Lowell SP-1 Specifications

Model: SP-series

Steel Panel for 19"W EIA racks

Description:

The SP-series of blank rack panels for 19" wide EIA racks
are made with 16-gauge certified US steel and have a

0.625" flange for strength and rigidity. Two of these panels
are mounted to the front of Lowell floor racks to provide
extra support during shipping. They can then be removed
and placed in the top of the rack to close the top opening.
SP-series panels have a durable, black wrinkle powder
epoxy finish. Available as single units or multi-pack car­tons.

Features:

• Composition: 16-gauge US steel

17.375”

0.625”

• Style: flanged (0.625")

• Finish: black wrinkle powder epoxy

• Single, 6-pack or 12-pack cartons

EIA Spacing

.344” .344”

19”

A

• Made in the USA

Model. No. Description Former No. Panel Space (inches) Rack Units Carton Pack

SP-1 Steel Panel (flanged) L3-191 1.75 11
SP-1CC Steel Panel (flanged), Contractor’s Carton L3-191CC 1.75 1 12
SP-2 Steel Panel (flanged) L3-193 3.5 21
SP-2CC Steel Panel (flanged), Contractor’s Carton L3-193CC 3.5 2 12
SP-3 Steel Panel (flanged) L3-195 5.25 31
SP-3CC Steel Panel (flanged), Contractor’s Carton L3-195CC 5.25 36
SP-4 Steel Panel (flanged) L3-197 74 1
SP-4CC Steel Panel (flanged), Contractor’s Carton L3-197CC 74 6
SP-5 Steel Panel (flanged) L3-198 8.75 51
SP-6 Steel Panel (flanged) L3-1910 10.5 61
SP-7 Steel Panel (flanged) L3-1912 12.25 71
SP-8 Steel Panel (flanged) L3-1914 14 81
SP-9 Steel Panel (flanged) L3-1915 15.75 91
SP-10 Steel Panel (flanged) L3-1917 17.5 10 1
SP-11 Steel Panel (flanged) L3-1919 19.25 11 1
SP-12 Steel Panel (flanged) L3-1921 21 12 1

One rack unit = 1.75"

“A” “A”

Spec. No. 1058
(rev. 03.09.11)
pg. 1 of 1

©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660 Fax—

636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to change
specifications and/or improve manufacturing methods without notification. (lowellmfg.com)