
Heard Everywhere Since 1947
Model No.
LPSR-1226
Rollout Studio Rack
Spec No. 1181 | Rev. 11.15.16 | pg. 1/2
23"W x 25.52"D x 25.98"H
Construction & Features:
Welded Frame:
•
inforced at all loadbearing junctures. The ergonomic design
offers 12U mounting space on a 15-degree slope for easy
viewing of equipment from a seated position.
Front Door:
•
opens from top and slides into base for storage convenience.
Rear Access Cover:
•
removed to access equipment. Keyed differently than front
door.
Welded Sides and Top:
•
cessed handles.
Cutouts:
•
mount (optional) switches for quick access without opening
the door.
Rails:
•
•
•
•
•
• Hardware:
• Finish:
• Origin:
* Height without casters (with casters it's 26.88 in.)
Fixed-position front mounting rails (tapped 10-32) are
numbered on E.I.A. spacing for easy set-up. Rear mounting
holes punched on E.I.A. spacing include 10-32 Tinnerman
clips.
Cable Management:
Swivel Casters
ment and cables.
Load Capacity:
E.I.A./T.I.A.:
Black wrinkle powder epoxy
Made in the U.S.A. with 100% Certified U.S. steel
Fully welded 18-ga. steel construction is re-
Hideaway front door with vents and key lock
Rear cover opens from top and can be
Sides have top/bottom vents, re-
Decorator style cutouts on front provide a way to
Two cable entry ports in rear
Four casters allow pull-out access to equip-
250 lbs. [113 kg]
Compliant
PilotPoint™screws with captive washers
*
A&E Specifications:
The E.I.A./T.I.A. compliant rack shall be Lowell Model No. LPSR1226, which shall measure 25.98 in. high without casters x 23
in. wide x 25.52 in. deep at the base. It shall be fully welded
18-gauge steel construction reinforced at all loadbearing junctures. It shall provide 12U mounting space on a 15-degree slope
with each level providing a different depth for equipment. It shall
have a load capacity of 250 lbs.. The rack shall include integral
side handles, swivel casters, hideaway front door with keyed
lock, rear access cover with keyed lock and cable entry ports,
two front decorator style cutouts with cover plates for external
access to mounted switches (not included), one-pair of fixed position front mounting rails tapped 10-32, and rear mounting
holes with 10-32 Tinnerman clips. Vents for natural heat dissipation shall be provided on sides, front door and rear access
cover. Finish shall be black wrinkle powder epoxy.
Model Number:
Model No. Description Racking Space Rack Height * Overall Width Overall Depth ** Load Capacity
LPSR-1226 Rollout studio rack with sloped front 12U (angled) 25.98 in / 659.89 mm 23.00 in / 584 mm 25.52 in / 648 mm 250 lbs / 113 kg
* Rack height without casters. ** Depth at base.
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2016 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com

Heard Everywhere Since 1947
Spec No. 1181 | Rev. 11.15.16 | pg.2/2
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2016 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com