Lowell LFD-16P Data Sheet
Spec No. 1024 | Rev. 08.31.15 | pg. 1/2
Heard Everywhere Since 1947
Model:
LFD Series
• Surface-mount front door — solid steel, fully vented
or smoked plexiglass
Construction & Features
• For Lowell rack series LDTR, LER, LFR, LGR,
LGNR, LGVR, LGTR, LPR, LSER, LSGR,
LWBR, LWR, LWSR
• Extends 1" from rack frame, providing 0.75"
space to accommodate equipment knobs
• 20"W x 1"D
• Features integral ecessed handle and lock,
which is keyed differently than the rack's rear
door lock.
• Mounts left or right. Change orientation by mov-
ing two hinges and hinge nutserts on matching
Lowell racks. Hinges install with 10-32 x 1"
socket-head machine screws
• 180-degree swing
• Made in the U.S.A. with certified U.S. steel
• Black plugs cover screws for finished appear-
ance
A&E Specifications
The surface-mount rack front door shall be Lowell
Model No. ________, which shall measure 20"W
x 1"D x ____ rack units. It shall be ____________
(solid steel, fully-vented steel, or steel frame with
smoked plexiglass insert). The door shall mount
to the rack frame with left or right-hand swing and
shall extend 1". The door shall include an integral
recessed handle and key lock.
Solid
Smoked
Plexiglass
Fully-vented
Option (order separately)
• Extra keys (No. LK-FD): Two extra keys
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2015 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com
A
B
T
U
R
N
D
O
O
R
O
V
E
R
1
8
0
O
A
B
Heard Everywhere Since 1947
Changing from right to left swing: Doors mount right or left (with hinges relocated)
to premounted nutserts on each side of the rack frame. This method eliminates drilling
and allows doors to be installed after equipment is loaded.
Spec No. 1024 | Rev. 08.31.15 | pg. 2/2
Relocated lock Position. After
inverting door 180
door lock screws, turn lock 180
and remount.
(2) Phillips machine
screws 10-32 x 1/2"
Door hinge (part 1) relocated position. After inverting
door 180
and remount in the top two hole positions. This part of the
hinge always mounts in the top two hole positions with the open
side down to accept the hinge pin.
,
0
, remove
0,
, remove door hinge screws, turn hinges 1800,,
0
(2) Socket-head machine screws
10-32 x 1" (5/32" Allen wrench provided)
Open side of door hinge
Doors are
shipped with
mounted lock
for right-hand
swing.
Doors are shipped with mounted
hinges for right-hand swing.
(2) Hole plugs to cover screws
Door hinge pin (part 2) mounts to cabinet without drilling. The second
Model No. Summary
Rack Solid Steel Door Fully Vented Steel Door Smoked Plexiglass Door
Height Model No. Model No. Model No.
7U LFD-7 LFD-7FV LFD-7P
10U LFD-10 LFD-10FV LFD-10P
12U LFD-12 LFD-12FV LFD-12P
14U LFD-14 LFD-14FV LFD-14P
16U LFD-16 LFD-16FV LFD-16P
18U LFD-18 LFD-18FV LFD-18P
21U LFD-21 LFD-21FV LFD-21P
24U LFD-24 LFD-24FV LFD-24P
35U LFD-35 LFD-35FV LFD-35P
37U LFD-37 LFD-37FV LFD-35P
40U LFD-40 LFD-40FV LFD-40P
44U LFD-44 LFD-44FV LFD-44P
54U LFD-54 ---------- ----------
Lowell makes every effort to provide accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
©2015 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com
part of the door hinge (pin) is always field installed to factory mounted nutserts.
Nutserts are located on the front left and right of cabinet.
(2) Nutserts (factory installed) on rackframe.
Loading...