Lowell LK-FD Datasheet

RSP-500

RSV-BIT

RS-25/100/500

RSV-50

RSR-50

RCN1032-100
cage nuts

Rack Screws & Hardware

descriptions . . . . . . . . .

• RACK SCREWS for 10-32 Threaded Rails (pilot point tip, pre-installed washer): Screws

feature pilot point tip and captive (pre-installed) washer for time saving installation. These
screws may also be used with square-punched rails by adding a cage nut (order separately).

– #RSP-500: Phillips Finish Head — 5.1 hardness, black zinc plated w/painted head, 10-32 x .875

–

RS1224-100

#RS-25, RS-100, and RS-500: Phillips Truss Head — black zinc plated, 10-32 x .75
– #RSV-50: Torx Star Post Head, black, 10-32 x .875
– #RSR-50: Robertson Square Head, black, 10-32 x .875
– #RSM-100 and RSM-500: Premium Phillips Truss Head — 302 stainless steel, black oxide

plated w/wax, 10-32 x .75

• RACK SCREWS for Square-punched Rails (standard tip, separate washer): Rack screws

feature a separate washer and install with cage nuts (order separately).
– #RS1224-100: Phillips Pan Head, black, 12-24 x .787
– #RS6MM-100: Phillips Pan Head, black, 6mm-m6, 1x2cm

• BITS:
– #RSR-BIT: Robertson Square Head pin drive bit
– #RSV-BIT: Torx Star Post Head pin drive bit

LL leg levelers

LK-FD keys

VCW-12 cable
ties

C2S casters

TLK latch

RGH-40 ganging
hardware

• CAGE NUTS:
– #RCN1224-100: Black, 12-24
– #RCN6MM-100: Black, 6mm
– #RCN1032-100: Black, 10-32

• GANGING HARDWARE:
– #RGH-40: 1/4-20 x 5/8” hex and kep nuts for open frame gangable floor racks.

• CASTERS:
– #C2S: Set of four swivel casters, 2-inch dia. (for Lowell LPSR and LDTR racks). Load

capacity for set – 500 lbs.

• LEG LEVELERS:
– #LL: Set of four heavy-duty leg levelers.

• RACK KEYS:
– #LK-FD: Two replacement keys for Lowell rack front door.
– #LK-RD: Two replacement keys for Lowell rack rear door.

• CAM LATCH:
– #TLK: Thumb-turn cam latch replaces key lock to close door without locking it. For Lowell

rear door with standard swing (not top-opening rear access cover).

• CABLE TIES:
– #VCW-12: Bag of 12 hook-and-loop cable ties hold cables out of the way during

installations (8" x .5" ea., 1.75" dia. max. bundle). Suitable for light duty settings, up to
200 re-fastenings.

• BUSHINGS:
– #LGRB-12: Bag of 12 plastic bushings snap into access holes in Lowell LGR Series

gangable racks, to help protect cables running between them.

LGRB-12 bushings

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2019 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069 / tel. [phone] / www.lowellmfg.com

Spec #1193 | Rev. 7-23-2019

pg. 1/2

Rack Screws & Hardware

Dimensions are inches and [mm] unless stated otherwise.

model summary . . . . . . . . . . . . . .

Description Model No. Quantity Package

Rack Screws for 10-32 Threaded Rails (pilot point tip, includes pre-installed washer)

Phillips Truss Head, black zinc plated, 10-32 x .75 RS-25 25-pieces Bag

" RS-100 100-pieces Bag

" RS-500 500-pieces JAR

Premium Phillips Truss Head–302 stainless steel, black oxide plated, 10-32 x .75 RSM-100 100-pieces Bag

" RSM-500 500-pieces JAR

Phillips Finish Head–5.1 hardness, black zinc plated, 10-32 x .875 RSP-500 500-pieces JAR

Robertson Square Head, black, 10-32 x .875 RSR-50 50-pieces Bag

Torx Star Post Head, black, 10-32 x .875 RSV-50 50-pieces Bag

Rack Screws for Square-punched Rails (standard tip, includes separate washer)

Phillips Pan Head, black, 12-24 x .787 RS1224-100 100-pieces Bag

Phillips Pan Head, black, 6mm-m6, 1x2cm RS6MM-100 100-pieces Bag

Bits Robertson Square Head pin drive bit RSR-BIT 1 Bag

Torx Star Post Head pin drive bit RSV-BIT 1 Bag

Cage Nuts 12-24 RCN1224-100 100-pieces Bag

6mm RCN6MM-100 100-pieces Bag

10-32 RCN1032-100 100-pieces Bag

Ganging Hardware 1/4-20 x 5/8” RGH40 40-pieces Bag
Casters Set of 4 (2" dia.) swivel casters (for LPSR / LDTR rack) CS2 1 set Bag

Leg Levelers Set of 4 LL 1 set Bag

Rack Keys Lowell front door keys (B399A) LK-FD 2 Bag

Lowell rear door keys (B644A) LK-RD 2 Bag

Cam Latch Thumb-turn latch TLK 1 Bag

Cable Ties/Wraps Hook & loop cable wraps VCW-12 12-pieces Bag

Bushings Gangable rack bushings LGRB-12 12-pieces Bag

Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2019 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069 / tel. [phone] / www.lowellmfg.com

Spec #1193 | Rev. 7-23-2019

pg. 2/2