Lowell ACS1524-2C Series, ACS2024-2C Series Installation Instructions Manual
Lowell Manufacturing Company • 100 Integram Drive • Pacific, Missouri 63069 U.S.A.
Ca ll 800.325.9 660 , 636 .25 7.3 400 • Fa x 636 .257. 660 6 • Cl ic k www. low ell mfg.c om
P/N 16099
pg 1 of 2
Printed in U.S.A. © 10-09-08
ACS1524-2C, ACS2024-2C Series
15/20A Hardwired Mutli-Circuit AC Power Strips - ETL Listed
Installation Instructions
Models Features Installation
Model Specifications
ACS-1524-2C ACS-2024-2C
15 Amp 20 Amp
24 outlets 24 outlets
125 VAC 125 VAC
70"L 70"L
1.5"W 1.5"W
1.625"D 1.625"D
Rack rail mounting channel
Mounting
clip
Nut
Screw
1) Install mounting clip to rack
rail mounting channel using
hardware provided.
2) Align power strip with
mounting clips and snap
into place.
1) Install mounting clip to rack
Z-bracket using hardware
provided.
2) Align power strip with
mounting clips and snap
into place.
Easy installation into Lowell cabinets
and racks with adjustable mounting rails.
Easy installation into Lowell cabinets
with fixed mounting rails.
Mounting
clip
Nut
Screw
Z-bracket in rear of cabinet
● Twenty-four receptacles, 12
per circuit (adjacent receptacles on opposite circuit).
● Symmetrical design, receptacles can be oriented “up” or
“down”.
● Power connections can be
made from either end, or both
ends for feed-through.
● Light colored receptacles for
high visibility inside cabinets,
alternating white and gray
colors indicate separate circuits.
● Dimensions: 70"x1.625"x1.5".
● Long cable ties provided for
securing power supplies (see
detail).
ACS-1524-2C (15A) ACS-2024-2C (20A)
Alternating colors
indicate 2 separate
circuits
White
Gray
White
Gray
Remove cover
Remove knock-out(s) as needed
Pull out pigtails and
identify circuits
Multi-wire branch circuit (shared neutral)
Tuck wires inside chassis and
re-install cover assembly
Pigtails at opposite end can be
utilized as feed-through to
connect additional power strip.
Connect wires
(Two possible wiring options)
Independent circuits and isolated ground
Attach cover
Circuits must be on opposite phases to prevent neutral oveload.
12-3 MC or equiv. with
appropriate connector
12-3 MC or equiv. with
appropriate connector
Isolated ground
connected to
receptacle ground
wire
Chassis ground wire
connected to safety
ground
Connect all
grounds together
ACS1524-2C, ACS2024-2C Series
15/20A Hardwired Mutli-Circuit AC Power Strips - ETL Listed
P/N 16099
pg 2 of 2
Printed in U.S.A. © 10-09-08
Circuit Two
(white recept.)
Chassis ground
(enclosure bonding)
Red
Green
Wht
Wht
Blk
Green
Receptacle
ground
Pull out pigtails, identify circuits.
NOTE: Factory installed push-in connectors suitable for SOLID wire ONLY. For stranded wire remove
and discard push-in connectors and use wire nuts or other suitable connectors (not included).
Green
Green w/yellow strips
Blk
Red
Lowell Manufacturing Company • 100 Integram Drive • Pacific, Missouri 63069 U.S.A. Cal l 80 0. 32 5. 96 60 , 636. 25 7. 34 00 • Fax 636. 25 7. 66 06 • C li ck www.l ow el lm fg .c om
Green
Red
Green
Blk
Blk
Wht
Wht
Wht
Wht
Wht
Loading...