
Model #D3P-ID-1 is a 1U panel for standard width devices.
Model #D3P-ID-2 is a 2U panel for standard or wide-body devices.
100% CERTIFIED
MADE IN
US STEEL
THE U.S.A
Optional DBB Series
blank filler plates
are used to plug
unused positions.
Rackmount Panel #D3P Series
rackmount panel punched for low voltage (decorator style) devices
features. . . . . . . . . . .
• Description: Steel rackmount panels with black nish are pre-punched to hold up
to 3 one-gang, decorator style devices, mounted horizontally. The panels provide
an organized way to mount low voltage devices.
• Construction:
– 16-gauge certified U.S. steel (19"W)
– Three punched openings sized to accept 1-gang decorator style devices, mounted
horizontally.The 1U panel is for standard width devices. The 2U panel can accept
standard or wide-body devices.
– Rear lacing ange for cable/wire management (0.625")
– Pocket-ID™ plastic overlay will hold 1/2"H paper labels (not included). Download
label template at Lowellmfg.com (PocketID-E)
• Finish: Smooth black semi-gloss powder epoxy finish
• Origin: Made in the U.S.A.
• Hardware: Included
• Compliance: EIA compliant
• Optional: (order separately)
– DBB Series: Blank filler plates are used to plug unused positions.
– Device suggestions listed on pg. 2
a&e specifications . . . . . . . .
The rack shall include Lowell panel _______ (#D3P-ID-1, #D3P-ID-2), which shall be
formed steel construction, 19"W x ______ (1U, 2U) with rear lacing flange and three
punched openings sized to accept one-gang, decorator style, low voltage devices,
mounted horizontally. The panel shall have a smooth black powder epoxy finish and
plastic overlays to hold paper labels (not included). The panel shall be made in the
U.S.A. with certified U.S. steel.
Lowell punched panel overview
Panel Overall No. of Device Pocket-ID™ Carton
Model No. Description Space Width Punches Mounted Direction Label Area Pack
D3P-ID-1 Rack panel for decorator device 1U 19.00 [483] 3 horizontal yes 1
D3P-ID-2 Rack panel for decorator device 2U 19.00 [483] 3 horizontal yes 1
D4P-1 Rack panel for decorator device 1U 19.00 [483] 4 horizontal --- 1
D8P-ID-3 Rack panel for decorator device 3U 19.00 [483] 8 vertical yes 1
D9P-ID-3 Rack panel for decorator device 3U 19.00 [483] 9 vertical yes 1
LVC8P-ID-2 Rack panel for volume controls 2U 19.00 [483] 8 --- yes 1
N10P-ID-1 Rack panel for Neutrik-D/Switchcraft-E 3U 19.00 [483] 10 --- yes 1
SG6P-3 Rack panel for standard (1g) wall plate device 3U 19.00 [483] 6 vertical --- 1
Blank Filler Plates (for decorator style punches, unused positions)
DBB-4 Blank filler plate (4 pk.) 1
DBB-50 Blank filler plate (50 pk.) 1
DBB-100 Blank filler plate (100 pk.) 1
Dimensions = inches [mm]; 1U = 1.75"
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2019 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069 / tel. 800.325.9660 / www.lowellmfg.com
Spec #1064 | Rev. 4-29-2019
pg. 1/2

Rackmount Panel #D3P Series
Dimensions are inches and [mm] unless stated otherwise.
technical drawings . . . . . . . . . . . . . .
17.38 [441]
19.00 [483]
TOP
.625
[16]
1.72 [44]
1.25
[32]
MODEL #D3P-ID-2
.25 [6]
.375 [10]
18.31 [465]
FRONT
17.38 [441]
TOP
19.00 [483]
18.31 [465]
FRONT
3.00
[76]
3.47
[88]
SIDE
SIDE
.625
[16]
optional devices (order separately) . . . . . . . . . .
On/off switches are typically mounted in these panels. Remove the wall plate before installing the switch in the panel.
– RPSB-P: maintained closure remote switch, rocker, 1 LED – RPSB-KP: maintained closure remote switch, key, 1 LED
– RPSB-MP: momentary closure remote switch, rocker, 1 LED – RPSB-MKP: momentary closure remote switch, key, 1 LED
– RPSB2-MP: momentary closure remote switch, rocker, 2 LEDs – RPSB2-MKP: momentary closure remote switch, key, 2 LEDs
– RPSB-KP-ASM: maintained closure remote (key) switch, 1 LED
(for sequencers with ASM mode)
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2019 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069 / tel. 800.325.9660 / www.lowellmfg.com
Spec #1064 | Rev. 4-29-2019
pg. 2/2