Low Temp Industries DI-EF-1 User Manual
Super Efficient-
Super Efficient-
Super-Hot
Super-Hot
New Energy Saver Heating Source
JOB _______________________ ITEM #_________
MODEL # PANS
DI-EF-1 1
DI-EF-2 2
DI-EF-3 3
DI-EF-4 4
DI-EF-5 5
DI-EF-6 6
DROP-INS
REVISED
2008
BENEFITS
• NEW 500 Watt (@208V) Heat Source
• NEW individual Solid State Controls
• Versatile, use Wet or Dry
• Fully insulated for use in any counter
• 1 to 6 pan units provide for full menus
• Manifold drains make installation easy
• Single electrical connection
• Fast, easy installation
• Labor saving “easy to clean” design
• Connect to 208V (500 watt) or
120V, 240V (661 watt)
(with appropriate controller)
The Drop-In configuration provides a self contained design
that allows easy installation in any counter, serving line, cart
or table.
U.L. Sanitation
Classified to
NSF Standards
C
STANDARD FEATURES
• Solid State Digital Controls
• 208V, 120V, or 240V (specify)
• Single power supply
• Easy installation
• Each compartment drain manifolded to a common
outlet
OPTIONAL FEATURES
• Small pan divider bars
• Adapter panel (specify)
• Other Voltage, Phase, Cycle
• NSF approved food protectors (contact factory)
SHORT FORM SPECIFICATIONS
Top perimeter frame to be constructed of 14 gauge
stainless steel, welded, ground and polished, with a thermal break provided between the top and heated sections.
Interior pan to be 18 gauge stainless steel, deep drawn,
with coved corners. To be fully insulated with fiberglass
insulation. The exterior jacket to be constructed of 18
gauge galvanized steel. Each compartment to have 500
watt heat source with solid state digital controls.
All switches and controls to be fully accessible.
Units to be UL listed and shall bear the UL and UL
Sanitation seals.
Low Temp Industries, Inc.
P.O.Box 795, Jonesboro, GA 30237
Phone 770 478-8803, Fax 770 471-3715
www. lowtempind.com
info@lowtempind.com
Hot Food Well Drop-Ins
Hot Food Well Drop-Ins
L
Model No. DIM L DIM L’ CUT-OUT
DI-EF-1 16¹⁄₂” 4⁵⁄₈” 22⁵⁄₈” x 14¹⁄₄”
DI-EF-2 30¹⁄₂” 8¹⁄₈” 22⁵⁄₈” x 28¹⁄₄”
26³⁄₄”
¹⁄₂”
9”
6³⁄₄”
L’+2”
DI-EF-3 44¹⁄₂” 11⁵⁄₈” 22⁵⁄₈” x 42¹⁄₄”
DI-EF-4 58¹⁄₂” 15¹⁄₈” 22⁵⁄₈” x 56¹⁄₄”
DI-EF-5 72¹⁄₂” 18⁵⁄₈” 22⁵⁄₈” x 70¹⁄₄”
DI-EF-6 86¹⁄₂” 22¹⁄₈” 22⁵⁄₈” x 84¹⁄₄”
L’
5”
Control Panel
Cut-out
DROP-INS Hot Food Wells Electric Specs.
208V,1 PHASE 120V, 1 PHASE 240V,1 PHASE
Drop-ins Watts Amps Watts Amps Watts Amps
Model No. 208V/1 208V/1 120V 120V 240V/1 240V/1
DI-EF-1 500 2.4 661 5.5 661 2.8
DI-EF-2 1000 4.8 1322 11.0 1322 5.5
DI-EF-3 1500 7.2 1983 16.5 1983 8.3
DI-EF-4 2000 9.6 2644 22.0 2644 11.0
DI-EF-5 2500 12.0 3305 27.5 3305 13.8
DI-EF-6 3000 14.4 3966 33.1 3966 16.5
C
We reserve the right to change specifications and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacement for previously purchased equipment.
ANSI /NSF4
Low Temp Industries, Inc.
P.O.Box 795, Jonesboro, GA 30237
Phone 770 478-8803, Fax 770 471-3715
Loading...