Lowell RPSW-KP, RPSW-KEY Specifications
Models: RPSB and RPSW series
Low Voltage Switch (wall plate or rackmount / maintained or momentary closure)
Description:
Switch assemblies provide a low cost, low voltage way to remotely
activate equipment that’s connected to a remote power control (such
s Lowell RPC-series) or sequence controller (such as Lowell SCS-
a
series). Available with momentary (normally open) closure for applications where multiple switches are used to turn equipment on or
off, or maintained closure for single switch applications. Each unit
includes one or two LEDs to show system status and rocker or keyswitch activation. Rear connections are termination strips with wire
capacity up to 18-gauge. Switches are available in two styles:
Switch with Wall Plate: Decora-style white or black plate and
sub-plate. Black models are also ideal for use with 19" rackmount panels that have pre-punched openings (see Lowell panels D3P-ID-1, D3P-ID-2, D8P-ID-3, and D9P-ID-3). “ASM”
models are only for use with sequencers that include the alternate sequence mode option.
Switch with Rackmount Panel: 19"W x 1U steel panel with
single factory-installed switch.
Features:
• Easy to install
• Single pole, single throw with maintained or momentary closure
• Decora-style wall plate or 1U rackmount panel
• One or two LED status indicators
• Key or rocker-switch activation
• Made in the USA
RPSW2-MP RPSW2-MKP
RPSB2-MKP RPSB2-MP
RPSB-MR
Model Description Activation LED Qty Style Color
WALL PLATE:
Wall plate switch with MOMENTARY CLOSURE (for multi-switch use)
RPSB2-MKP Switch momentary SPST key 2-LED 1-gang Decora wall plate black
RPSB2-MP Switch momentary SPST rocker 2-LED 1-gang Decora wall plate black
RPSB-MKP Switch momentary SPST key 1-LED 1-gang Decora wall plate black
RPSB-MP Switch momentary SPST rocker 1-LED 1-gang Decora wall plate black
RPSW2-MKP Switch momentary SPST key 2-LED 1-gang Decora wall plate white
RPSW2-MP Switch momentary SPST rocker 2-LED 1-gang Decora wall plate white
RPSW-MKP Switch momentary SPST key 1-LED 1-gang Decora wall plate white
RPSW-MP Switch momentary SPST rocker 1-LED 1-gang Decora wall plate white
Wall plate switch with MAINTAINED CLOSURE (for single-switch use)
RPSB-KP Switch maintained SPST key 1-LED 1-gang Decora wall plate black
RPSB-P Switch maintained SPST rocker 1-LED 1-gang Decora wall plate black
RPSW-KP Switch maintained SPST key 1-LED 1-gang Decora wall plate white
RPSW-P Switch maintained SPST rocker 1-LED 1-gang Decora wall plate white
RPSB-KP-ASM Switch maintained SPST (for sequencers with ASM only) key 1-LED 1-gang Decora wall plate black
RPSB-KP-ASM Switch maintained SPST (for sequencers with ASM only) key 1-LED 1-gang Decora wall plate white
RACKMOUNT:
Rackmount panel switch with MOMENTARY CLOSURE (for multi-switch use)
RPSB2-MKR Switch momentary SPST key 2-LED 19"W x 1U rack panel black
RPSB2-MR Switch momentary SPST rocker 2-LED 19"W x 1U rack panel black
RPSB-MKR Switch momentary SPST key 1-LED 19"W x 1U rack panel black
RPSB-MR Switch momentary SPST rocker 1-LED 19"W x 1U rack panel black
Rackmount panel switch with MAINTAINED CLOSURE (for single-switch use)
RPSB-KR Switch maintained SPST key 1-LED 19"W x 1U rack panel black
RPSB-R Switch maintained SPST rocker 1-LED 19"W x 1U rack panel black
RPSW-KEY Replacement keys (2) for key-switch models
One rack unit (RU or U) = 1.75"
Spec. No. 1c-402
(rev. 12.05.11)
pg. 1 of 2
©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
A & E Specifications:
Switch assemblies for low voltage remote activation of equipment
shall be Lowell Model ___________. Switch assemblies shall op-
rate in conjunction with a remote power control or sequential
e
power control (ordered separately). Switches shall be ___________
Decora-style wall plate or 1U 19”W rackmount panel) with
(
______________ (momentary or maintained) closure. Switches
shall include ____________ (one or two) status LEDs and
___________ (rocker switch or key-switch) activation. Rear connection termination strips shall have a wire capacity up to 18-gauge.
Typical Wiring:
Momentary Switch
Series RPSB2-M, RPSW2-M
4 conductors
required
Momentary Switch
Series RPSB-M, RPSW-M
3 conductors
required
Maximum wire distances: 24ga: 20,000 ft (aprox. 3.5 miles), 22ga.: 31,200 ft. (aprox. 5.5 miles), 18ga.: 76,800 ft. (aprox. 13.5 miles)
Equipment controlled includes:
ACSPR-RPC1-1509
ACSPR-SCS4-1509
SCS8R-ASM
Equipment controlled includes:
SCS8R
SCS4R
SCS8
Momentary Switch
Series RPSB-M, RPSW-M
3 conductors
required
Maintained Switch
Series RPSB, RPSW
3 conductors
required
Equipment controlled includes:
ACSPR-RPC1-1509
ACSPR-SCS4-1509
SCS8R-ASM
Equipment controlled includes:
RPC Series
SCS4
Spec. No. 1c-402
(rev. 12.05.11)
pg. 2 of 2
©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
Loading...