Lowell LT-810 Datasheet

Heard Everywhere Since 1947

Spec No. 1047 | Rev. 04.27.15 | pg. 1/2

Model No.

LT-810

1x2 Speaker System for Tile Ceilings

• Includes 8" driver, 1x2 grille/subplate

• Infinite baffle (no enclosure)

Quick install speaker system for suspended tile ceilings
features an 8" dual cone driver and 1'x2' fine perforation
grille with subplate. The patented assembly features an
integral T-bar support that quickly replaces half of a non­tegular 2'x2' ceiling tile or one-fourth of a non-tegular
2'x4' ceiling tile. Ideal for commercial paging and back­ground music.

Features

• Driver (810): 8" 15W dual cone driver with 10 oz. mag­net, frequency response of 54Hz-11.6kHz (+6dB);
50Hz-20kHz (+6.6dB) and sensitivity of 97.9dB avg.
measured 1W/1M.

• Grille with subplate (1'x2'): Fine-perforation grille is
designed to provide maximum free-air space for ex­cellent sound transmission while maintaining an unob­trusive appearance in new or existing tile ceilings.
Includes an integral 2' T-bar to support neighboring
non-tegular ceiling tile. Quick install. White finish.

Mounted driver

A&E Specifications

The speaker system for suspended tile ceilings shall be
Lowell Model No. LT-810. The 1'x2' system shall replace
half of a non-tegular 2'x2' ceiling tile or one-fourth of a
non-tegular 2'x4' ceiling tile and shall include an integral
T-bar to support adjacent ceiling tile. Each speaker sys­tem shall include a factory-mounted driver mounted to a
subplate with a fine perforation steel grille finished in
white powder epoxy. The driver shall be 8" dual cone with
a power rating of 15W and dispersion of 95 degrees con­ical. It shall have a magnet weight of 10 ozs., frequency
response of 54Hz-11.6kHz (+6dB), 50Hz-20kHz (+6.6dB)
and sensitivity of 97.9dB avg. measured 1W/1M.

Patented Integral T-Bar supports
adjacent non-tegular ceiling tile.*

Assembly is fabricated with a hole in one corner
and restraint tab in the diagonally opposite cor­ner for (two cable) code compliance. Use the tip
of a screwdriver to bend the tab out for tie-offs.

Fine perforation grille

with domestic &

global components

Driver Specifications (half space)

Driver Size Power Type Ceramic Frequency Dispersion Voice Coil Voice Coil Sensitivity Max Depth Weight
No. Rating Magnet Response @2000Hz -6dB Impedance Diameter 1W / 1M SPL**

810 8" 15W Dual cone 10 oz. 54Hz-11.6kHz (+
50Hz-20kHz (+6.6dB) conical

** Calculated value 1M @ driver power rating.
Additional technical information is available on the spec sheet for driver No. 810.

Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2015 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. [phone] | www.lowellmfg.com

6dB) 95 degrees 8 ohms 1" 97.9dB Avg 109.7dB 2.84" 2.0 lbs.

* U.S. patent no’s. 7,120,269; D467,579; 7,643,647

Heard Everywhere Since 1947

Drawings

Spec No. 1047 | Rev. 04.27.15 | pg. 2/2

1'x2' installation: Replaces half of a non-tegular 2'x2' tile.
Integral T-Bar supports non-tegular tile that was cut.

Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2015 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | tel. [phone] | www.lowellmfg.com