Lowell LXR-1421 Specifications
odel: LXR-series
M
Lowell LXR rack (26.25"D)
Description:
The LXR is the economical solution for equipment stored in cabinetry
or credenzas, under counters or desks, or in any narrow area. The
slim (19.21") width provides a narrow footprint for mounting standard
19"W EIA equipment. Four corner post rails are imprinted with a scale
in rack unit increments to facilitate cuts if a custom height is needed.
And a wide assortment of options enables the LXRto adapt to a variety of applications as it lets you choose the right components for
each job. Ships unassembled.
Features:
• Economical rack supports loads up to 400 lbs.
• Base and top are 14-gauge steel with vented fronts for natural heat
dissipation.
• Corner post mounting rails are 11-gauge steel tapped 10-32.
• Rack models with a height of 30, 38 or 44 rack units include two
side support brackets for torsional rigidity.
• Ships knocked-down for freight economies.
• Made in the USA with 100% certified US steel.
• Black powder epoxy finish.
Optional:
These optional accessories fit both LVR- and LXR-series racks (order
separately):
• Front Door (LVR-FD series): The front door (solid steel or steel
frame with smoked Plexiglas insert) sits 1.38" from frame and
mounts left or right (without drilling). Includes key lock.
• Rear Access Cover (LVR-RAC series): The rear access cover
has vents at the top and bottom for passive heat dissipation and
includes a key lock for security. The rear access cover will accept
fan panel model FWI-KIT (2 qty.) or FW2-RD (1 qty.) — order
separately.
• Vented Side Panels (LVR---SP series): The side panels extend
1" beyond rack (0.5" front, 0.5" rear), increasing overall rack depth
to 27.25". Each panel is .63" thick, increasing overall rack width to
20.5". The 18-ga. steel panels feature top and bottom vents and
recessed side handles. They can be secured with screws. Sold in
pairs.
• Skirted Mobile Base (LVR-MB26): The 14-ga. steel skirted design
hides four 3" swivel casters and increases rack height by 4.25".
• Skirted Mobile Base for Fine Floors (LVR-MB26F): The 14-ga.
steel skirted design hides four 3" swivel casters and increases rack
height by 4.25". Casters have a special formula rubber tread that
won’t mar floors and a tough polyolefin core that helps absorb
shocks.
• Middle-depth Rails (LVR-RRT series): The 11-ga. steel mounting
rails support rear of rackmounted equipment. Sold in pairs.
• Cable Chase (LVR44-26-CC3): 3"W raceway for cable management is designed to fit a 44U rack.
• Protective Runner Kit (PRK): Set of 4 plastic glides help protect
wood when rack is placed inside a credenza or custom millwork.
• Swivel Casters (LVR-C3S series): Available as a set of 4 swivel,
or 2 swivel and 2 swivel-locking.
• Swivel Casters for Fine Floors (LVR-C3SF series): Special formula rubber tread won’t mar floors while the tough polyolefin core
helps absorb shocks. Available as a set of 4 swivel, or 2 swivel and
2 swivel-locking.
Spec. No. 1114
(rev. 09.22.11)
pg. 1 of 3
©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
T
n
k
s
p
i
h
s
g
i
e
fr
r
fo
n
u
r
e
l
l
a
T
tw
e
d
u
l
c
n
i
ts
e
k
c
a
r
b
our corner post mounting rails feature
F
scale printed in rack unit increments
a
o aid equipment installation.
t
n
w
o
d
-
d
e
k
c
o
t e
h
ts
i
fo
.
s
e
i
m
o
n
o
c
)
ts
i
n
u
k
c
a
r
+
0
3
(
s
o
r
t
r
o
p
p
u
s
e
d
i
i
s
r
to
.
ty
i
d
i
g
i
r
l
a
n
o
R
X
L
l
a
c
i
m
o
n
o
c
e
e
h
Optional:
Vented rear
access cover.
LVR-C3SL:
swivel casters
(2 locking).
Vented side panels
with recessed handles.
Solid steel front
door and skirted
mobile base.
Protective runner
kit helps protect
wood.
3"W
cable chase.
Note: To avoid tipover, use caution when loading or moving a rack
mounted on a mobile base or casters.
A&E Specifications:
Open frame rack shall be Lowell Model ________. Rack shall measure 19.21"W and have a depth of 26-inches. Panel space height
shall be ______ rack units for mounting standard 19" EIA components. Corner post mounting rails shall be 11-gauge steel imprinted
with rack unit increments. Models 30 rack units and taller shall include one pair of side support brackets. Rack shall ship knockeddown. It shall be finished in black powder epoxy and include
assembly/panel mounting hardware.
[Optional: Rack shall include one pair of side panels Model
_______, which shall be 27.25"D. Side panels shall include recessed handles for lift-off access and shall mount to keyhole openings in rack. Rack shall include front door Model ______. Rack shall
include rear access cover Model ______. Rack shall include onepair of middle depth mounting rails Model ________, four support
brackets and hardware. Rack shall include swivel casters Model
________. Rack shall include protective runner kit Model _______.
Rack shall include skirted mobile base Model _______. Rack shall
include 3"W cable chase Model ______.]
odel: LXR-series
M
Lowell LXR rack (26.25"D)
19.21"
26.25"
Top View
19.21"
A
18.31"
Front View
B
06"
.
26.25"
3.92"
3.92"
Side View
Rack with Optional Side Panels: Side panels extend 1" beyond rack (0.5" front, 0.5" rear), increasing depth to 27.25"
Each side panel is .63" thick; two side panels increase overall rack width to 20.5"
19.21"
.63" .63"
27.25"
Side support brackets are
included with tall models
(30U, 38U, 44U).
Spec. No. 1114
(rev. 09.22.11)
pg. 2 of 3
Top View
20.5" 27.25"
A
18.31"
Side ViewFront View
©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
.06"
.63"
Side panels mount
to keyholes in rack.
Loading...