English:
OPERATION
Plug the USB receiver into the USB port of the devices,such as
computers,televisions,TV boxes.It takes about three seconds to install
the drive automatically.The extended cable is for television connection,
to ensure a more stable connection with the TV
SPECIFICATION
Size
354 (L)*131 (W)*19.5 (H)
Weight
310±20g
Keys
89
Connectivity Technology
Wireless
Keyboard Interface
USB Interface
Working Voltage
3V
Working Current
≤5mA
Touchpad Working Current
≤15mA
Sleep Mode
Shallow sleep(after 20s'idle,wake it up by
clicking or touching);Deep sleep(after 15mins'
idle,wake it up by clicking)
Working Distance
8M(without barrier)
Lifespan of Keyboard Cap
≥5 million times
Batteries
2 AAA batteries required
Compatibility
Windows OS/ Android OS/Google OS/Mac
OS/Vista
FUNCTIONS OF MULTIMEDIA COMBINATION KEYS
Fn+F1
Homepage
Fn+F2
Switch to other applications
Fn+F3
Windows setting
Fn+F4
Search
Fn+F5
Operation center
Fn+F6
Secured data encrytion
Fn+F7
Previous page
Fn+F8
Next page
Fn+F9
Music Player
Fn+F10
Previous track
Fn+F11
Play/Pause
Fn+F12
Next track
Combination keys such as Fn+F3、Fn+F4 can function
for the Windows 10 system only.
Other combination keys are available for all Windows systems including Windows 10
In Android Smart TV,functions of combination keys from F1 to F8 are not available
OTHER SPECIAL KEYS
Left Mouse Button
Volume +
Volume -
Mute
Touchpad On/Off
FUNCTIONS OF TOUCHPAD
One finger slides
Move the cursor.
One finger clicks
Click at the place where the
cursor stays
Two fingers slide vertically.
Two fingers slide horizontally.
The scrollbar slides vertically.
The scrollbar slides
horizontally.
Two fingers move oppositely
Zoom in or zoom out the
display area.
3 fingers swipe up
Show Windows Menu
3 fingers swipe down
Show Desktop
3 fingers swipe left
Back
3 fingers swipe right
Forward
Note:
The function that the scrollbar moves horizontally is only available for the
software supporting it,such as web,wps and etc.
FUNCTIONS OF CURSOR CONTROL KEYS
Fn+ =HOME
Fn+ =END
Fn+ =PgUp
Fn+ =PgDn
CONSIDERATION:
If the keyboard fails to connect,you can try to connect again:
Insert the USB receiver into the USB port of the computer or the TV
Ensure that the keyboard is filled with 2 AAA batteries.
Press and hold ESC and k together until the red indicator light flashes and
it begins to connect.The distance between the receiver and the touchpad should
be within 20 cm.The keyboard starts to serve when the red indicator light stops
flashing and the connection is completed.
Connection Current:<30mA
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Loading...