Lowell LDSR-718 Specifications
LOWELL Manufacturing Company
Model Series: LDSR
escription:
D
The LDSR Series rack measures 18" [457mm] deep at base and
features a 12-degree slope so equipment can be easily viewed from
a seated position. Sturdy design is 16-gauge certified US steel, with
fixed front mounting rails tapped 10-32 and recessed 0.562" [14mm]
from frame, providing approximately 0.75" [19mm] for equipment
clearance. Open back allows easy access to rear equipment controls. This rack will not accept a front door so equipment with protruding knobs or patch panel connections is not a problem. Rack
includes rubber feet to protect desktop from scratches or you can
order the optional protective runner kit (model PRK) for slide-in applications.
Features:
• Fixed Front Mounting Rails: 1-pr. tapped 10-32
• Protective rubber feet add .5” [13mm] to rack height
• Open base, front and back
• Black wrinkle powder epoxy finish
• Made in the USA
• Suitable for UPS shipping
Spec No. 1120
REV. 01.23.14 (pg. 1/2)
A&E Specifications:
Rack for desktop use shall be Lowell Model __________. It shall
have a 12-degree front slope and measure 21.1"W x 18"D [536mm
x 457mm] at base. Height shall be _______ rack units. Welded assembly shall be 16-gauge steel with fixed front mounting rails tapped
10-32. The rack shall include protective rubber feet. Finish shall be
black wrinkle powder epoxy.
Options:
• Rear Rails: fixed-position rails mount in rear of rack, includes
hardware.
• Rear Access Cover: steel cover closes back of rack. Note: cover
cannot be used in conjunction with (optional) rear mounting rails.
• Protective Runner Kit: plastic glides protect wood surfaces
when rack is installed inside cabinetry.
Model No. Description Racking Height Overall Height Overall Height (w feet) Overall Width Overall Depth
LDSR-718 Desktop rack with sloped front 12.375 in / 314 mm / 7U 14.21 in / 361 mm 14.71 in / 374 mm 21.10 in / 536 mm 18 in / 457 mm
LDSR-1018 Desktop rack with sloped front 17.625 in / 448 mm /10U 19.35 in / 491 mm 19.85 in / 504 mm 21.10 in / 536 mm 18 in / 457 mm
LDSR-1218 Desktop rack with sloped front 21.125 in / 537 mm / 12U 22.77 in / 578 mm 23.27 in / 591 mm 21.10 in / 536 mm 18 in / 457 mm
RRTF-7 1-pr. rear rack rails with hardware 7U
RRTF-10 1-pr. rear rack rails with hardware 10U
RRTF-12 1-pr. rear rack rails with hardware 12U
LDTR-RAC7 Rear Access Cover * 7U
LDTR-RAC10 Rear Access Cover * 10U
LDTR-RAC12 Rear Access Cover * 12U
PRK Protective Runner Kit
One rack unit (RU or U) = 1.75 inches or 44.45 mm. Some measurements have been rounded.
* Rear Access Cover cannot be used in conjunction with optional rear rails.
©2014 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com | Lowell makes every effort to provide
accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
2
1.10
.50
18.31
C
L
TO
C
L
17.81
A
BC
19.35
18.00
13.89
Spec No. 1120
REV. 01.23.14 (pg. 2/2)
Racking
space
A
Front View
21.10” [536mm]
18.31” [465mm]
17.81” [452mm]
Overall
height
Overall height
with feet
.5” [13mm]
Side View
13.89” [353mm]
Overall
height
18” [457mm]
©2014 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069 | 800.325.9660 | www.lowellmfg.com | Lowell makes every effort to provide
accurate information while reserving the right to change specifications and/or improve manufacturing methods without notification.
Loading...