Low Temp Industries CSDR-DI-42-S User Manual

Project: _____________________

Drop-In Pass-Thru Display Refrigerator

Updated

Design!

  length
❑ CSDR-DI-42 P 42
❑ CSDR-DI-42 S 42

❑ CSDR-DI-60 P 60 1/4”
❑ CSDR-DI-60 S 60 1/4”

Standard Features

✔ Self-closing doors (front & back)
✔ Digital solid-state temperature control
✔ Door Locks
✔ 4 Heavy duty stainless steel shelves
✔ 4 recessed interior LED lights
✔ Self-contained refrigeration system
✔ Double service design (suffix P)

Optional Features

Item: _______________________

Quantity: ___________________

Drop-In Models

1

/4”

1

/4”

(specify)

Benefits:

Seamless welded stainless

steel construction
Easy to load
Large capacity

General Specifications

Refrigeration system to be 1/2 HP

air-cooled, hermetically sealed con­densing unit fully connected and tested,
ready to plug in.
It shall be mounted on a channel base,
and system will include 2 each16”x16”
louvered access panels of 18 gauge
stainless steel. Louvered panels must

www.lowtempind.com • [e-mail]

Adjustable shelves
Interior lights provide

product visability

Powder coated to match

your décor
(see options)

be installed in base unit (by others)
to allow straight-through air flow.
NOTE: Cut-out opening must be
reinforced to support the weight of
display refrigerator and product load.

Body To be fully insulated with a
seamless 16 gauge stainless steel,
welded, ground and polished
exterior.

P.O. Box 795 • Jonesboro, GA 30237

Tel: [phone] • Fax: [phone]

❑ Single service (suffix S)

❑ Glass or mirror inside back

(single service only)

❑ Remote refrigeration system

❑ Lighted signs and graphics

(specify) _____________________

❑ Powder coated exterior

(specify) _____________________

Interior to be a 20 gauge welded
stainless steel liner, and to contain 4
recessed LED lights.

Doors Insulated, self-closing glass
doors front and back (except on single
service units) with plunger style locks,
and to include 4 stainless steel wire
shelves mounted on stainless steel
pilasters and clips.

U.L. SanitationClassified to NSF Standards

Drop-In Pass-Thru Display Refrigerator

Project: _________________________

Item: ___________________________

Quantity: _______________________

Technical Specifications

Model Length Height

CSDR-DI-42 P 42

CSDR-DI-42 S 42

CSDR-DI-60 P 60

CSDR-DI-60 S 60

1

/4” 44” 58

1

/4” 44” 58

1

/4” 44” 58

1

/4” 44” 58

w/comp housing

www.lowtempind.com • [e-mail]

120V/1 phase

Height

3

/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 400 lbs.

3

/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 400 lbs.

3

/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 480 lbs.

3

/4” 25” 323/8” x 223/8” 1/2 H.P. 16 5-20P 480 lbs.

P.O. Box 795 • Jonesboro, GA 30237

Tel: [phone] • Fax: [phone]

Depth Cut-Out Comp. Amps Plug Ship Weight

Approval/Submittal (signature required)

Model #__________________
Adherence to LTI installation instructions is required.
Failure to do so may void the warranty.

Signature ___________________________Date__________

We reserve the right to change specifications and product design without notice. Such revisions do
not entitle the buyer to corresponding changes, improvements, additions or replacement for previously
purchased equipment.

All equipment to be built in accordance with the Underwriters Laboratories. Inc. and the National
Sanitation Foundation, Inc. standards and shall bear the Underwriters Laboratories, Inc. listing label
for safety and the Underwriters Laboratories classification label for sanitation.

01/2013

U.L. SanitationClassified to NSF Standards