Page 1
Model Series: VR
The VR Series wall-mount rack is the quintessential space saver
made to mount equipment using a minimal amount of space.
Available in two, three, or four rack units, this extremely versatile
rack is designed to accommodate equipment of just about any
depth. The VR mounts vertically or horizontally – on a wall or under
a desk – whichever way works best for the project at hand. With
16-gauge certified U.S. steel construction, this efficient design is
made to handle loads up to 200 lbs.
Features:
•
16-gauge steel rack mounts to wall or desk, vertically
or horizontally
• Two 11-gauge steel mounting rails tapped 10-32
• Mounting holes on 8" and 16" centers
• Mounts standard 19" E.I.A. equipment
Spec No. 1225 [09.12.14] Page 1/2
The VR Series rack can be mounted to a desk or
wall, horizontally or vertically. Equipment is stored
vertically when the rack is mounted in a horizontal
position.
• Two rear obrounds for cable management
• 2U, 3U or 4U models
• Load capacity 200 lbs.
• Use two together for four-point mounting
• EIA/TIA compliant
• Made in the U.S.A. with 100% certified U.S. steel
• Smooth black powder epoxy finish
A&E Specifications:
The wall-mount rack for vertical or horizontal use shall be Lowell
Model No. _________. It shall hold up to ____ (2, 3, 4) rack
units of equipment and overall measurements shall be 19.17"W
x 6.00"H x _____"D. Construction shall be formed 16-gauge
steel with a smooth black powder epoxy finish. The rack shall feature mounting holes on 8" and 16" centers and rear obrounds for
cable management.
Model Numbers:
Model N
VR-2 Versatile wall-mount rack 2U 3.94" 6.00" 19.17" 200 lbs.
VR-3 Versatile wall-mount rack
VR-4 Versatile wall-mount rack 4U 7.44" 6.00" 19.17" 200 lbs.
One r
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2014 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com
o.
ack unit (RU or
Des
cr
i
ption
U) = 1.75 inches or 44.45 mm.
3U 5.69" 6.00" 19.17" 200 lbs.
Racking Space
Overall Depth
Overall Height
Overall Width
Load Capacity
Page 2
Spec No. 1225 [09.12.14] Page 2/2
16.00
4.00
8.00
18.31
17.81
19.17
.03 REF
.38 FLANGES
6.00
3.94
9.17"
1
.38" FLANGE
.00"
4
.03" REF
17.81"
18.31"
.00"
8
16.00"
DEPTH
6.00"
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2014 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com
Loading...