Lowell LPPR-2432 Specifications
Model: LPPR-2432
Lowell Portable Presentation Rack
Description:
The E.I.A. compliant portable presentation rack is welded 16-ga.
certified U.S. steel with 14-ga. steel bottom and reinforcement at
ll load-bearing junctures. It’s designed for use in educational or
a
professional training facilities, studios, small offices and similar
venues that require a secure equipment rack with mobile convenience. This rack comes complete with a locking Plexiglas front
door, a locking vented rear door, vented side panels, a 1-inch top
with a graphite grey laminate finish, 2-pair of adjustable mounting
rails and a mobile base.
Features:
• Surface-mount front door consists of 1" thick steel frame with
smoked Plexiglas insert, premounted as right-hand swing.
The door can be field-reversed to left-hand swing if desired.
Includes key-lock.
• Steel rear door is vented top and bottom for natural heat dissipation. Includes key-lock.
• Mobile base is an inner platform steel structure with 3” casters
that raise rack height 1.25". Platform is flush to bottom rack
space and can function as a support for heavy equipment
(load rating 1,400 lbs). It also has a center opening for wiremanagement.
• Top is particle board with a graphite grey laminate finish,
rounded corners and rubber edge molding for a premium look.
Top measures 1"H and extends approximately 1" from all
sides of rack.
• Two-pair, adjustable mounting rails (front and rear) feature reversible design with tapped holes in primary position. Rails
can be reversed to access square-punched holes for installations that require cage nuts and 12-24, 6mm or 10-32
screws.
• Abundant cable lacing holes and removable knockout panels
above and below rear door with 0.5" knockouts for BNC wireless antennas and compound knockouts for conduit size
0.75"-.5" and 1.5"-1" and a blank project area for custom
mounts or knockouts on bottom. Includes generous open
space (nearly 2") for cable management between front mounting rail and front-to-rear supports.
• Black wrinkle powder epoxy finish.
• Made in U.S.A.
The smoked
Plexiglas front
door hides
equipment,
while adding a
premium look.
Vents above
and below the
front door, on
side panels and
rear door help
with passive
heat dissipation.
The 1-inch thick particle board top with
graphite grey laminate adds a quality
finish. The top extends 1-inch from all
sides of rack.
The LPPR-2432 portable presentation rack includes a locking
Plexiglas front door, locking vented rear door, vented side
panels, laminate top, mobile base, and 2-pair of adjustable
mounting rails.
A&E Specifications:
The E.I.A. compliant rack shall be Lowell Model LPPR-2432. The
rack shall include a locking rear door, locking surface-mount front
door with smoked Plexiglas insert, side panels, mobile base with
inner platform (1,400 lb. load rating), graphite grey laminate top,
and two pair of adjustable mounting rails tapped 10-32 on one
side and square punched on the other. The rack shall be made
with compound knockouts for 0.75"-.5" and 1.5"-1" conduit and a
blank area for custom use. The side panels, rear door, and area
above and below the front door opening shall feature vents for
passive heat dissipation. The rack assembly (including top and
base) shall measure 50.23"H x 24.69"W x 34.06"D. The rack
shall be finished in black wrinkle powder epoxy.
in the U.S.A. from 16-gauge certified U.S. steel with 14-gauge
steel bottom reinforced at all load-bearing junctures. Removable
knockout panels shall be provided above and below rear door
Model No. Description Rack Rack Overall Height Rack Overall Depth Rack Overall Width Mounting
LPPR-2432 Lowell Portable Presentation Rack 24 48.13" 50.23" 32" 34.06" 23.06" 24.69" 2-pr.
Spec. No. 1032
(rev. 09.30.11)
pg. 1 of 2
©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
Units Height with base & top Depth with base & top Width with base & top Rails
Model: LPPR-2432
Lowell Portable Presentation Rack
Rack Top
34.06"
24.69"
Front View Side View Rear View
23.06"
32.00"
1.00"
50.23"
48.13"
Spec. No. 1032
(rev. 09.30.11)
pg. 2 of 2
©2011 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
Loading...