Lowell UDE-214 Specifications
Model
UDE Series
Rackmount Utility Drawers
Fully welded steel utility drawer mounts to front rails of 19"
racks using standard EIA spacing. Mounting hardware not
included.
Features
• Fully-welded 16-gauge US steel with smooth black
powder epoxy nish
• Overall measurements: 19"W x 15.07"D (with integral
handle), varied heights (2U, 3U, or 4U)
• Ball-bearing slides for smooth operation
• Plastic bushing in rear for wire pass-through (up to 1.06”
dia.)
• For use with 19" EIA rack
• Load capacity 50 lbs.
• Non-locking
• Made in the USA
A&E Specications
The rackmount utility drawer shall be Lowell Model No.
________ UDE-214, UDE-314, UDE-414), which shall be
fully-welded 16-gauge steel with smooth black powder
epoxy nish. The 19"W x 15.07"D x ____ (2, 3, or 4U)
drawer shall feature ball-bearing slides, an integral handle
and a plastic bushing in the rear for wire pass-through.
Load capacity shall be 50 lbs.
Spec No. 1078 [REV. 01.29.16] Page 1/2
Model No. UDE-214
Options (order separately)
• DFI Series (die-cut foam insert): 15.5" x 14" die-
cut foam insert is pre-scored to pick-and-pull sections
in order to create custom nests for stored equipment.
Includes solid (3/8"H) bottom section. Available for 2U,
3U or 4U drawer.
• CDM (mat liner): 15.5" x 14" non-slip perforated liner
provides a protective barrier above drawer's metal surface.
Model No. Summary
Model No. Description Drawer Size Overall Size*
UDE-214 Rackmount utility drawer (2U) 16.86"W x 14.5"D 3.47"H (2U) x 19"W x 15.07"D
UDE-314 Rackmount utility drawer (3U) 16.86"W x 14.5"D 5.22"H (3U) x 19"W x 15.07"D
UDE-414 Rackmount utility drawer (4U) 16.86"W x 14.5"D 6.97"H (4U) x 19"W x 15.07"D
DFI-2 Die-cut foam insert (for 2U drawer)
DFI-3 Die-cut foam insert (for 3U drawer)
DFI-4 Die-cut foam insert (for 4U drawer)
CDM Non-slip mat liner
*Including integral handle, excluding rear bushing
Lowell makes every effort to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without notication.
©2016 Lowell Manufacturing Company, 100 Integram Dr., Pacic MO 63069 | 800.325.9660 | www.lowellmfg.com
Technical Drawings
Spec No. 1078 [REV. 01.29.16] Page 2/2
MODEL NO.
UDE-214
MODEL NO.
UDE-314
TOP VIEW
16.86
19.00
16.86
14.50
.57
14.50
.57
3.47
SIDE VIEW
.34 18.31 .34
.23
3.00
.23
FRONT VIEW
.57
5.22
SIDE VIEW
.34 18.31
14.50
19.00
14.50
19.00
3.32
3.47
5.07
.34
MODEL NO.
UDE-414
TOP VIEW
TOP VIEW
19.00
16.86
19.00
.57
14.50
1.48
2.25
1.48
FRONT VIEW
.57 14.50
SIDE VIEW
19.00
.34 18.31 .34
1.48
4.00
.57
1.48
FRONT VIEW
5.22
6.826.97
6.97
Lowell makes every effort to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without notication.
©2016 Lowell Manufacturing Company, 100 Integram Dr., Pacic MO 63069 | 800.325.9660 | www.lowellmfg.com
Loading...