Low Temp Industries CPM-MRD-1020 User Manual
Job: ________________________
Item: _______________________
Tubular Rack Dispenser
CPM-MRD-2020
Quantity: ___________________
Models
tray size
❑ CPM-MRD-1020 10”x20”
❑ CPM-MRD-1418 14”x18”
❑ CPM-MRD-1420 14”x20”
❑ CPM-MRD-1620 16”x20”
❑ CPM-MRD-1818 18”x18”
❑ CPM-MRD-1820 18”x20”
❑ CPM-MRD-2020 20”x20”
❑ CPM-MRD-2-1020 10”x20”
Standard Features
✔ Self-leveling dispensers
Optional Features (specify)
❑ (SS) Stainless steel legs
❑ (TT) Wrap-around bumpers
❑ 5” Swivel casters
Benefits:
Heavy duty stainless steel
construction
Large capacity
Sizes to fit virtually all racks
or trays
Mobile, easy to move from
dish-room to serving area
Easy to clean design
P.O. Box 795 • Jonesboro, GA 30237
Tel: 770.478.8803 • Fax: 770.471.3715
www.lowtempind.com • colorpoint@lowtempind.com
34
Tubular Rack Dispenser
Job: ____________________________
Item: ___________________________
Quantity: _______________________
L
”
4
/
W
Verify Tray Size
Plan View End View End View
CPM-MRD-xxxx shown CPM-MRD-2-xxxx shown
Note: Add 2” for corner bumpers.
36”
3
30
”
4
/
1
5
Elevation View
”
4
/
3
30
36”
”
4
/
1
5
L
Verify Tray Size
Plan View
Model L x W x H Tray Size Tray Capacity Tray Stacks Approx. Ship Weight
CPM-MRD-1020 17
CPM-MRD-1418 21
CPM-MRD-1420 22
CPM-MRD-1620 23
CPM-MRD-1818 25
CPM-MRD-1820 25
CPM-MRD-2020 27
CPM-MRD-2-1020 34
NOTE: When ordering, please verify the following information
for proper calibration.
Rack stacking height _____________________________________________
Rack length _____________________________________________________
Rack width _____________________________________________________
Wt. of loaded rack ___________________lbs. ____________________oz.
For cups ____________________________or glasses __________________
Diameter of one piece ___________________________________________
Height of one piece _____________________________________________
Weight of one piece _____________________________________________
Max. dia. of one piece __________________________________________
Height of one glass ______________________________________________
Weight of one glass _____________________________________________
1
/8” x 253/4” x 353/4” 10”x20” 150 1 65 lbs.
1
/8” x 233/4” x 353/4” 14”x18” 150 1 75 lbs.
1
/8” x 253/4” x 353/4” 14”x20” 150 1 75 lbs.
1
/8” x 253/4” x 353/4” 16”x 20” 150 1 80 lbs.
1
/8” x 233/4” x 353/4” 18”x18” 150 1 80 lbs.
1
/8” x 251/4” x 353/4” 18”x 20” 300 2 83 lbs.
1
/8” x 253/4” x 353/4” 20”x20” 300 2 83 lbs.
1
/4” x 253/4” x 353/4” 10”x20” 300 2 90 lbs.
General Specifications
Base and Frame: Base to be fabricated from a minimum of
14 gauge stainless steel with all sides turned square with all
corners fully welded, ground and polished. Underside reinforced
with heavy gauge channels. Base to have non-marking corner
bumpers.
Frame shall be constructed of 1” O.D. 16 gauge stainless steel
tubing bolted to the base.
Dispenser Mechanism: Easily removable self-leveling mechanisms shall be field adjustable without the use of tools and shall be
supplied with a stainless steel tray platform.
Casters: 4” diameter, ball bearing, swivel type casters to be
non-marking and with brakes on all wheels.
We reserve the right to change specifications and product design without notice. Such revisions
do not entitle the buyer to corresponding changes, improvements, additions or replacement for
previously purchased equipment.
All equipment to be built in accordance with the Underwriters Laboratories. Inc. and the National
Sanitation Foundation, Inc. standards and shall bear the Underwriters Laboratories, Inc. listing
label for safety and the Underwriters Laboratories classification label for sanitation.
P.O. Box 795 • Jonesboro, GA 30237
Tel: 770.478.8803 • Fax: 770.471.3715
www.lowtempind.com • colorpoint@lowtempind.com
U.L. SanitationClassified to NSF Standards
03/2007
W
Loading...