Lowell LPOR2-1419 Specifications
Model: LPOR-series
Lowell Pull-out Rack – 19"D
Description:
The LPOR pull-out rack was designed for built-in wall and millwork
applications and features heavy-duty slides for smooth pull-out
access to rackmounted equipment. The 14-ga. steel base installs
with screws and can be mounted flush or recessed up to twoinches in a boxed wall or cabinetry to allow room for equipment
protrusions. When equipment is in place and wired, the assembly
is secured in a fixed position with two screws through a perforated
front security panel. The security panel can be removed to facilitate wiring and servicing, allowing the rack to be pulled out from
the wall or millwork.
The rack ships unassembled in two boxes. Box one contains the
rack bottom and base. Box two contains four corner-post mounting rails (two of which are 7U), three cable lacing bars, a perforated front/bottom security cover, a perforated front/top vent panel
and hardware.
Features:
• Versatile low-cost rack for built-in applications is made in the
USA with 100% certified US steel.
• 14-ga. steel base is engineered with two or four slides for pullout access to equipment.
• Load ratings:
Racks with two slides support up to 125 lbs.
Racks with four slides support up to 250 lbs.
• Four corner post rails are 11-ga. steel tapped 10-32. Rear rails
are 7U for all models, front rail height varies by model.
• Two side stiffeners provide torsion rigidity.
• Three cable lacing bars facilitate organized cable management.
• Front/bottom security panel is perforated to match front/top
ventilation panel and screws into position to deter slide out access to equipment.
• Black powder epoxy finish.
• Ships unassembled in two cartons.
The LPOR rack ships unassembled
in two cartons for cost effective
shipping.
Three cable lacing bars
are included for cable
management.
Rear rails on all
models are 7
rack units.
Racks with two slides support
a load up to 125 lbs. Racks
with four slides support a load
up to 250 lbs.
Front security panel installs with
screws to secure base from unauthorized pull-out access.
A & E Specifications:
The rack for built-in application shall be Lowell Model ________.
It shall be 19.06" wide and 19.22" deep. Panel space shall be
______ rack units. The rack shall be made with certified U.S. steel
(14-ga. steel base; 11-ga. steel rails tapped 10-32) and have a
black powder epoxy finish. The rack shall include ________ (two
or four) heavy duty slides, allowing it to slide forward on its base
while supporting a load up to ________ (125 lbs. or 250 lbs.). The
rack shall include three cable lacing bars, two side stiffeners, a perforated front/bottom security panel, and a perforated front/top ventilation panel. Rack shall ship unassembled in two cartons.
Model No. Description Slide Qty Rack Units* Overall D Panel Space Overall H Overall W Load Capacity
LPOR2-719 Lowell Pull-out Rack 2 7 19.22" 12.25” 14.12” 19.06" 125 lbs.
LPOR2-1019 Lowell Pull-out Rack 2 10 19.22" 17.50" 19.37" 19.06" 125 lbs.
LPOR2-1219 Lowell Pull-out Rack 2 12 19.22" 21.00" 22.87" 19.06" 125 lbs.
LPOR2-1419 Lowell Pull-out Rack 2 14 19.22” 24.50” 26.37” 19.06” 125 lbs.
LPOR2-1619 Lowell Pull-out Rack 2 16 19.22" 28.00" 29.87" 19.06" 125 lbs.
LPOR2-2119 Lowell Pull-out Rack 2 21 19.22" 36.75" 38.62" 19.06" 125 lbs.
LPOR4-719 Lowell Pull-out Rack 4 7 19.22” 12.25” 14.12” 19.06” 250 lbs.
LPOR4-1019 Lowell Pull-out Rack 4 10 19.22" 17.50" 19.37" 19.06" 250 lbs.
LPOR4-1219 Lowell Pull-out Rack 4 12 19.22" 21.00" 22.87" 19.06" 250 lbs.
LPOR4-1419 Lowell Pull-out Rack 4 14 19.22” 24.50” 26.37” 19.06” 250 lbs.
LPOR4-1619 Lowell Pull-out Rack 4 16 19.22" 28.00" 29.87" 19.06" 250 lbs.
LPOR4-2119 Lowell Pull-out Rack 4 21 19.22" 36.75" 38.62" 19.06" 250 lbs.
*One rack unit (RU or U) = 1.75"
Spec. No. 1150
(rev. 04.11.12)
pg. 1 of 2
©2012 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax–636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
Model: LPOR-series
18.31
"
17.81
"
19.06
"
12.25
"
16.75
"
1.87
"
19.22
"
19.22
"
38.19
"
7U (12.25")
Rear Rails
on all models
19.13"
19.13"
18.00"
12.00"
19.22"
17.10"
13.50"
C
L
Lowell Pull-out Rack – 19"D
Panel
Space
Overall
Height
Perforated panels.
Front/top provides
provides security from
pull-out access.
Spec. No. 1150
(rev. 04.11.12)
pg. 2 of 2
ventilation.
Front/bottom
unauthorized
©2012 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax–636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)
Load capacity is 125 lbs. for racks with 2-slides
Load capacity is 250 lbs. for racks with 4-slides
All measurements are inches.
Loading...