Lowell LWR-2119 Specifications
Heard Everywhere Since 1947
Model No.
LWR-2119
Sectional wall-mount rack
21U x 19.05"D x 23.06"W
Construction & Features
• 16-gauge welded steel backbox and separate mounting
section are shipped in two boxes so the backbox can be
field-installed while the mounting section is loaded with
equipment at the shop.
• Overall measurements: 42.875"H x 19.05"D x 23.06"W.
Useable depth: 16", allowing partial extension of equipment into backbox.
• Load capacity 250 lbs.
• Backbox: 5.80"D with keyhole mounting slots on 16" cen-
ters, 10" x10" opening to mount over electrical pull boxes,
embossed dimples on back plane for installation of
board-mounted accessories, removable knockout panels
on top/bottom, and 2
than optional front door)
• Front Mounting Section: 13.06"D with fully gusseted corners and triple formed (side-to-bottom/side-to-top) wrap
design mounts to backbox from the inside with 2 heavy
duty spring-loaded L-pins (self seating, positive locking).
Pins can be moved to change swing orientation. Strength
equivalent to 3/16" thick steel. Welded sides have vents
and notches to accommodate optional single fan kit.
Beveled front corners. Front vents (top and bottom of
frame). Four knockouts for wireless antennas on rack top
and bottom. One pair adjustable mounting rails, tapped
10-32 (recessed 0.625"). Integral top/bottom rails on
E.I.A. spacing for mounting or lacing. Swing open access
is greater than 90 degrees. Minimum clearance is 13.06"
(+1" for optional front door). Roller closure keeps mounting section closed without mandatory locking.
• E.I.A. compliant, UL 2416 Listed
• Made in U.S.A. with 100% certified U.S. steel.
TM
• PilotPoint
A&E Specifications
The E.I.A. compliant, UL2416 listed, welded sectional wall
rack shall be Lowell Model No. LWR-2119, which shall consist of a backbox and mounting section made in the U.S.A.
from 16 gauge certified U.S. steel. Overall measurements
screws (5.1 hardness, captive washers)
keyed side locks (keyed differently
shall be 42.875"H x 19.05"D x 23.06"W (21U racking space).
The mounting section shall be 13.06"D with triple formed sideto-bottom, side-to-top wrapped construction to achieve
strength equivalent to 3/16" thick steel. It shall include side
vents, one pair adjustable mounting rails tapped 10-32 (with
mounting hardware), four knockouts for antennas (top and
bottom), and integral rails on E.I.A. spacing (top and bottom).
The mounting section shall attach to the backbox on the inside
with two heavy duty, spring-loaded L-pins (self seating, positive locking), which can be attached on either side to alter
swing orientation. The backbox shall be 5.80"D with keyhole
mounting slots on 16" centers, 10" x 10" rear opening, embossed dimples and lacing points on the back plane, knockout
panels with combination knockouts (.75-.5", 1.5-1") on top and
bottom, and two keyed side locks. The rack shall have a black
wrinkle powder epoxy finish.
Spec No. 1617 | Rev. 08.31.15 | pg. 1/2
UL 2416
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2015 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com
Heard Everywhere Since 1947
42.875
BOT TOM VI EW
19.053
2
3.063
TOP V IEW
13.056
5.807
2
3.063
10.00
x
10.00
OPENING
16.0001.781
16.000
3.188
echnical Drawings
T
Spec No. 1617 | Rev. 08.31.15 | pg. 2/2
Measurements are inches.
RACK TOP features 4 knockouts for wireless
antennas (.5"), 2 knockout panels with combination knockouts (.75-.5", 1.5-1.")
RACK BOTTOM features 4 knockouts for wireless antennas (.5"), 1 blank panel, 1 panel with
combination knockouts (.75-.5", 1.5-1.")
5" 23.06" 13.06" (
locks
CORNER INSTALL CLEARANCE:
Allow sufficient clearance for access
to side locks and 90 degree opening
(+1" for optional front door).
NOTE: Drawings show rack with optional front door.
Options (order separately)
• Front Door (surface-mount): Solid steel, fully-vented steel, or smoked plexiglass mounts left or right. (LFD Series)
• Mounting Rails: sold in pairs (RRD-21)
• Single Fan Kit: Single whisper fan is ideal for spot cooling (FW1-KIT)
+1")
door
Model No. Summary
Model No. Description Racking Space Usable Depth Overall Depth Overall Height Overall Width
LWR-2119 Sectional wall rack 36.75" / 933mm / 21U 16" / 406mm 19.05" / 484mm 42.875" / 1089mm 23.06" / 586mm
LFD-21 Solid steel front door
LFD-21FV Fully vented front door
LFD-21P Smoked plexiglass front door
RRD-21 Mounting rails (21U, 1pr)
FW1-KIT Single fan kit
One rack unit (RU or U) = 1.75" or 44.45mm
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2015 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com
Loading...