CTN

QTY

MSTR CTN

QTY

MSTR

CTN QTY

TRIM KITS & ACCESSORIES

Lift & Turn Stopper includes reversible 3/8" and 5/16" stem. Allows theft-resistant installations. Fits most non-trip lever strainers. Patented design.

PART NUMBER FINISH PACKAGING

Stopper with Reversible Stem

Toe Touch Stopper

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

RFT-101-C Chrome Plated Clamshell 20

The original and most trouble-free toe-touch stopper in the industry. Simply push stopper to open or close. Activated by rubber boot. No springs to wear out. Accommodates 1-1/4" deep strainer body.

PART NUMBER

RFT-201-B 3/8" thread Polished Brass Clamshell 20 RFT-201-C 3/8" thread Chrome Plated Clamshell 20

DESCRIPTION FINISH PACKAGING

MSTR CTN

QTY

MSTR CTN

QTY

TABLE OF CONTENTS

Chemicals

LSP offers a broad range of high strength PVC, CPVC and ABS solvent cements, primers, cleaners, and thread sealants ideally formulated for a variety of pipe joining applications. All LSP cements, primers, cleaners and thread sealants are low in volatile organic components (Low VOC) that readily evaporate into the atmosphere. These Low VOC products provide

functional performance alternative that are environmentally friendly. The thread sealants are specically designed for

thread-locking, lubrication and a sure water seal.

TABLE OF CONTENTS

Solvent Cements & Primers ............................................................................89

Pipe Thread Sealants ......................................................................................93

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

SOLVENT CEMENTS & PRIMERS

Solvent Cements & Primers Selection Guide

PVC

BODY

REGULAR

MEDIUM

BODY

HEAVY

EXTRA-

COLOR

CLEAR

BLUE

BODY

BLUE

AQUA

CLEAR

GRAY

CLEAR

GRAY

WET CONDITIONS

ALL WEATHER

FLEXIBLE PVC

EXTRA HEAVY

IN.

NOMINAL

PIPE SIZE

600C

REGULAR

605C

MEDIUM

621B

IRRIGATION

625B

627C

695C

617C/G

HEAVY

619G

1/2

3/4

1-1/222-1/2

100

125

150

200

250

300

450

600

800

SOLVENT CEMENTS & PRIMERS

CPVC

ABS

SPECIALTY

PRIMER

BODY

MEDIUM

BODY

REGULAR

BODY

HEAVY

YELLOW

ORANGE

GRAY

BLACK

CLEAR

GREEN

CLEAR

PURPLE

PRIMER CLEANER

CLEAR

PURPLE

CLEAR

6FG

ONE-STEP

613O

REGULAR

614G

HEAVY

673BK

ABS

690C

UNIVERSAL

694C/GN

TRANSITION

670C/P

PRIMER

640C/P

CLEANER

CTS

ALL CLASSES AND SCHEDULES

100

125

150

200

250

300

450

600

800

COLOR

NOMINAL

PIPE SIZE

IN.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

1/2

3/4

1-1/222-1/2

PIPE FORMAT: SCHEDULE 40 SCHEDULE 80

Handling / Set Schedule*

Solvent Cements & Primers Installation Guide

Solvent Cements & Primers Case Quantity Guide

SOLVENT CEMENTS & PRIMERS

Pipe Size

Temperature

60° - 100° F

16° - 38° C

40° - 60° F

5° - 16° C

0° - 40° F

-18° - 5° C

*The handling / set schedule is the time required before handling the joint. In case of damp/humid weather or loose tting joints, allow 50% additional cure time.

1/2" to 1-1/4"

15mm to 30mm

2 minutes 5 minutes 30 minutes 2 hours 4 hours

5 minutes 10 minutes 2 hours 8 hours 16 hours

10 minutes 15 minutes 12 hours 24 hours 48 hours

Pipe Size

1-1/2" to 3"

40mm to 75mm

Pipe Size

4" to 8"

100mm to 200mm

Pipe Size

10" to 16"

250mm to 400m

Pipe Size

16"+

400mm+

Average Number of Joints per Quart

Pipe Diameter

1/2’

15mm

Total Joints 325 240 180 120 80 50 30 15 7 4 2

3/4"

20mm1"25mm

1-1/2"

40mm2"50mm3"75mm4"100mm6"150mm8"200mm

10"

250mm

Joint / Cure Schedule*

Relative Humidity

60% or less

Temperature dur-

ing assembly and

cure periods

Pipe Size

1/2" to 1-1/4"

15mm to 30mm

Up to

180 PSI

12.4 Bar

180 PSI+

12.4 Bar+

Pipe Size

1-1/2" to 3"

40mm to 75mm

Up to

180 PSI

12.4 Bar

180 PSI+

12.4 Bar+

Pipe Size

4" to 8"

100mm to 200mm

Up to

180 PSI

12.4 Bar

180 PSI+

12.4 Bar+

Pipe Size

10" to 16"

250mm to 400m

Up to

100 PSI

7 Bar

Pipe Size

400mm+

Up to

100 PSI

7 Bar

12"

300mm

16"+

60° - 100° F

16° - 38° C

40° - 60° F

5° - 16° C

SOLVENT CEMENTS & PRIMERS

0° - 40° F

-18° - 5° C

*The handling / set schedule is the time required before handling the joint. In case of damp/humid weather or loose tting joints, allow 50% additional cure time.

15 min 6 hrs 30 min 12 hrs 1-1/2 hrs 24 hrs 48 hrs 72 hrs

20 min 12 hrs 45 min 24 hrs 4 hrs 48 hrs 96 hrs 6 days

30 min 48 hrs 1 hr 96 hrs 3 days 8 days 8 days 14 days

ALL THE DATA SHOWN ABOVE IS BASED ON LABORATORY TESTING. CHARTS SHOULD BE

USED AS A GENERAL GUIDE, AS CONDITIONS IN THE FIELD MAY VARY.

Master Carton Quantities of Solvent Cements & Primers

Can Size 1/2 Pint Pint Quart Gallon

Master Ctn 24 12 12 6

Each product is labeled with a numbered extension to clearly identify the size of the can. 1/2 Pint cans are -2, Pint cans are -3, Quart cans are

-4 and Gallon cans are -5.

Example: An item with the product number 625B2 would be a case of 1/2 Pint PVC Cement and would contain 24 cans per case.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

SOLVENT CEMENTS & PRIMERS

PRODUCT PIPE SIZE

600 REGULAR BODY

For use on pipes and joints in potable drinking water, DWV (Drain/Waste/Vent), irrigation, pool & spa and electrical conduit systems.

605 MEDIUM BODY

Recommended for all types and grades of PVC in potable drink ing water, DWV (Drain/Waste/ Vent), irrigation, pool & spa, and electrical conduit systems. Can be used without primer on non-pressure systems if local codes allow.

617 HEAVY BODY

Recommended for all types and grades of PVC in potable drinking water, DWV (Drain/ Waste/Vent), irrigation, pool & spa, and electrical conduit systems. Heavy body

provides good gap lling

properties. Medium set time provides longer working time. Very high strength industrial grade cement.

For all PVC through 4", excluding SCH 80

For all PVC

through 6" / SCH 80 thru 4"

For all PVC through 12"

BODY/

SET

Regular /

Fast

Medium /

Fast

Heavy / Medium

COLORS

Clear

Gray

LISTINGS /

SPECIFICATIONS

SIZES

Pint 600C-3

Quart 600C-4

Gallon 600C-5

Pint 605C-3

Quart 605C-4

Gallon 605C-5

Pint 617C-3

Quart 617C-4

Gallon 617C-5

Pint 617G-3

Quart 617G-4

Gallon 617G-5

SOLVENT CEMENTS & PRIMERS

619 EXTRA HEAVY BODY

Very high strength industrial grade cement for large industrial pipe systems. Perfect for fabricating because of its large

PVC CEMENTS

All solvent cements and primers are made in the U.S.A.

gap lling properties. Slow set

time provides longer working time for larger pipes.

621 IRRIGATION

Very fast setting premium

cement for rigid or exible PVC

in wet conditions for quick pressurization. Perfect for irrigation systems.

625 WET CONDITIONS

Perfect for irrigation, pool and spa, and plumbing applications where wet conditions exist and/or quick pressurization is desired. Can be used without primer on non-pressure systems if codes allow.

627 ALL WEATHER

For use on pipes and joints in potable drinking water, DWV (Drain/Waste/Vent), irrigation, pool & spa and electrical conduit system.

For all PVC through 30"

For all PVC thru 6" / SCH 80 through 4"

Extra

Heavy /

Slow

Medium / Very Fast

Medium /

Fast

Gray

Blue

Aqua

Blue

Clear

Pint 619G-3

Quart 619G-4

Gallon 619G-5

Pint 621B-3

Quart 621B-4

Gallon 621B-5

1/2 Pint

Pint 625B-3

Quart 625B-4

Gallon 625B-5

Pint 627C-3

Quart 627C-4

Gallon 627C-5

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

SOLVENT CEMENTS & PRIMERS

PRODUCT PIPE SIZE

695 FLEX

Special formula for solvent

PVCCPVCABSSPECIALTYPRIMERS & CLEANERS

welding exible PVC to rigid ttings.

6FG ONE STEP CEMENT

One-step CPVC cement can be used without primer if codes allow. For use on CPVC potable water systems including FlowGuard Gold.

613 REGULAR BODY

For use with CPVC potable water systems.

614 HEAVY BODY

Industrial quality CPVC cement for non-chemical systems.

For all PVC through 6" / SCH 80 through 4"

For CPVC CTS through 2" including FlowGuard Gold

For CPVC CTS through 2"

For all CPVC through 12"

BODY/

SET

Medium /

Fast

Medium /

Fast

Regular /

Fast

Heavy /

Medium

COLORS

Clear Quart 695C-4

Yellow

Orange

Gray

LISTINGS /

SPECIFICATIONS

SIZES

1/2 Pint 6FG-2

Pint 6FG-3

Quart 6FG-4

1/2 Pint 613O-2

Pint 613O-3

Quart 613O-4

1/2 Pint 614G-2

Pint 614G-3

Quart 614G-4

673 ABS CEMENT

For use on ABS systems including DWV (Drain/ Waste/Vent), conduit, and foam core.

690 UNIVERSAL CEMENT

For use on PVC, CPVC, and ABS.

694 TRANSITION CEMENT ABS-PVC

For use on transition joints

SOLVENT CEMENTS & PRIMERS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

between ABS and PVC non-pressure systems.

670 PRIMER

Premium, industrial strength, primer used to aggressively soften and prepare PVC and CPVC for solvent cement welding.

640 PRIMER CLEANER

For cleaning and preparing PVC and CPVC surfaces for solvent cement welding.

650 CLEANER

For removing dirt, grease, oil, and other foreign substances from pipe

and tting surface in

preparation for priming and solvent cement welding.

For all ABS through 8"

For all PVC, CPVC, and ABS through 6"

ABS to PVC non-pressure transition joints through 6" dia.

For all PVC and CPVC pipes and

ttings.

For use on all PVC and CPVC pipes

and ttings.

For use on all PVC, CPVC, and ABS pipe and

ttings

Medium /

Fast

Medium /

Fast

Medium /

Fast

Black

Clear

Green

Clear

Purple

Clear

Purple

Clear

F 656

Pint 673BK-3

Quart 673BK-4

Gallon 673BK-5

1/2 Pint 690C-2

Pint 690C-3

Quart 690C-4

Pint 694GN-3

Quart 694GN-4

Pint 670C-3

Quart 670C-4

Gallon 670C-5

Pint 670P-3

Quart 670P-4

Gallon 670P-5

Pint 640C-3

Quart 640C-4

Gallon 640C-5

Pint 640P-3

Quart 640P-4

Gallon 640P-5

Pint 650C-3

Quart 650C-4

Gallon 650C-5

Gold 555

White 222

Heavy Blue (Industrial)

PIPE THREAD SEALANTS

• Slow drying, soft-setting formula allows ample time for assembly or disassembly

• Creamy, non-separating consistency provides excellent thread coverage

• Grit-free sealant ensures leak proof sealing

• For sealing and lubricating all metal and plastic (ABS, PVC, CPVC, Polypropylene & Nylon) piping systems carrying various materials

• Made in the USA

Gold 555

White 222

PART NUMBER SIZE

55502 1/2 Pint 24 55503 Pint 12

• Contains fine PTFE particles for filling cracks and thread imperfections, ensuring a leak-proof seal

• Thick body formula has no smell, won’t stain tile, marble, wood or other finishes and won’t separate in the can

• For sealing and lubricating all metal and plastic (ABS, PVC, CPVC, Polypropylene & Nylon) piping systems carrying various material

• Compatible with FlowGuard Gold

• Made in the USA

PART NUMBER SIZE

22202 1/2 Pint 24 22203 Pint 12

, BlazeMaster® and Corzan

MSTR CTN

QTY

MSTR CTN

QTY

PIPE THREAD SEALANTS

Heavy Blue

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

• Heavy duty, grit-free formula

• Excellent for industrial applications and pipe lines in high vibration environments

• Finely synthesized PTFE particles fill imperfections while never hardening in vibrating connections

• For sealing and lubricating all metal and plastic (ABS, PVC, CPVC, Polypropylene & Nylon) piping systems carrying various material

• Made in the USA

PART NUMBER SIZE

88802 1/2 Pint 24 88803 Pint 12

MSTR CTN

QTY

TERMS & CONDITIONS

LSP ORDER, SHIPMENT AND RETURN POLICIES 2017

LSP orders may be placed by calling LSP Customer Service at (800) 854-3215, faxing to (800) 243-1777 or emailing CustomerService@LSPProducts.com. Hours: 7am-7pm CST MondThursday 7am-6pm CST Friday

Please have Account Number, Company Name, ZIP Code, PO Number and Invoice Number (if applicable) available when contacting us.

• Orders must meet a minimum requirement of $100 net. Exceptions will incur an additional $25 charge.

• Hazardous materials, tub protectors, and lnnofoam, must be purchased in case/bag quantity.

Back Orders: Occasionally, items may be temporarily back ordered. Back Ordered items will not be billed until shipped. Back orders will ship on a different invoice number.

Will Call Orders: Will Call Orders will only be processed after a phone call to LSP Customer Service to conrm inventory position and pick-up time.

LSP Warehouse Hours are 9am-3pm local time.

Broken Carton Orders: A broken carton fee of $5.00 per line item will be applied when orders do not meet case/bag quantities.

Shipments & Deliveries:

• Deliveries can only be made to a physical address; please provide that address when ordering.

• Orders exceeding $1500 net are shipped “full freight allowed” (FFA) i.e., LSP pays freight charges Small Order Delivery: LSP uses FedEx Ground to ship small package orders. Any other method of shipment is only available upon customer’s request and expense.

Freight Delivery: Freight Truck deliveries will be shipped collect or prepaid. Freight Collect means freight will be billed back to the customer. Freight prepaid means LSP will prepay the freight. LSP retains the right to determine method of freight shipment. Any exceptions made at the customer’s request will be at customer’s expense. FFA (“full freight allowed”) limits are established by LSP.

Damages: If a customer is going to refuse a shipment due to damage, contact the shipper and LSP Customer Service must be made before refusing the shipment. If authorization is not received from Customer Service, the customer will be responsible for all freight costs. This includes original shipping costs, if appropriate, and all freight costs incurred due to the refused orde being returned without authorization. A 20% restocking fee on the material will also be charged on any shipment that is refused without proper, prior authorization. The material condition should be clearly written on the bill of lading as either "good" or "damaged" with the number of pieces (Ex. “1 out of 3 pieces damaged”) along with the recipient’s or customer’s signature. If a customer has damaged material and the signed bill of lading does not state that the material was damaged upon receipt, the customer is responsible

for the damaged material and should contact the carrier to le a claim. The customer must retain all packaging material for the carrier's inspection. Please

note: Under no circumstances will LSP be responsible for replacement of damaged material whose signed bill of lading does not clearly state the material as “damaged” upon receipt.

Step 1: Inspect all material thoroughly upon receipt.

Step 2: Check material against packing slip for completeness.

TERMS & CONDITIONS

Step 3: Note on bill of lading and packing slip any damaged goods or shortages with your Company Name, Receiver’s Name, and overall condition of load.

Step 4: Call carrier immediately when your order has been deemed “damaged” or “shorted”. Please have your Pro # and/or invoice # available to reference.

Step 5: Call LSP Customer Service for any material that needs to be replaced due to damage or shortage.

Step 6: All returned products must be in full carton or bagged quantity.

Shortages: Shortage claims must be made to LSP Customer Service within seven days from the date of material receipt. It is the responsibility of

the customer to inspect all material upon receipt. If a shortage has been identied, contact the carrier as well as LSP Customer Service immediately. LSP will not be responsible for any shortage claim made after seven days from the date of material receipt.

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

TERMS & CONDITIONS

Returns: We accept product returns in the original packaging up to one year from the date of purchase. To initiate a return, contact LSP Customer Service at (800) 854-3215 to be issued written approval and provided a return goods authorization form (RGA) prior to returning material. After your return is authorized, please follow the guidelines below:

1. Simply return the material within 30 days of issuance of Return Authorization.

2. Mark all shipping documents with the RMA/RGA number provided by LSP Customer Service and include the RMA/RGA paperwork with the return.

3. Please do NOT write on any of the packaged product being returned.

Certain items may not be returned or may have specic return instructions. Credit will be allowed on material that is in its original, unopened packaging, has not been damaged or modied, is in clean salable condition, and of LSP's current manufacturing design. Credit will be issued on the basis of invoice

price. A 20% restocking fee may be applied to certain returns. Custom orders including fabricated, special order, and customer made-to-order factory direct items, are non-returnable. Return shipping charges are non-refundable.

If upon inspection of the returned product, the material does not meet the requirements above, the product will be scrapped or returned to the customer at the customer's expense without issuance of credit.

TERMS AND CONDITIONS: Payments: In order to ensure proper crediting of accounts, the customer must include remittance information with all payments. Any payment of an

account sent to LSP without a remittance copy or some form of explanation, will be held.

Credits: Any claim against a bill must be made within 30 days from the due date. If there is a question or problem concerning an invoice or its charges, LSP should be contacted immediately.

Pricing: Prices are subject to change without notice. All orders are subject to the prices as they exist at the time of receipt of order. SPECIAL NOTE: LSP reserves the right to make minor product modications and improvements other than what is shown or described in this document

without notice. LSP will not be responsible for providing improvements or updates on previous models.

LIMITED WARRANTY INFORMATION: What is covered: For one year from the date of purchase, LSP Products Group, Inc. will replace free of charge, to the original purchaser only, any

Specialty Products, Tech Specialties®, Rapid-Fit® or Aqua-Flo® product that fails due to defect in material or workmanship. At its option, LSP Products Group, Inc. will provide a full refund of the purchase price.

What is not covered: LSP Products Group, Inc. shall have no obligation under this warranty for leaks or damages caused by abuse, temperatures below 33°F (1°C) and above 180°F (82.2°C), misuse, accident, improper installation, sharp ends, kinking, twisting, unauthorized repair or damage that occurs during shipping. LSP Products Group, Inc. shall not be liable for any incidental or consequential damage resulting from the products or use of the product.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE. Some states do not allow the exclusive of limitation of

incidental or consequential damages, so the above limitation or exclusive may not apply to you. This warranty gives you specic legal rights, and you may

have other rights, which vary from state to state.

LSP Customer Service is here to assist you.

Please feel free to contact us with questions on the above policies.

TERMS & CONDITIONS

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

A Area (Roof Area in Square Feet)

ABS Pipe Acrylonitrile-Butadiene-Styrene Pipe

ASTM American Society for Testing and Materials

C.P. Chrome Plated

Compr. Compression

CPVC Pipe Chlorinated Polyvinyl Chloride Pipe

CTN Carton

CTS Copper Tube Size

DWV Pipe Non-pressure (Vented) Piping Used for Drain, Waste or Vent

F.G.H.T. Female Garden Hose Thread

FT Feet

F.I.P. Female Iron Pipe Thread

GLOSSARY

G.P.M. Gallons per Minute

H.A. Hammer Arrester

H.C. Hard Compression Seal

HS Half-Slit Design

I.D. Inner Diameter

IPS Iron Pipe Size

LL Lead Free

M.G.H.T. Male Garden Hose Thread

GLOSSARY

M.I.P. Male Iron Pipe Thread

O.D. Outer Diameter

PSI Pounds per Square Inch

PVC Pipe Polyvinyl Chloride Pipe

R Rainfall Intensity (Inches/Hour)

S.C. Soft Compression Seal

SCH Schedule

SS Seal Seam Closure Feature

TPI Thread per Inch

WHI Warnock Hersey International, Incorporated

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

INDEX

6FG...............................89

6FG-2 ...........................92

6FG-3 ...........................92

6FG-4 ...........................92

20C ...............................75

20SD.............................75

30..................................79

30C ...............................75

30TC .............................79

40..................................79

40C ...............................75

40TC .............................79

40TCSL ........................79

44..................................79

46..................................79

100EX ...........................75

104BC...........................33

104BW ..........................33

104FC ...........................33

104FW ..........................33

105BC...........................33

105BW ..........................33

105FC ...........................33

105FW ..........................33

107BC...........................33

107BW ..........................33

107FC ...........................33

107FW ..........................33

109BC...........................33

109BW ..........................33

109FC ...........................33

109FW ..........................33

600C .............................89

600C-3 ..........................91

600C-4 ..........................91

600C-5 ..........................91

605C .............................89

605C-3 ..........................91

605C-4 ..........................91

605C-5 ..........................91

613O .............................89

613O-2..........................92

613O-3..........................92

613O-4..........................92

614G .............................89

614G-2..........................92

614G-3..........................92

614G-4..........................92

617C .............................89

617C-3 ..........................91

617C-4 ..........................91

617C-5 ..........................91

617G .............................89

617G-3..........................91

617G-4..........................91

617G-5..........................91

619G .............................89

619G-3..........................91

619G-4..........................91

619G-5..........................91

621B .............................89

621B-3 ..........................91

621B-4 ..........................91

621B-5 ..........................91

625B .............................89

625B-3 ..........................91

625B-4 ..........................91

625B-5 ..........................91

627C .............................89

627C-3 ..........................91

627C-4 ..........................91

627C-5 ..........................91

640C .............................89

640C-3 ..........................92

640C-4 ..........................92

640C-5 ..........................92

640P .............................89

640P-3 ..........................92

640P-4 ..........................92

640P-5 ..........................92

650C .............................

650C-3 ..........................92

650C-4 ..........................92

650C-5 ..........................92

670C .............................89

670C-3 ..........................92

670C-4 ..........................92

670C-5 ..........................92

670P .............................89

670P-3 ..........................92

670P-4 ..........................92

670P-5 ..........................92

673BK ...........................89

673BK-3........................92

673BK-4........................92

673BK-5........................92

690C .............................89

690C-2 ..........................92

690C-3 ..........................92

690C-4 ..........................92

694C .............................89

694GN ..........................89

694GN-3 .......................92

694GN-4 .......................92

695C .............................89

695C-4 ..........................92

850-2N ..........................73

850-003 ........................73

850-3N ..........................73

850-4N ..........................73

850-006 ........................73

850-041 ........................73

852N .............................73

852SN...........................73

853N .............................73

853SN...........................73

854N .............................73

854SN...........................73

1313..............................28

1410..............................28

4430..............................80

4440..............................80

5375R ...........................75

5375R-S&S...................75

5375S ...........................75

6200..............................34

7020........................74, 75

7020W/5375R...............75

7020W/5735S ...............75

22202............................93

22203............................93

55502............................93

55503............................93

88802............................93

88803............................93

ACF-1212 .....................32

ACF-1717 .....................32

AP55 .............................32

AP88 .............................32

AP96 .............................32

AP1212 .........................32

AP1414 .........................32

AP1426 .........................32

CHR5375R ...................75

CHR5375S ...................75

DWFA-160-PP ..............48

F-01234-HS ..................62

F-01234-SS ..................62

F-03410-HS ..................62

F-03410-SS ..................62

F-03412-HS ..................61

F-03434-HS ..................62

F-03434-SS ..................62

F-03438-HS ..................61

F-03438-SS ..................61

F-03834-HS ..................62

F-03834-SS ..................62

F-05810-HS ..................62

F-05810-SS ..................62

F-05812-HS ..................61

F-05812-SS ..................61

F-05834-HS ..................62

F-05834-SS ..................62

F-05838-HS ..................61

F-05838-SS ..................61

F-07810-HS ..................62

F-07810-SS ..................62

F-07812-HS ..................61

F-07812-SS ..................61

F-07834-HS ..................62

F-07834-SS ..................62

F-07838-HS ..................61

F-07838-SS ..................61

F-10010-HS ..................62

F-10010-SS ..................62

F-10012-HS ..................61

F-10012-SS ..................61

F-10034-HS ..................62

F-10034-SS ..................62

F-10038-HS ..................61

F-10038-SS ..................61

F-11410-HS ..................62

F-11410-SS ..................62

F-11412-HS ..................61

F-11412-SS ..................61

F-11434-HS ..................62

F-11434-SS ..................62

F-11438-HS ..................61

F-11438-SS ..................61

F-11810-HS ..................62

F-11810-SS ..................62

F-11812-HS ..................61

F-11812-SS ..................61

F-11834-HS ..................62

F-11834-SS ..................62

F-11838-HS ..................61

F-11838-SS ..................61

F-13810-HS ..................62

F-13810-SS ..................62

F-13812-HS ..................61

F-13812-SS ..................61

F-13834-HS ..................62

F-13834-SS ..................62

F-13838-HS ..................61

F-13838-SS ..................61

F-15810-HS ..................62

F-15810-SS ..................62

F-15812-HS ..................61

INDEX

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

INDEX

F-15812-SS ..................61

F-15834-HS ..................62

F-15834-SS ..................62

F-15838-HS ..................61

F-15838-SS ..................61

F-20010-HS ..................62

F-20010-SS ..................62

F-20012-HS ..................61

F-20012-SS ..................61

F-20034-HS ..................62

F-20034-SS ..................62

F-20038-HS ..................61

F-20038-SS ..................61

F-21810-HS ..................62

F-21810-SS ..................62

F-21812-HS ..................61

F-21812-SS ..................61

F-21834-HS ..................62

F-21834-SS ..................62

F-21838-HS ..................61

F-21838-SS ..................61

F-23810-HS ..................62

F-23810-SS ..................62

F-23812-HS ..................61

F-23812-SS ..................61

F-23834-SS ..................62

F-23838-HS ..................61

F-23838-SS ..................61

F-25810-HS ..................62

F-25810-SS ..................62

F-25812-HS ..................61

F-25812-SS ..................61

F-25834-HS ..................62

F-25834-SS ..................62

F-25838-HS ..................61

F-25838-SS ..................61

F-27810-SS ..................62

F-27812-HS ..................61

F-27812-SS ..................61

F-27834-HS ..................62

F-27838-HS ..................61

F-27838-SS ..................61

F-31210-HS ..................62

F-31210-SS ..................62

F-31212-HS ..................61

F-31212-SS ..................61

F-31234-HS ..................62

F-31234-SS ..................62

F-31238-HS ..................61

F-31238-SS ..................61

F-31810-HS ..................62

F-31810-SS ..................62

F-31812-HS ..................61

F-31812-SS ..................61

F-31834-HS ..................62

F-31834-SS ..................62

F-31838-HS ..................61

F-31838-SS ..................61

F-35810-SS ..................62

F-35812-HS ..................61

F-35812-SS ..................61

F-35834-HS ..................62

F-35834-SS ..................62

F-35838-HS ..................61

F-35838-SS ..................61

F-41210-HS ..................62

F-41210-SS ..................62

F-41212-HS ..................61

F-41212-SS ..................61

F-41234-SS ..................62

F-41238-HS ..................61

F-41238-SS ..................61

F-41810-HS ..................62

F-41812-HS ..................61

F-41812-SS ..................61

F-41834-HS ..................62

F-41834-SS ..................62

F-41838-SS ..................61

FS44 .............................34

FT-201-B ......................87

FTG-05-0380-L .............49

GSB-101 .......................16

GSB-101-FX .................16

GSB-201 .......................16

GSB-201-D ...................16

GSB-501 .......................16

GSB-501-FX .................16

GSFS-101.....................16

GSFS-101-FX ...............16

GSFS-201.....................16

HCW24 .........................34

HWH-118-PP ..........49, 58

HWH-124-PP ................58

HWH-148-PP ................58

IMFA-160-PP ................48

K-03410 ........................64

K-03410-SS ..................66

K-03412 ........................63

K-03412-SS ..................65

K-03434 ........................64

K-03434-SS ..................66

K-03438 ........................63

K-03438-SS ..................65

K-05810 ........................64

K-05810-SS ..................66

K-05812 ........................63

K-05812-SS ..................65

K-05834 ........................64

K-05834-SS ..................66

K-05838 ........................63

K-05838-SS ..................65

K-07810 ........................64

K-07810-SS ..................66

K-07812 ........................63

K-07812-SS ..................65

K-07834 ........................64

K-07834-SS ..................66

K-07838 ........................63

K-07838-SS ..................65

K-11810 ........................64

K-11810-SS ..................66

K-11812 ........................63

K-11812-SS ..................65

K-11834 ........................64

K-11834-SS ..................66

K-11838 ........................63

K-11838-SS ..................65

K-13810 ........................64

K-13810-SS ..................66

K-13812 ........................63

K-13812-SS ..................65

K-13834 ........................64

K-13834-SS ..................66

K-13838 ........................63

K-13838-SS ..................65

K-15810 ........................64

K-15810-SS ..................66

K-15812 ........................63

K-15812-SS ..................65

K-15834 ........................64

K-15834-SS ..................66

K-15838 ........................63

K-15838-SS ..................65

K-20010 ........................64

K-20010-SS ..................66

K-20012 ........................63

K-20012-SS ..................65

K-20034 ........................64

K-20034-SS ..................66

K-20038-SS ..................65

K-21810 ........................64

K-21810-SS ..................66

K-21812 ........................63

K-21812-SS ..................65

K-21834 ........................64

K-21834-SS ..................66

K-21838 ........................63

K-21838-SS ..................65

K-23810 ........................64

K-23810-SS ..................66

K-23812 ........................63

K-23812-SS ..................65

K-23834 ........................64

K-23834-SS ..................66

K-23838 ........................63

K-25810 ........................64

K-25810-SS ..................66

K-25812 ........................63

K-25812-SS ..................65

K-25834-SS ..................66

K-25838 ........................63

K-27810 ........................64

K-27810-SS ..................66

K-27812 ........................63

K-27812-SS ..................65

K-27834 ........................64

K-27834-SS ..................66

K-31210 ........................64

K-31210-SS ..................66

K-31212 ........................63

K-31212-SS ..................65

K-31234-SS ..................66

K-31810 ........................64

K-31810-SS ..................66

K-31812 ........................63

K-31812-SS ..................65

K-31834 ........................64

K-31834-SS ..................66

K-35810 ........................64

K-35810-SS ..................66

K-35812 ........................63

K-35812-SS ..................65

K-35834 ........................64

K-41210 ........................64

K-41210-SS ..................66

K-41212 ........................63

K-41212-SS ..................65

K-41234-SS ..................66

K-41810-SS ..................66

K-41812 ........................63

K-41812-SS ..................65

K-41834 ........................64

K-41834-SS ..................66

KDW-148-PP ................57

KDW-160-PP ................57

KDW-172-PP ................57

KDW-184-PP ................57

KDW-360-PP ................57

2727 CHEMSEARCH BLVD., IRVING, TX 75062 | PHONE: (800) 854-3215 | FAX: (800) 243-1777 | LSPPRODUCTS.COM

LSP Products Group 2017 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual