Low Temp Industries HM-27 User Manual
Project: _____________________
Item: _______________________
Heated Pass-thru Merchandiser
Standard Features
✔ Lighted signage and graphics
✔ Display area for product labels
✔ Adjustable dividers
✔ Stainless steel interior
✔ Hard-coated shelves
✔ Removable interior components
✔ Infra-red heat strips
Benefits:
Easy to clean
Maximizes presentation
Loads from back
Durable hard-coated shelves
Individual heat controls
for energy savings
Lighted signage “sells”
your product
Protected areas for
product information
✔ Lighted shelves
✔ 6’ cord and plug
✔ 200 powder coat colors
(specify RAL#’s ___________)
✔ Non-skid, Non-marking feet
Optional Features
Quantity: ___________________
Counter Top Models
length
❑ HM-27 27 3/4”
❑ HM-48 48”
❑ HM-39LS (level shelves) 39 1/8”
(specify)
General Specifications
Heated merchandiser models to
have all welded powder coated
exterior and type 304 18-8
stainless steel interior with hardcoated aluminum shelves. Two
infrared heat strips to be located
above each shelf with individual
infinite controls located on rear
of unit and out of heat zone.
Each shelf to be lighted, as well
❑ Custom sign/logo
as the top front display panel,
with separate on/off switches.
Merchandiser shall have protected area in front of each shelf
for product graphics (graphics by
others). All electric components
to be individually fused, and the
merchandiser shall be UL listed.
❑ Other voltages (specify _____________)
❑ Additional divider bars
❑ Stainless steel exterior
❑ Floor stand
❑ French fry section
(consult factory for price)
P.O. Box 795 • Jonesboro, GA 30237
Tel: 770.478.8803 • Fax: 770.471.3715
www.lowtempind.com • colorpoint@lowtempind.com
(specify ___________________________)
U.L. SanitationClassified to NSF Standards
Heated Pass-thru Merchandiser
Front Elevation
29”
29”
27 - 1/2”
39 - 1/8”
30 - 3/4”
27 - 1/2”
Project: _________________________
Item: ___________________________
Quantity: _______________________
L
27 - 3/4”
18 ga. galvanized exterior
with powder coat - verify color
Models HM-27 & HM-48
Plan
Models HM-39-LS
39 - 1/8”
34 - 3/4”
10 - 1/2”9”7 - 3/4” 3-3/4”3-3/4”
24” Double Fluorescent Light
30 - 3/4”
Verify Wording
3-1/4”9-1/4”3”9-1/4”6”
34 - 3/4”
1/4” Thick Plexiglass
4 - 3/4”
30”
10 - 1/2”3”9 - 1/4”7 - 1/4”
GRAL - 24
.060 Aluminum “Hard Coat”
Shelves
Infinite Control
Section
GRAL - 24
S/S Channels for
Aluminum Dividers
10 - 1/2”9”3-3/4”7 - 3/4”3-3/4”
120V/1 208V/1 Estimated
Model Length Height Depth Amps Plug Amps Plug Ship Weight Notes
3
HM-27 27
/4” 34
HM-48 48” 34
1
HM-39-LS 39
/8” 30
Approval/Submittal (signature required)
Model #_________________ Voltage _________________
3
/4” 29” 14.4 5-20P 9.6 14-20P 200 lbs.
3
/4” 29” 26 5-50P 17.0 14-30P 300 lbs.
3
/4” 27 1/2” 15.6 5-20P 10.8 14-20P 300 lbs.
Graphics Select from choices.
❑ Hamburger and fries
❑ Sub sandwiches
Finish:
Stainless Steel ________ Black Powder Coat________
Other ________(specify RAL color)_________________
Adherence to LTI installation instructions is required.
Failure to do so may void the warranty.
Signature ___________________________Date__________
P.O. Box 795 • Jonesboro, GA 30237
Tel: 770.478.8803 • Fax: 770.471.3715
www.lowtempind.com • colorpoint@lowtempind.com
❑ Deli sandwiches
❑ Submit your own graphic (consult factory).
We reserve the right to change specifications and product design without notice. Such revisions
do not entitle the buyer to corresponding changes, improvements, additions or replacement for
previously purchased equipment.
All equipment to be built in accordance with the Underwriters Laboratories. Inc. and the National
Sanitation Foundation, Inc. standards and shall bear the Underwriters Laboratories, Inc. listing
label for safety and the Underwriters Laboratories classification label for sanitation.
01/2013
U.L. SanitationClassified to NSF Standards
Loading...