Low Temp Industries CSDR-DR-60P User Manual

Job: ________________________

Drop-In
Pass-Thru Display Refrigerator

Item: _______________________

Quantity: ___________________

Drop-In Models

   length
❑ CSDR-DI-42 P 42 1/4”
❑ CSDR-DI-42 S 42 1/4”

❑ CSDR-DI-60 P 60 1/4”
❑ CSDR-DI-60 S 60 1/4”

Benefits:

Seamless welded stainless

steel construction

Standard Features

✔ Self-closing doors (front & back)
✔ Digital solid-state temperature controller
✔ Door locks
✔ 4 Heavy duty stainless steel shelves
✔ 4 recessed interior fluorescent lights
✔ Self-contained refrigeration system
✔ Double service design (suffix P)

Optional Features (specify)

❑ Single service (suffix S)
❑ Glass or mirror inside back (single service only)
❑ Remote refrigeration system
❑ Lighted signs and graphics (specify) __________
❑ Powder coated exterior (specify) _____________

Easy to load
Large capacity
Adjustable shelves
Interior lights provide product

visability

Powder coated to match your

décor (see options)

Performance

These Heavy Duty, versatile units are
designed to maintain proper hold­ing temperatures and provide fast,
efficient loading and rapid product
delivery. Full sized sliding glass
doors provide easy access and help
maintain approved temperatures.
Interior is easy to clean, and interior
lights maximize product presenta­tion. Drop-in design provides clean,
easy installation.

P.O. Box 795 • Jonesboro, GA 30237

Tel: [phone] • Fax: [phone]

www.lowtempind.com • [e-mail]

Job: ____________________________

Item: ___________________________

Drop-In
Pass-Thru Display Refrigerator

optional lighted display box optional lighted

length

25”

Quantity: _______________________

10”

display box

44”14

”

4

/

3

Plan View Elevation View End View

Model Length Height

w/comp housing

120V/1 phase

Height

Depth Cut-Out Comp. Amps Plug Ship Weight

CSDR-DI-42 P 42 1/4” 44” 58 3/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 400 lbs.

CSDR-DI-42 S 42 1/4” 44” 58 3/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 400 lbs.

CSDR-DI-60 P 60 1/4” 44” 58 3/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 480 lbs.

CSDR-DI-60 S 60 1/4” 44” 58 3/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 480 lbs.

32” 22”

General Specifications

Body To be fully insulated with a seamless 16 gauge

stainless steel, welded, ground and polished exterior.

Interior to be a 20 gauge welded stainless steel liner,
and to contain 4 recessed flourescent lights

Doors Insulated, self-closing glass doors front and back
(except on single service units) with plunger style locks, and
to include 4 stainless steel wire shelves mounted on stain­less steel pilasters and clips.

Refrigeration system to be 1/2 HP air-cooled, hermeti-
cally sealed condensing unit fully connected and tested,
ready to plug in.

P.O. Box 795 • Jonesboro, GA 30237

Tel: [phone] • Fax: [phone]

www.lowtempind.com • [e-mail]

It shall be mounted on a channel base, and system will in­clude 2 each16”x16” louvered access panels of 18 gauge
stainless steel. Louvered panels must be installed in base
unit (by others) to allow straight-through air flow. NOTE:
Cut-out opening must be reinforced to support the weight of
display refrigerator and product load.

We reserve the right to change specifications and product design without notice. Such revisions
do not entitle the buyer to corresponding changes, improvements, additions or replacement for
previously purchased equipment.

All equipment to be built in accordance with the Underwriters Laboratories. Inc. and the National
Sanitation Foundation, Inc. standards and shall bear the Underwriters Laboratories, Inc. listing
label for safety and the Underwriters Laboratories classification label for sanitation.

U.L. SanitationClassified to NSF Standards

05/2007