Low Temp Industries TD-1014 User Manual

Rack Dispenser

for trays, dishes

Job: ________________________

Item: _______________________

Quantity: ___________________

or silverware

TD-1620

Shown with optional laminate plastic
panels, silverware, and napkin dispensers

Standard Features

✔ Self-leveling dispensers
✔ Corner bumpers
✔ 4” swivel casters with brakes

Optional Features (specify)

❑ (OO) Silverware dispenser
❑ (PP) Napkin dispenser (pair)
❑ (SS) Stainless steel legs
❑ (TT) Wrap-around bumpers
❑ (YY) Laminate plastic body panels
❑ (ZZ) Stainless steel body panels
❑ 5” Swivel casters

Models

   rack size

❑ TD-1014 10”x14”

❑ TD-1020 10”x20”

❑ TD-1418 14”x18”

❑ TD-1620 16”x20”

❑ TD-1622 16”x22”

❑ TD-2020 20”x20”

Benefits:

Heavy duty stainless steel

construction
Large capacity
Sizes to fit virtually all racks
Mobile, easy to move from

dish-room to serving area
Easy to clean design

P.O. Box 795 • Jonesboro, GA 30237

Tel: [phone] • Fax: [phone]

www.lowtempind.com • [e-mail]

35

Rack Dispenser for trays, dishes or silverware

Job: ____________________________

Item: ___________________________

Quantity: _______________________

length

width

Plan View Elevation View End View

Note: Add 2” for corner bumpers

”

2

/

1

1

36”

”

4

/

1

5

Model Length x width x height Tray Size Approx. Ship Weight

TD-1014 23” x 18” x 36” 10” x 14” 140 lbs.

TD-1020 29” x 23

TD-1418 29” x 23

TD-1620 29” x 23

TD-1622 31” x 23

TD-2020 29” x 27

NOTE: When ordering, please specify body panel color and optional extras.

1

/4” x 36” 10” x 20” 105 lbs.

1

/4” x 36” 14” x 18” 115 lbs.

1

/4” x 36” 16” x 20” 130 lbs.

1

/4” x 36” 16” x 22” 130 lbs.

1

/4” x 36” 20” x 20” 145 lbs.

General Specifications

Top: Top fabricated from a minimum of 14 gauge stainless

steel with square turndown on all sides and corners fully
welded, ground and polished. Top to have #4 satin finish
and all edges having #7 hi-lite finish

Body and Frame: Frame to be 14 gauge stainless steel
construction. Full perimeter top and bottom frame fully
welded, ground and polished to vertical corner uprights
making body frame one integral unit. Non-marking corner
bumpers secured to bottom frame. Body panels to be
fiberglass reinforced polyester (F.R.P.) with smooth exterior
surface. All fiberglass to be flame retardant per specifica­tion ASTM E-162 having a flame spread of 25 or less.

P.O. Box 795 • Jonesboro, GA 30237

Tel: [phone] • Fax: [phone]

www.lowtempind.com • [e-mail]

Dispensers: The top opening shall contain a stainless
steel self-leveling dispenser. Dispensing mechanism shall be
constructed with automatic self-leveling elevators, enclosed
in a stainless steel housing. The elevator mechanisms shall
be field adjustable without the use of tools and be connect­ed to a removable heavy gauge stainless steel carrier.

Casters: Casters to be 4” diameter, non-marking ball
bearing swivel type with brakes on all wheels.

We reserve the right to change specifications and product design without notice. Such revisions
do not entitle the buyer to corresponding changes, improvements, additions or replacement for
previously purchased equipment.

All equipment to be built in accordance with the Underwriters Laboratories. Inc. and the National
Sanitation Foundation, Inc. standards and shall bear the Underwriters Laboratories, Inc. listing
label for safety and the Underwriters Laboratories classification label for sanitation.

03/2007

U.L. SanitationClassified to NSF Standards