Lowell ACS-1505-SW Specifications

Model: ACS-1505-SW, ACS-1505-SW-SD

15A Power Strip (with switch & cord)

Description:

ETL Listed 15A power strips have 5 single outlets, on/off switch with in­tegral circuit breaker, mounting brackets, detachable cord and optional
two-stage surge suppression. The outlets are spaced to accommodate
power supplies (wall- warts). Fast installation with two mounting brack­ets and hardware( included). Chassis and brackets are steel construction
finished in durable black powder epoxy paint. Detachable IEC cord with
NEMA 5-15P plug.

Features:

• Low profile design (12”L x 2”H x 2”D ) mounts in rack, on shelf, or
under counter with supplied universal mounting brackets.

• Weight: 3 lbs.

• ETL Listed in US and Canada (conforms to UL Standard 60065)

• Optional two-stage surge/transient suppression with LED status indi­cators on front; non-ground contaminating (Normal Mode) design

• Power Rating: 120VAC, 60 Hz, 15A

(NEC Art. 210.21 [B][2] rating 12A)

• Actuation Switch: Combo on/off rocker switch with 15A circuit breaker

• Termination: Detachable 6-ft. IEC cord with molded plug (NEMA 5­15P)

• Outlets: 5 single outlets spaced for power supplies, all switched

ACS-1505-SW includes detachable
cord and universal mounting brackets.

Model No. ACS-1505-SW-SD

only:

• Max Surge Current: 40,000A

• VPR (Ul1449-3): 400V

• Endurance: 1000 WCS* (unlimited low level surges)

• Response Time: 1 nanosecond

• EMI/RFI Noise Atten: 20dB @ 100kHz

• Protection Mode: Line to neutral only. No ground contamination.

Optional:

• ACS-MP: (1U) black aluminum rackmount panel allows ACS-1505­SW power strip to be mounted in 19” EIA format on inside or outside
of rack, or on third rail set inside rack with outlets facing up, down or
sideways.

A & E Specifications:

The power strip shall be Lowell Model ________________. It shall in­clude five 15A outlets spaced for power supplies and an on/off switch
with integral circuit breaker. Power strip shall measure 12"L x 2"H x 2"D
and shall be ETL Listed to UL standard 60065. It shall be capable of
mounting in the rear of a rack or to wall/shelf surfaces using brackets
provided. Termination shall be by detachable IEC cord with NEMA 5-15P
plug. Chassis shall be steel construction with black powder epoxy finish.

[Optional: Unit shall also include two-stage surge/transient suppression
with LED status indicators on front.]

* Worst Case Situation: Defined as power quality disruptions likely to cause fa­cility infrastructure damage such as direct lightening strike, transmission line cross­connection or collapse (from severe storm, ice damage, etc.) sub-station
transformer explosion, etc. Industry standards for residential and commercial serv­ice entrance equipment limit surges entering a facility from external sources to
maximum of 6kV and 10kA.

ACS-1505-SW-SD also includes
two-stage surge protection with
LED status indicators.

Model No. Power Rating Style 5-15P plug Switch Protection Protection Listing L x W x H

ACS-1505-SW 15A, 120 VAC 5 single 6 ft. IEC cord Yes circuit breaker --- ETL 12" x 2" x 2"
ACS-1505-SW-SD 15A, 120 VAC 5 single 6 ft. IEC cord Yes circuit breaker 2-stage ETL 12" x 2" x 2"

Spec. No. 1c-208
(rev. 09.17.12)
pg. 1 of 2

©2012 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)

Outlet Termination On / Off Overcurrent Surge NRTL Chassis

6 foot IEC detachable cord with NEMA 5-15P plug

2"

2"

12"

Universal brackets mount to
screws on the chassis. They are
engineered to mount almost any­where with brackets exposed or
concealed.

Optional rackmount
panel ACS-MP.

Surface mount

with exposed brackets

Surface mount

with concealed brackets

Brackets include multiple hardware sets
for versatile installation (see Dia. A).

(2) Brackets
(2) 1/4"-20 x 1/2" screws
(2) flat nuts
(2) 10-32 x 1/2" screws
(2) cage nuts

Rack mount

to rail supports or rear rail

Spec. No. 1c-208
(rev. 09.17.12)
pg. 2 of 2

©2012 Lowell Manufacturing Company, 100 Integram Dr., Pacific MO 63069. Phone–800.325.9660
Fax—636.257.6606. Lowell makes every effort to provide accurate information while reserving the right to
change specifications and/or improve manufacturing methods without notification. (lowellmfg.com)